New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Basher BSR BZ-222 1/10 2WD Buggy corsa (Kit)

Basher BSR BZ-222 1/10 2WD Buggy corsa (Kit)

Discontinued Product

Please continue searching for a similar product.
SKU:
9249000749-0
WANT FREE SHIPPING? Click here to find out more!

Colpire la strada sterrata non è mai stato così facile con il nuovo 1/10 Basher BSR BZ-222 che corre carrozzino!
Disponibile in 3 versioni differenti; Ready per funzionare (RTR), quasi pronto per funzionare (ARR), e un telaio a rulli (Kit) senza l'elettronica, abbiamo qualcosa per tutti!

Il telaio BZ-222 può essere configurato per la metà, o layout motore posteriore a seconda delle preferenze o delle condizioni della pista. Una frizione antisaltellamento regolabile significa che è possibile comporre in modo efficiente l'energia per una trazione ottimale. Un rigido telaio in lega di 3 millimetri può prendere una battitura e tornare per pochi secondi. Come tutti i passeggini da corsa, la sospensione del BZ-222 è completamente regolabile per la convergenza, campanatura, e la posizione di shock. Parlando di shock, il BZ-222 è dotato di ammortizzatori in lega pieni come dotazione standard. Il corpo in lega filettato ha un collare regolabile che consente di sintonizzarsi tuo precarico molla alla perfezione.

Il vassoio della batteria linea centrale si adatta alla maggior parte degli batterie dura caso LiPoly e lascia ancora molto spazio per tutti i vostri altri dispositivi elettronici. Con i distanziali destra, il telaio sarà nemmeno accettare pacchi gara "Shorty". C'è un risparmiatore servosterzo incluso come parte del kit standard ed aggiungendo alla durata è il sistema di trasmissione a cinghia unico che corre tra il pignone e il differenziale. La cintura aggiunge una piccola quantità di danno al sistema, che aiuta a ridurre shock per i vostri ingranaggi e del motore.

Con pneumatici ad alte prestazioni in stile pin di gara e inserti in schiuma pre-montati alle ruote stile piatto, A completare il pacchetto è un multi-colore, corpo in plastica prestampata.

Mostra gli altri come si fa a vostra pista con la Basher BSR BZ-222 buggy scala 1/10!

Caratteristiche:
• 2WD con riduttore trasmissione a cinghia unica
• Può essere convertito in un layout case mid-motore
• ammortizzatori regolabili in alluminio
• Telaio completamente regolabile per la precisione set-up
• sfera completa cuscinetto motopropulsore supportato
• Pneumatici Buggy Racing pre-incollati ad alte prestazioni
• regolabile antisaltellamento a doppia frizione lato
• albero di trasmissione CVD

Specifiche:
Lunghezza: 395 millimetri
Larghezza: 251 millimetri
Altezza (con ala posteriore): 128mm
Passo: 289 millimetri
Altezza dal suolo: 28,3 millimetri
Vano batterie: 138 millimetri x 49mm x 25mm dimensione massima

richiesto:
set autoradio 2ch
pacco 2S 7.4V LiPoly Standard / Shorty
Caricabatterie
Controllo elettronico della velocità
Motore elettrico
pignone
servosterzo
strumenti di costruzione

  • SKU 9249000749-0
  • Brand Basher
  • Capacità ( mAh ) -
  • Peso 2030.0000
  • Lunghezza 485.00
  • Packaging Width 150.00
  • Altezza 285.00
  • Basher BSR BZ-222 1/10 2WD Racing Buggy
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

received in good condition. I'm planning to tear this apart and use it for spares when needed for my rtr version.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

received in good condition. I'm planning to tear this apart and use it for spares when needed for my rtr version.

It's a very cheap 2wd buggy but looks quite nice. I'd recommend some fettling before you drive though. Mine is built in mid motor which needs some work with a dremel - the driveshaft and top link hit the gear cover before the car bottoms out. I've also found that the kit camber on the rear makes the driveshaft bind in the diff cup which could lead to a breakage - you'll need to reset camber in mid motor.

Alloy bulkheads are essential. I purchased 2 cars in the sale so that I had plenty of spares - hobbyking could do with restocking these more often.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It's a very cheap 2wd buggy but looks quite nice. I'd recommend some fettling before you drive though. Mine is built in mid motor which needs some work with a dremel - the driveshaft and top link hit the gear cover before the car bottoms out. I've also found that the kit camber on the rear makes the driveshaft bind in the diff cup which could lead to a breakage - you'll need to reset camber in mid motor.

Alloy bulkheads are essential. I purchased 2 cars in the sale so that I had plenty of spares - hobbyking could do with restocking these more often.

this is a great car alloy chassis mid or rear motor mount option very good quality very fast will take any motor you throw in it very pleased the price is amazing just an awesome piece of kit

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this is a great car alloy chassis mid or rear motor mount option very good quality very fast will take any motor you throw in it very pleased the price is amazing just an awesome piece of kit

Buggy is a great start to the club ive joined belt driven so better handling even the rear mounted motor as standard..
the buggy is much better previous videos i see the tyres have changed but they had to go as they were making the buggy go in some kind of weird handling.. so fitting schumacher Mini spikes front and rear yellow dots the buggy changed characteristics..
Spares and upgrades are brilliant ive ordered the spring kit front and back (2.49 a set)
also after some noise from the diff ive ordered the ball diff yet again a must upgrade (10) also carbon front and rear shock posts as the stock ones are going to snap..
also the pitch on the spur 32 had to go so a Team associated B4 87T 48p spur fitted straight on (4.50) so now the buggy is in the top 3 figure level..
Yes i would recommend this 5/5 Hobbywing

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Buggy is a great start to the club ive joined belt driven so better handling even the rear mounted motor as standard..
the buggy is much better previous videos i see the tyres have changed but they had to go as they were making the buggy go in some kind of weird handling.. so fitting schumacher Mini spikes front and rear yellow dots the buggy changed characteristics..
Spares and upgrades are brilliant ive ordered the spring kit front and back (2.49 a set)
also after some noise from the diff ive ordered the ball diff yet again a must upgrade (10) also carbon front and rear shock posts as the stock ones are going to snap..
also the pitch on the spur 32 had to go so a Team associated B4 87T 48p spur fitted straight on (4.50) so now the buggy is in the top 3 figure level..
Yes i would recommend this 5/5 Hobbywing

Realy impressed, threw electronics in and took it for a spin, trimmed it in and it was perfect, straight lines all the way. Really impressed, whoever setup the chambers toe and the things did a good job out of the box.
The quality far surpassed my expectations.

The tyres people said was bad but I can say for a budget car I have no complaints. The tyres are quite soft and probly shredd away in no time, but hey ho.

Gears are 64 spur 15 pinion in 32dp. giving a ratio of 8.53 which is right on the money for 10.5t motor I put in.

Really pleased

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Realy impressed, threw electronics in and took it for a spin, trimmed it in and it was perfect, straight lines all the way. Really impressed, whoever setup the chambers toe and the things did a good job out of the box.
The quality far surpassed my expectations.

The tyres people said was bad but I can say for a budget car I have no complaints. The tyres are quite soft and probly shredd away in no time, but hey ho.

Gears are 64 spur 15 pinion in 32dp. giving a ratio of 8.53 which is right on the money for 10.5t motor I put in.

Really pleased

bonjour.je dconseille l' achat de cette voiture car la courroie est trop fragile, la voiture est pas mal la base ,faut changer les pneus, l'angle des amortisseurs arrires.mais par contre un gros problme avec la courroie qui est trop fragile et qui a cass au bout de 3 packs .j ai demand une solution hobbyking , ils m'ont toujours pas rpondu(ils sen foute apparemment )

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

bonjour.je dconseille l' achat de cette voiture car la courroie est trop fragile, la voiture est pas mal la base ,faut changer les pneus, l'angle des amortisseurs arrires.mais par contre un gros problme avec la courroie qui est trop fragile et qui a cass au bout de 3 packs .j ai demand une solution hobbyking , ils m'ont toujours pas rpondu(ils sen foute apparemment )

Great value 2WD buggy! I'm running the midmotor setup. You have to modify the dustcover a bit and go to smaller spur gear to run midmotor. Running 87t 48pitch spur and 28t pinion with 17.5T motor. The belt drive is nice and I'm still running the original belt. Check the gearhousing for the belt not rubbing. I run the belttensioner just slightly tightened. I have also bought the BZ-444 on sale, but the 2WD is way more fun!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great value 2WD buggy! I'm running the midmotor setup. You have to modify the dustcover a bit and go to smaller spur gear to run midmotor. Running 87t 48pitch spur and 28t pinion with 17.5T motor. The belt drive is nice and I'm still running the original belt. Check the gearhousing for the belt not rubbing. I run the belttensioner just slightly tightened. I have also bought the BZ-444 on sale, but the 2WD is way more fun!

Waiting on this to arrive.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Waiting on this to arrive.

pretty good build overall, changed it to mid motor and found the drive shaft hits the spur cover, also found plastics a little brittle and broke very easy. i rolled the buggy over on a astro track and broke a shock tower and C hub

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

pretty good build overall, changed it to mid motor and found the drive shaft hits the spur cover, also found plastics a little brittle and broke very easy. i rolled the buggy over on a astro track and broke a shock tower and C hub

The belt transmission is a total fail. Destroyed the belt on the first run, even after careful adjustment before use. Wasn't even using a powerful motor, just an ezrun 3300kv on 2s. The rest of the car appears to be ok except for the wheels which are out of round, and the body shell is as brittle as glass.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The belt transmission is a total fail. Destroyed the belt on the first run, even after careful adjustment before use. Wasn't even using a powerful motor, just an ezrun 3300kv on 2s. The rest of the car appears to be ok except for the wheels which are out of round, and the body shell is as brittle as glass.

  1. 1
  2. 2
Customer files
PIC1 Download [630]
PIC2 Download [672]
BZ-222 kit manual Download [3584]
BZ222 Gear Ratio Chart Using 48P Pinion/ Download [102]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save