Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Armattan FPV Morphite X155 Telaio

Generating Links

Armattan FPV Morphite X155 Telaio

Prezzo:

Now save risparmia 30,22 € 30,22 €

Special Price 27,93 € 27,93 €

You save risparmia 30,22 € 30,22 €

Was  58,15 €

Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
771000001-0
Spedizione gratuita? Clicca qui per saperne di più!

L'FPV Morphite è un vero quad unibody X realizzato in fibra di carbonio da 3mm e ha un passo di 155mm. È estremamente leggero e pesa solo 56g, il che lo rende un volatore molto veloce e agile. Questo quad viene fornito con un POD MRP progettato da Florent. Questo POD è progettato specificamente per ospitare la tua fotocamera FPV e il trasmettitore video. Vengono forniti anche i LED delle luci posteriori in modo che tutti possano vedere dove sei stato.


Si consiglia di utilizzare motori 1306~1806-3100+kv con ESC da 20A e alimentazione fornita da una batteria LiPo 3S. Le eliche dovrebbero essere fino a 4” (4050) CW e CCW.


Ci dovrebbero essere ore di divertimento con questo drone poiché il telaio dovrebbe essere quasi indistruttibile in quanto viene fornito con una garanzia a vita del produttore sulla cellula.


Caratteristiche:
• Estremamente leggero (56g)
• POD MRP per telecamera FPV e TX video
• Piastra principale in fibra di carbonio da 3mm con garanzia a vita (dal produttore)
• Dimensioni dell'elica fino a 4” o 4045


Specifiche:
Interasse: 155mm
Peso: 56g (solo telaio)
Spessore piastra principale: fibra di carbonio da 3mm
Spessore piastra superiore: fibra di carbonio da 2mm


Incluso:
1 kit telaio Armattan X155
1 x scheda LED
1 x cinturino per batteria
1 x XT60
1 x adesivo


Necessario:
1 x controllore di volo
4 x 20A ESC
4 x 1306~1806 Motori 3100+Kv
Eliche 4 x 4””
1 regolatore da 5V
1 batteria LiPo da 11.1V 3S
1 x 5~6 canali TX/RX
1 x Fotocamera FPV e Video TX (e ricevitore/occhiali)

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

razvan | Acquirente verificato

  • Overall
  • Quality
  • Value

Small frame

Mar 23, 2018

So just received, first impression very nice is visible that is a good product.
Do not iclude anymore the PDB without 12v and 5v is no sense.
For a clean build i recommend 4in1 esc.
I will com with new updates after flight

povlhp | Acquirente verificato

  • Overall
  • Quality
  • Value

OK but not perfect

Nov 10, 2017

Using this frame for a 3" build with a little extra space. 248g without VTX/Cam but with 850mAh, 3S Graphene and DYS 1306-4000KV.
Bought it for the name and warranty.
It is made for 2 PCBs only, and you can't really substitute plastic spacers, as they would break in case of crash. So you need aluminium spacers and longer screws. FPV cage will not fit with my spare screws with slightly higher heads. With included parts I could not fit an RX in the stack with my 20A 4in1 w/ BEC and my F4 FC. So used longer spacers in the middle.
There are holes for pillars to hold a larger FPV tower, so they open up an extra option.
OK as a standard frame, but with the video stack it looks vulnerable. I will make/print a frame to hold my battery and cover the screw heads below. If you use velcro on battery+quad, there is less risk of screw heads damaging battery.

Stéphane | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Sep 11, 2016

TOTALLY USELESS: don't buy this!

Is there an engineer at Armattan? I doubt it... Motors holes are 2.3mm wide, as all serious motors (even in small sizes) have 3mm screws (quite standard). The 4 screws retaining the PDB and FC protrude outside the frame (not sunken heads, cylinders instead) so you can be sure you will damage your battery in case of hard landing. The PDB doesn't contain any BEC (5V and 12V, or AT LEAST 5v), so please buy one separate and try to insert it somewhere in such a small frame. The "FPV Pod" is also a joke, not compatible with ANY standard camera or ANY standard 5.8 GHz TX.

jockstrap | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

May 07, 2016

Awesome little frame...

Built mine with naze32, littlebee 20A, DYS 1806-2700kv, 4in blades, 4S - is a little rocket :)

Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!

Accessori