Caddx Turtle V2 HD FPV Camera (Black) w/HD DVR

The Caddx Turtle V2 is a mini HD FPV Camera that supports 1080p 60fps and comes with a built-in HDR. It is split into two sections with the camera and mount separate to the DVR board with 20x20mm mounting holes. This saves on having to mount another expensive camera for HD recording. This keeps the weight down to 12g.

The camera comes with a new Turbo Eye lens (1.8mm) with a FOV 155° for FPV and 170 ° for DVR recording and better sound recording. The camera supports both PAL and NTSC and comes with a 1/2.7" CMOS sensor. The DVR supports Micro SD cards (8~64GB and Class 10 or above) and records MP4 files. The system has been updated to provide better default image settings.

The Caddx Turtle V2 is an easy way to record all your FPV flights for easy playback later or upload to the web. The camera also provides excellent vision for your FPV flying.

Features:
• New Turbo Eye lens
• More reasonable PCB layout and 20x20mm mounting holes - no offset holes!
• microphone
• Default image setting improvements
• Up to 1080P @ 60fps
• Wide Input voltage range 4.5~20V DC
• Low power consumption, 380mA @ 5V / 160mA @ 12V
• Low weight approx. 12g
• HD DVR Micro SD cards (8~64GB) MP4 files

Specs:
Image sensor: 1 / 2.7" CMOS sensor
Level: 800TVL
TV system: NTSC / PAL, can be changed
Video resolution: 1080P @ 60fps / 1080P @ 30fps / 720 @ 60fps
Power input: DC 4.5-20V
FPV FOV: 155°
Recording FOV: 170 °
Mini lighting: 0.01LUX
Image resolution: 2 megapixels
Lens: 1.8mm Turbo Eye Lens
Working current: 380mA @ 5V / 160mA @ 12V (low power consumption)
OSD menu: Yes (support voltage display)
Video file: MP4
Audio: Support
Electronic shutter: PAL: 1 / 50-100,000 NTSC: 1 / 60-100, 100
Signal to noise ratio: > 60dB (AGC OFF)
Video output: CVBS
Max Micro SD card support: 8-64GB (Class 10 or above is required, Class 10 / UHS-I / UHS-II is recommended)
Net weight: approx. 12g

Included:
1 x Caddx Turtle V2 camera 
1 x 5D-OSD menu board 
1 x camera stand
1 x 30x30mm mounting bracket
1 x 4pin FPV silicon cable (expanded to 2-pin connector for OSD board and 3-pin connector for FPV)
1 x hex wrench
1 x manual
1 x Warranty Card 

Note: Full-size metal brackets shown in some photos are not currently included.