Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Angelo 920 RC barche a vela 1840 millimetri (Plug and Sail)

Generating Links

Angelo 920 RC barche a vela 1840 millimetri (Plug and Sail)

Prezzo:

Now save risparmia 0,00 € 0,00 €

134,94 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
113000052-0
Spedizione gratuita? Clicca qui per saperne di più!

Prendere una pausa dalla norma, sedersi e dare RC barche a vela una prova. Non essere scambiato a pensare a vela sono lento e noioso. In una brezza tesa possono essere estremamente rapida e di eseguire rapidamente giri, dimostrando di essere molto eccitante. Dipartimento Funzione Pubblica si l'Angelo 920, porta il modo perfetto per entrare nel mondo della vela RC.

La barca a vela Angelo 920 viene plug and vela pronto. Basta installare il proprio 2-canale radio di superficie, l'assemblaggio finale completa e via! Modellato oceaniche yacht da regata, lo scafo della angelo è modellato composito in fibra di vetro con un gelcoat perfetta e vibrante smalto verniciato. Sostenere la randa colorati stampati in nylon rip-stop è un albero principale in alluminio robusto. Tutti gli elementi necessari sono installati, tra cui randa verricello, servosterzo, sartiame, la vela e l'hardware. Protezione dei costosi dispositivi elettronici è un portello resistente all'acqua, nascosto dietro una cabina passeggeri finto. Dressing up del modello sono alcuni dettagli scala come il volante e le rotaie della piattaforma.

La chiglia ponderata stabilizza l'Angelo, anche in una brezza rigida, ma lei andare avanti con vento leggero troppo. Se avete intenzione di navigare prevalentemente in forti venti, la chiglia ponderata ha una cavità vuota che permette di aggiungere zavorra aggiuntiva, se lo desidera.

Consente di testa al molo e vedere che cosa può fare. In un caldo pomeriggio d'estate non c'è niente come stare in relax con una bevanda fredda e sperimentare l'emozione della vela l'Angelo 920.

Caratteristiche:
• Plug and Sail - Installare la vostra scelta di ricevitore e la batteria
• scafo in vetroresina modellata
• Bella finitura lucida verniciata
• vele in nylon rip-stop Brillantemente stampati
• timone pre-installato e vela servi verricello
• Chiglia rimovibile
• Display basamento di legno incluso
• albero principale in alluminio

Specifiche:
Lunghezza: 920 millimetri
Altezza: 1840 millimetri
Larghezza: 200mm
Area delle vele: 0.40m2
Progetto dalla linea di galleggiamento al fondo della chiglia: 350 millimetri
Rig altezza dal ponte alla testa d'albero: 1.400 millimetri

richiesto:
2+ trasmettitore e il ricevitore Canale
4.8 ~ 6.0V batteria del ricevitore

  • Angel Sailboat
Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Toylander | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Apr 20, 2016

Excellent introduction into the world of sail boats, at a very reasonable price, just add your own receiver, an rx battery and ballast the bulb and you will be sailing in no time. It does what it says on the box. Given my first one, now bought a second one so we can have races.

Once you know what you are doing you can upgrade the rigging and fittings, the only mod i would make straight out of the box is the mast joiner, i made one from hard wood 150mm long to stop the wobble.
You will need about 1500 grams of the smallest lead shot you can get and some resin , i used acrylic with worked well but takes a long time to set.

Greg | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Mar 09, 2016

Having had this boat for a few months now, here are my comments. The hull is excellent, well moulded and stiff. The keel bulb can take about 1.4kg of lead shot which I kept in place by pouring epoxy into the bilb. The keel fin is very flimsy and bends sideways alarmingly when the ballast is attached. I made a new fin from Douglas fir sheathed in glass cloth - much stiffer. The joiner for the two piece mast is too short and gives no rigidity to the join. I replacd it with a 6" length of wood shaped to fit inside the mast. I replaced the rigging with wire and turnbuckles and replaced the rubbish spreaders with a single set of proper spreaders at half height plus a set of lower shrouds. I also replaced the mast crane with a longer one. With a decent rig, the boat sails pretty well. The winch has too much travel and I only need half the movement of my transmitter stick to go from fully in to fully out. I am thinking of making a new mainsail as the stock one does not set at all well. Overall, good value for money but it does need some fettling to get the best from this boat.

novembre | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Nov 10, 2014

First navigation, just great, virtually no wind but already good speed.
I put 1,550 Kgrs Lead in the torpedo, it's perfect

Brett | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Nov 03, 2014

Great new boat from the Shunbo Range, a good match for the Phantom. The wide beam and aft section of the hull gives it the most modern shape of the fleet, and longer nose section in relation to the Jib gives it more stability downwind. As with all the range several mods are required to make this a reliable craft, such as adding internal foam buoyancy (sinking prevention), waterproofing the 2 Servos, adding 1.6kg or more lead ballast. The plastic mast crane needs to be replaced with one that extends 80mm rearwards so the backstay clears the Mainsail. (see file section for photos). Optional mods include replacing the plastic chainplates with 3 position alloy ones. With a 3S 800mah LiPo and UBEC supplying power, I get 8hrs run time. Consider getting a spare Monsoon Mast and Sailset to run as a smaller "B" rig in heavier (12 knots) conditions. See Shipshape RC for lots more information.

pilotoheavy | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jul 31, 2014

va arribar amb la cabina i tapa dels servos trencada. d'origen i no per el transport. construccio fora matusera

David | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jul 26, 2014

just set this boat up (07/24/2014). this is my first and must say It is very nice boat, so nice it may never see water only cause it is a very impressive piece to look at.

mxhead692 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jun 09, 2014

Boat comes well packaged and looks great, however, there was supposed to be a plug in a small hole in the stern (my cousin also bought one, his has the plug in it!), I didn't notice the hole, boat filled about halfway with water when I tested the boat in a swimming pool for about 15 minutes, and now the winch servo is TOAST! Servo has an O-ring so it's SUPPOSED to be waterproof, or at least water resistant, but it's not! Only replacements are in 'international' warehouse so shipping cost would negate any savings over a $50 Hitech servo. Not a happy sailer here Hobby King!!!

bill987 | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 03, 2014

Bien emball. Tout simplement superbe navigue trs bien mme par gros temps

File dei clienti
No File Name Download [42]
No File Name Download [100]
No File Name Download [54]
Manual Download [18]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!