Carbon Fiber Style Starter Box 12v (1/10 e 1/8 Nitro Car)

• Overall
• Quality
• Value

불량제품

Dec 12, 2016

시동도 걸지 못하고, 모터 기어 일그러짐. ㅠㅠㅠ 완전 불량임.

• Overall
• Quality
• Value

Customer Rated

Jun 09, 2016

Excellent banc de démarrage, compact et léger.

Je l'utilise avec un Lipo 4s pour démarrer mon buggy 1/8 avec succès.

Il faut cependant bien fixer le moteur avant la première utilisation afin que la courroie ne glisse pas.

Les plots fournis avec le banc sont très efficaces et sont très simples à régler.

• Overall
• Quality
• Value

Customer Rated

May 08, 2016

this box is a piece of garbage i would not recommend buying this...it says 775 motor driving high torque..NOT EVEN CLOSE....you could even stop this with just your thumb alone...again dont waste your money on this make sure its a twin motor...then for sure thats a high torque

• Overall
• Quality
• Value

Customer Rated

Dec 27, 2015

Bought one to use with my sabertooth nitro, but doesn't work, don't reach the flywheel. Too options: cut the chassis to enlarge the hole to flywheel, or remove pull starter and motor support. So I continue to use my pull starter.
The plastic insert are very weak, I broke one just tightening a screw...

• Overall
• Quality
• Value

Customer Rated

May 04, 2015

not very happy with this product! tried to turn the rubber fly wheel and motor to set it for my nitros . broke 3 wires and cut my finger . just bad all around. i haven't even put power to it afraid it will not work .

• Overall
• Quality
• Value

Customer Rated

Jan 30, 2015

The wheel on mine was crooked, so its not parallel to the slot cut-out on the frame. Its was a noticeable offset of about 10 degrees which is very bad, so bad that it wants to move the car forward and then the wear on the wheel is worn out prematurely.

Im not sure how to fix this because the mounting holes are fixed and not adjustable, and the plastic piece holding the rubber wheel and motor cant be adjusted either because they use a belt to drive the wheel.

Not sure how long this will last, but I think a replacement wheel will be needed soon.

• Overall
• Quality
• Value

Customer Rated

Jan 09, 2015

The carbon starter box must replace the plastic pulley
by a metal or aluminum for more durability.
Thanks.

• Overall
• Quality
• Value

Certified Buyer Rated

Dec 24, 2014

Really only for 1/8th scale. Starter wheel is too wide to fit through narrow flywheel slot. I was unable to setup guide posts for a 1/10th touring car, distance from push switch to starter wheel is to great.

• Overall
• Quality
• Value

Customer Rated

Dec 05, 2014

poor quality . Motor spun by itself with no load on it and adjustment screw failed to work . However i managed to sort it out with washers on the starter deck to ensure it pops back up to correct position . Now works fine and yo get what you pay for

• Overall
• Quality
• Value

Customer Rated

Sep 15, 2014

Very difficult to change orientation of starting wheel, wires to motor broke while trying to change. Had to bend outer shell to remove motor/wheel assembly. If you need to change the starter wheel for different crankshaft maybe look at a different unit. Pretty disappointed and now have a useless box as motor terminals broke off trying to fix. couldn't really recommend this to anyone.