BMS-306 micro servo 0,8 kg / .11sec / 6.2gPeso: 6 grammi / 0,21 once
Dimensioni: 22 x 10 x 23 mm / 0,86 x 0,4 x 0,9 pollici
Coppia a 4.8V: 0,8 kg / cm, 12 oz / a
Velocità a 4.8V: 0.11 sec / 60 ° a vuoto
Velocità ( Sec / 60deg )
Coppia ( kg) ( min . 0.01kg )
Unit Weight (g):
A ( mm ):
B ( mm )
C ( mm )
D ( mm ):
E ( mm ):
( Mm ) F
Bought four, one had strange noise with a little jittering but all worked. Good centering and good resolution. They are really slow in cold weather compared to cheaper servos. Stripped one when landing my Reaktor. Can recommend for indoor or in warm climate, will try the HXT500 next...Nice looking servo! The problem is that it lasted 15 minutes (while I was setting the plane).
Today I was waiting for spot to take off, controls were working fine. A few minutes later when the spot was available I was ready to take off, checked controls again-no rudder!! I am using 5V BEC and servo was controlling a rudder on a 200g plane, everything moves freely.
Having in mind that this is my first servo failure of that nature in over thirty years, I should consider myself lucky!Je me sert de ces servos dans mon blaster 2...
Retour au neutre tip-top, costaud...!!!Works great. Same as Waypoint 60. But I bought aproximately 20pc till these days and 1pc was wrong with bad moving (non repairable) and 1pc was blocked inside box and it was easy to repair itExcellent servo. Pas la peine de se ruiner avec les EP6 de Donuts.
A 8.84$ pice (pour les membres Platinium'), c'est juste 2 fois moins cher. Foncez !Excellent cyclic servos for my gaui 200. Plenty fast with a low current draw and cool/cold to the touch after a 7+ minute flight on 3s 800-1000mah noob 3d/fast forward flight in idle up w/70-51-40-51-70 throttle curve.trs bon servo, idem au ep 6 utiliser par la plupart des comptiteurs f3p et f3k, le top !Compare to HXT500, this servo provies
-Longer potentiometer life
-a bit more $
-Slightly heaver side for 5oz ish foamy
Highly recommended, overall.sehr gutes und genaues servo!!!SERVO MUITO LEVE E ATENDE MUITO BEM PARA FUNO QUE APLIQUEI