Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

CellPro 10s 260W 10A Balancer / Caricabatterie

Generating Links

CellPro 10s 260W 10A Balancer / Caricabatterie

Prezzo:

Now save risparmia 0,00 € 0,00 €

111,03 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
CP10S
Spedizione gratuita? Clicca qui per saperne di più!

I 10s CellPro supporta fino a tassi 10A max di carica e nuove tariffe Auto di carica veloce (1.0C, 2.0C, e 3.0C), i 10s è in grado di caricare in modo sicuro una o due batterie al litio fino a una velocità di carica 3C

Per i tipi di batteria: polimeri di litio (1s a 10s bilanciati), agli ioni di litio (1s a 10s bilanciati), litio manganese (1s a 10s bilanciati), A123 (LiFePO4) (1s a 10s bilanciati)

Capacità Confezione: 100 mAh a 65Ah (tempo di carica limitata a max 12 ore)
Tensione in ingresso: 10-16VDC, inversione di polarità protetta
Corrente di ingresso: 1A a 25A, Software Limited, regolabile dall'utente tramite il software PC
Conversione di potenza: DC converter / DC, 62,5 kHz, 80% al 90% dell'efficienza seconda corrente di uscita
Tensione nominale in uscita: 3.60, 4.10, e 4.20 volt per cella; massima 42V
Uscita di carica della batteria: 100mA gamma regolabile a 10A, o 100mA a 4A (nodo solo la carica), limitata dalla corrente di ingresso 25A *
Continuo potenza di uscita massima: 180W @ + ingresso 12VDC, 260W @ + ingresso 15.7VDC
Taratura di tensione: le misure di tensione cellulare sono calibrati per un tracciabile standard NIST fabbrica; calibrazione è a +/- 6 mV
Calibrazione corrente: corrente di carica è calibrato su uno standard 4A fabbrica; calibrazione è a +/- 1 mA

Precisione di misura:
Risoluzione di tensione: 0.1mV
Tolleranza di tensione: +/- 6mV
Corrente di carica: +/- 1%
Capacità aggiunto al pacchetto: +/- 1%
Capacità per cento ( "Fuel"): +/- 20%

Uscita dati seriali: 19,2 kbps, 8 bit, 1 bit di start, 1 bit di stop, nessuna parità
L'integrità dei dati: checksum, CRC
Ventole di raffreddamento: singole, 8 CFM, 40 mm di diametro
Dissipatore: case in alluminio, alettato
Connettore della batteria in uscita: "CellPro" compatibili, 2 serie x JST PA, 6 posizioni
LCD: 2 linee, 16 caratteri, grigio chiaro / blu retroilluminato

NOTA: Bilanciamento schede sono vendute sepperatly. Si prega di vedere i prodotti correlati. Due schede di collegamento per la vostra marca di batteria saranno necessari per 10s di ricarica.
Si tratta di una Caricabatteria. Non una unità ristrutturato.

* Corrente caricatore disponibile può essere limitata per determinati tipi di batteria a seconda del numero di celle di carico in serie e anche dalla temperatura ambiente e interna del caricatore durante il funzionamento

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

startazz | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jun 03, 2012

5 out 5 all day long for the cellpro 10s HK,i've had the smaller cellpro 4s gold for a good few years now so i needed a bigger charger that could charge a bigger cell count,plus i wanted to charge lipo batteries in parallel so with the two ports i can charge multiple batteries at once now,with a couple of parallel charging boards i'm well and truly sorted,just remember that you will need a good PSU (power supply unit) that can handle the 260watts with a least 20amps.

I've also got and had other charges over the years but nothing IMO can come close to the Cellpro charges,i'd like to see HK selling the cellpro powerlabs 6 & powerlab 8 if possible because i know i'd buy one of those if the price was right too,revolectrix wants to much for shipping and HK can even cell there cellpro 10s cheaper than they can. ;-)

ken | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jan 29, 2012

Hobby king Ya just gotta do better then this. You say to look in the " related products" to get the balance board for this thing. I WANT to buy one but I'm NOT going to because I cannot find the balance board anywhere. There is NO related produces under the products tab. I need a charger that can balance 8s. This can do it but you don't make it easy to find the balance board I wonder how many other sales your losing because of this. Please make it easier for us to give you some money K? please? and thank you :)

spawny | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 05, 2012

Great Charger! Especially for Lipos with older cells or bad cell matching! The cellpro 10s and all other fma products balance faster than all other brands. I have a Junsi 1010plus too, but the cellpro is much faster. And the option for loading over balance ports only is great! I use this very often! The only negativ thing i can say is that this charger is only for charging Lipo, LiFe and LiIon with no opions for discharging

pizzaschnitzer | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Dec 10, 2011

best liPo charger available.
no possibility to overload your batteries.
up to 313watts of charging power,
up to 2x 5s lipo batterys.
faster than any other charger,
charges if needed with up to 4Amps over Balancer Wire standalone
LiPo, LiFe, LiIon possible, nothing else!
Bought it almost two years ago from england for 200 Euro! if you can, buy it NOW!

Pizzaschnitzer | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Dec 14, 2010

Hello Guys!

This Revolectrix Charger is the best Charger for Lipo or LiIon Life Batteries available at the market.
no one other is as accurate as it,
no one ist faster
and im using it now for more than one year.

i bought it for 200 Euro > now for 126US$ / 119$

i think you will not make anything wrong with the cellpro 10S

customer | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Dec 08, 2010

This FMA Cellpro 10s has the most powerful Balancer of all the chargers I know. It's an absolute must, at HK it's have price. You need also a power supply of at least 20 Amps to make things complete. Best Buy.

XXXX | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Dec 08, 2010

un anno e mezzo che lo uso...acquistato da altro negozio...
veramente ben fatto...
facile da usare...(in automatico)
versatile...
molto veloce nella carica...(in automatico)
gestibile da PC...
fatte le prime impostazione di base (una volta solo)si arrangia tutto lui...
non serve impostare ne voltaggio,amperaggio e altri valori vari...tutto automatico...
colleghi la lipo,premi il pulsante e basta....

penso proprio di acquistarne un'altro....il mio pagato molto di pi...

OK 100

walter | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Dec 06, 2010

Type your review here.

Try to include as much data as possible.

excellent charger - I started with a 4S, and now have moved to the 10S as I started to use larger Lipo packs. A 5000 mah 6S Lipo charge time approx., 35 minutes. This FMA charger pays for itself by protecting your lipo's, and extending their life with safety features built in.

_shadow_ | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Dec 04, 2010

I exclusively use FMA chargers for lipos, the Cellpro 10s has been serving me without any glitch since I purchased it. Hobbcity now just makes it a lot cheaper! I am tempted to get another one.

Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!