AQ-600 in fibra di carbonio Quadcopter 550 millimetri telaio

• Overall
• Quality
• Value

Certified Buyer Rated

May 06, 2016

ottimo telaio molto leggero supporta bene le torsioni, ben construito consigliato!

• Overall
• Quality
• Value

Customer Rated

Mar 06, 2016

Really nice frame kit. Used parts from a tired SK450, added a DJI Naza-m Lite, 5200ma 4S Lipo and gemfan 9x4.5s props. Onboard I have a Mobius w/ 2 axis gimbal that weighs in at 212 grams. All up flying weight is 1570grams. I'm getting 15 minutes of flight time. Really satisfied with the setup.

• Overall
• Quality
• Value

Certified Buyer Rated

Dec 27, 2014

Frame is prebuilt and Looks Good. The Landing gear is the cheap version of hobby kings cheap landing gear,Mir you know what I mean. :)



Not that the arms are aluminum, not carbon, which is a bit disappointing.



Still a nice frame.

• Overall
• Quality
• Value

Customer Rated

Nov 20, 2014

Very light, great quadcopter frame. I fit Afro Slim 20Amp ESC inside booms (inner boom diameter is 13mm, outer 14mm). Build quality is good in addition to the landing skids that are too springy. I'm using that frame with Naza Lite, Afro Slim 20Amp ESC's, Multistar 4225-390Kv 12Pole Motors (the green ones) and 15 x 5.5 props (with standard booms). My only regret is that the arms are not 5-10cm longer (for 17" props).

• Overall
• Quality
• Value

Certified Buyer Rated

Jun 19, 2014

ridiculously light for its size, building with NTM 2830-750kv, afro 30amp esc, kk2.1 HC, 12x6 3-blade prop, 5000mah 4s 20c. if anyone has any suggestions I am looking for a way to mount my 2-axis go-pro gimbal

• Overall
• Quality
• Value

Customer Rated

Feb 16, 2014

WARNING this is a very nice quad frame, but the motor mount has changed from the original version to that in the photo's. The motor's in the related parts are the wrong ones, you need to order them with short shafts.

• Overall
• Quality
• Value

Customer Rated

Oct 03, 2013

First of all it is a Good Frame , but ! I got some problems with the Yaw movements even with SimonK ESC. The Motors are not exactly in Position. So the distance between the Motor middle is not the same. Different between 1 cm and thats the Problem of that Frame and the feature that you can fold the Arms.It seems like this option is make the problems.

Overall the Frame is very Solid !. There are some problems with the Screws so you should replace the screws.

• Overall
• Quality
• Value

Customer Rated

Jan 26, 2013

Does not come as advertised. Bought one of these frames a few months ago and it worked nice. So decided to buy two more one for me and one for a friend. The new ones do not come with the same parts. They are missing motor plates and not not as strong. I would not recommend buying this frame now as it does not come as it is advertised.
I wrote to hobby king about the missing parts. They asked for photos. I sent photos. Was asked for more photos. Then made photos of the web hobby king web site, the instructions, and the box to show the miss motor plates. 3 weeks later and hobby king seems to have no interest in sending the parts. Now i have two frames that are not useable to me. Very disappointing purchase i made!

• Overall
• Quality
• Value

Customer Rated

Dec 22, 2012

PURCHASED THE AQ-600 FROM THE UK WAREHOUSE, CAME NEXT DAY, IM INPRESSED WITH THE FRAME SO FAR, ALSO BROUGHT ALL THE ELECTRICS AT THE SAME TIME, THIS IS HOW I SET IT UP, ALL HOBBYKING PARTS TO INCLUEDED, AQ-600 FRAME, 4 X TURNIGY 2830/1100KV MOTORS (WITH CUT OFF SHAFTS AND BOLT ON PROP ADAPTORS), 4X HK F-30A 3UBEC, MULTIWII 328P FLIGHT CONTROLLER (ALL READY LOADED WITH X 2.1 FIRMWARE), TURNIGY 10X4.5 PROPS 2CW 2 CCW, 6 CHANNEL ORANGE RX, TURNIGY 2200MAH 3CELL LIPO, MALE TO MALE LEADS, TOOK ME AROUND AN HOUR OR SO TO BUILD IT AND SET IT UP, BUT ALL IN ALL IT FLYS REALLY WELL, AND ALL IT COST WAS 135 GBP OR $218.31 USD, I HAVE UPLOADED SOME PHOTOS UNDER THE FILE TABS, AND WILL BUT PUTTING A VIDEO ON SOON, ANY QUESTION PLEASE ASK,

• Overall
• Quality
• Value

Customer Rated

Dec 04, 2012

So ein toller quadcopter, Motor Halterungen etwas schwach angegebene Motorisierung bis 35 bisschen bertrieben 28 Motoren tuen es auch und nen 3S lipo 3300-5000mah leider wenig Zubehr und Mann muss unbedingt alle schrauben mit schrauben Sicherung versehen also wenn er kommt erst mal Komplett zerlegen und neu aufbauen.