Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

BMS-A56V alta tensione Slim Ala (Metal Gear) 8.6kg / .12sec / 28.4g

Generating Links

BMS-A56V alta tensione Slim Ala (Metal Gear) 8.6kg / .12sec / 28.4g

Prezzo:

Now save risparmia 15,99 € 15,99 €

Special Price 40,79 € 40,79 €

You save risparmia 15,99 € 15,99 €

Was  56,78 €

Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
122000019-0
Spedizione gratuita? Clicca qui per saperne di più!

BMS-A56V alta tensione Slim Ala (Metal Gear) 8.6kg / .12sec / 28.4g

Grande per il tuo preferito alianti 1.5+ metri con le loro ali ultra sottile.

Caratteristiche:
• Doppio cuscinetto a sfere (Si-olio)
• 3 poli bushed motore valutato per alta tensione fino a 2S Lipoly
• case in lega completa per il miglior dissapation di calore
• Design del segnale digitale con il 100% quadrata raccordo PWS
• le misure automatiche ms centrali
• IC digitale (pacchetto di SOP con il trasferimento dei dati 12bits)
• Driver MOS-FET (driver animato in grado di spingere il potere 7A)

Specifiche:
Peso: 28.4g
Dimensioni: 30 x 10 x 34.5mm
Coppia a 7.4V: 8.6kg / cm
Velocità a 7.4V: 0.12 sec / 60 ° a vuoto
Tensione di funzionamento: 6.0 ~ 7.4V

* Nota:
Le dimensioni di seguito elencati nella tabella dei dati includono la linguetta di montaggio inferiore. Quella scheda aggiunge 6mm a qualsiasi dimensione in altezza.

  • Servo Coppia ( kg) ( min . 0.01kg ) 8.60
  • Servo Velocità ( Sec / 60deg ) 0.12
  • Servo A ( mm ) 45.00
  • Servo B ( mm ) 30.00
  • Servo C ( mm ) 41.00
  • Servo D ( mm ) 10.00
  • Servo E ( mm ) 42.00
  • Servo F ( MM ) 24.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

AndrewsBig | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Apr 25, 2016

On bench stres test works OK, but very noisy. When mounted to the wing (1.5m airplane) gets random flaperon in center or end position. I have two and same result. Interesting thing: Flaperon rapidly reduces when i use 6V BEC instead direct 2S Lipo..... Sorry but i cannot recommend it this servos.

stopher | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 14, 2016

Initial take is these are quiet and powerful.. made up a test rig to measure centering accuracy. All have come in at less than 1mm variance using a 250mm long arm. 2 of which i could see no visible variance at all. two others were at around .5 mm. I am using a mm scale so anything less than 1mm is estimated. The test was done with a turnigy servo tester and a 2 cell life pack.

Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!

Accessori