Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Alluminio Gyro Mount Aggiornamento Trex 550

Generating Links

Alluminio Gyro Mount Aggiornamento Trex 550

Prezzo:

Now save risparmia 0,00 € 0,00 €

9,78 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
HKG0003A
Spedizione gratuita? Clicca qui per saperne di più!
Alluminio Gyro Mount Aggiornamento Trex 550

Si tratta di un giroscopio di alta qualità in alluminio mount aggiornamento per il Trex 550.

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

luca.pax | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 11, 2013

ciao



pezzo di alluminio da montare nella parte frontale dell'elicottero



originariamente in quel punto sui trex c' montata una barretta di metallo



utile soprattutto per montare i servi pitch e ail



consigliata



fatta abbastanza bene



se potete lucidarla diventa bellissima



ciao ciao



luca



beenfly'n | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 12, 2013

Very nicely machined upgrade for the Trex 550. Very light, as it is cut away underneath. Would have been better if it was a little taller, so it was flush with the top of the frame, and left more room for the servo lead rubber protector.

evltoy | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 09, 2013

Quality of this plate is very good. It would aid in stiffing the frame and making life easy to not having to remove gyro from tape every time you take the boom box out. Also with this installed above boom box you have your gyro hidden away in a crash. I also installed one to replace the CF plate for the rx (under tail servo).



This part I got was from OMGheli. I found that I had to file my slots longer on the frame as the mounting holes on the plate are a little too close together.

fpn57 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Sep 04, 2012

Fits perfecrtly in front of the rotor mast, there is enough room for the servo wires and it looks cool. I have used it as a frame stiffner as I keep the Gyro to the rear of the rotor mast. The now no longer used brace it replaced I moved to the holes below the main drive gears to give extra stiffness there.

fpn57 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Sep 02, 2012

Good quality and value, have not fitted it as yet but should not be a problem, should give the frame extra stiffness which is not a bat thing with the 550e.

jockstrap | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jan 10, 2012

Received mine today - it actually does have that mark (scratch) on it as it's probably the path the cnc machine took and goes a little deeper/higher there.. it's very slight but shows up a lot in the photo..



You can barely feel it by finger so once gyro tape is down it will make no difference.. a pity seeing it's the only negative i can put on it for the price..



Seeing the servo wires point up on the 550 - there is little room between the servo and the mount so you need to bend the wires a lot - getting a strap under for the gyro would be hard..



I'm using it as a frame stiffner as the 550 frame is weak near the front 2 servos so this mount works well for me... and quite cheap compared to other brands..

Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!