Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

BMS-A206 MG Digital Mini Servo 3,2 kg / 0.05sec / 22,5 g

Generating Links

BMS-A206 MG Digital Mini Servo 3,2 kg / 0.05sec / 22,5 g

Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
122000004
Spedizione gratuita? Clicca qui per saperne di più!

BMS-A206 MG Digital Mini Servo 3,2 kg / 0.05sec / 22,5 g

di scelta eccellente per mini servo elicottero di coda.

Specifiche tecniche:
Peso: 22,5 g
Dimensioni: 23 x 12 x 27.25mm
Tensione di funzionamento: 4.8 ~ 6v
Coppia: 2.6kg / cm @ 4.8V, 3,2 kg / cm 6v
Velocità (sec / 60 °): 0,06 @ 4.8v, 0,05 @ 6v
Tipo motore: Giappone Coreless
Caso: Caso in lega di alluminio completa
Piombo / spina: JR Tipo

Doppio cuscinetto a sfera
Tutti gli ingranaggi metallici
Digitale a 12 bit Risoluzione (4096 punti)

  • Servo Coppia ( kg) ( min . 0.01kg ) 3.20
  • Servo Velocità ( Sec / 60deg ) 0.05
  • Servo A ( mm ) 31.00
  • Servo B ( mm ) 23.00
  • Servo C ( mm ) 27.00
  • Servo D ( mm ) 12.00
  • Servo E ( mm ) 33.00
  • Servo F ( MM ) 20.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Carica video

Registrati per caricare video, per favore accedi o registrati

Registrati per scrivere recensioni, per favore accedi o registrati

Ziggey | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Jun 17, 2013

Use these on my Align 250DFC's and very happy. They're fast and hold rock sold...highly recommend.

Sp1k3 | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

May 10, 2013

Amazing servo.
I'm using it for the roll on a ultra light gimbal, and gimbals require the highest requirements from servos. And this meets them all!!
Its fast, strong, and extremely smooth, centers perfectly.
The only issue I had was that the servo is directly connected to the bottom plate, which gives a ratio of 1:1 angle of camera to angle of servo. Since there is just a very little bit of free movement due to the metal gears, the gimbal was oscillating between the 2 lsbs of the 12 bit adc, causing a wobble in the video. So I had to dampen then movement by adding some soft foam between the movements, and now it works perfect.

Peter | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Apr 20, 2012

Hi there,



ordered this servo because of need for a super heli tail servo. As I noticed this one is the best quality servo I ever held in hands. No sloop, no shivering, stays cold, super fast and absolute precise. Best choice for perfectionists.

Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!