Edge 540 è l'aereo più comunemente usato nella serie Red Bull Air Race ed è un eccezionale aerei acrobatici che ha vinto diverse competizioni acrobatiche illimitate da metà degli anni 1990, con le sue linee pulite ed aggressive, non c'è da meravigliarsi che è così popolare come un modello.
Questo bordo 540 non solo è stupefacente, la qualità costruttiva è semplicemente stupenda, un leggero ma forte della struttura del velivolo assicura precisa capacità acrobatiche e con la scelta del motore di destra, le prestazioni in verticale senza limiti. L'hardware è di alta qualità e le caratteristiche pesanti corna duty e barre di controllo, tirare / pull timone, serrature servo di piombo, le estensioni servo corno e così via. Il principale tubo ala e carrello di atterraggio sono in fibra di carbonio e il rivestimento è di prim'ordine.
Si tratta di un valore straordinario per il piano di denaro gas 3D che darà prestazioni sorprendenti quando alimentato da un motore a gas 30cc o Turnigy Rotomax equivalente Outrunner Brushless, ma è anche un modello acrobatico bella scala, che a causa del suo basso PMU può essere alimentato da un motore 26cc e offrono ancora grandi prestazioni flying sport, in entrambi i casi, questa è una delle più belle Edge 540 modelli di questa classe è possibile acquistare!
Apertura alare: 1.800 millimetri
Lunghezza: 1.680 millimetri
Peso di volo: 3800g
La tua 6 canali TX / RX
6 x High Torque Servo MG Digital
30cc motore a gas (3D) ~ motore 26cc Gas (Sport)
75 millimetri Spinner
UBEC / Regolatore
Arrived yesterday. Seems well made with actual glue on the joints (unlike some ARTFs) and what appars to be a reasonably sturdy landing gear platform. Time will tell on that one as the strip I fly from is bumpy.
The model itself is covered ok, but you'll need to run the covering iron over it in a few places to get the wrinkles out. Comes with a nice, stiff carbon landing gear and a carbon wing tube that is an excellent fit. The manual is on a mini-CD and is about as much use as any other Chinglish manual. It instructs you to use a joiner rod (supplied) for the elevators and a single servo but then supply the fittings for twin servos. Since the hole is present in the iarframe for them I've used twin servos as it's always my preference for safety/redundancy. Stickers are an absolute b*****d, and pretty poor quality, but the overall effect is good once they're applied. Four stars only because of this. If you're wondering what the two star shaped bits of wood in the pictures are, they are mounting templates for a DLE30 and an MLD28 motor. This model is VERY lightly build aft of the wings, which will make it good for 3D but I'll be adding some reinforcement and weight to it as I prefer scale.Arrived in good shaped doubble box. The covering is nice but needs some ironing. The hardware is a bit heavy in my opinnion but strong enough for any use. The manual comes on a small format CD, pretty simple but no need at all. Assembling is easy, no questions. Wooden parts are extremely nice, no need to modify at all. -1 crown due to unreal AUW.
fuselage with canopy 820g
horizontal stab 140g
carbon spar connector 50g
carbon landing gear 100g
wheel pants 70g
glass fiber motor cover 170g
metal parts 220g
doing the math...
6 servos 250g
onboard power, receiver 250g
3800g auw is kinda impossible with 30cc.
...planning electric conversion here, 500g Hacker A50 with 9 cells 3300mah Lipo, chain is about 1500g. AUW 4500g.
...to be continuedFinal report - Love this plane, flys slow and precise. CG is about 138mm back which when inverted still flys level. Landing this plane is a dream; but must run a 20 x 8 prop.Back again to let those who want to know how it flew. I had CG point at 145mm and it seemed to fly OK untill i went inverted. When inverted it just wanted to climb, meaning that my tail is still heavy. Will come forward another 5mm. Plane flys very forgiving and light feeling; combined with plenty of power it does what its asked.Have built the plane and have had its maiden; still in one piece. I went electric using 299kv Hyperion on 8s 4000mha. I used two servo's for the elevator and located rudder servo up in the fuselage. I had CG 5mm further back to the recommended and it flew "VerY" tail heavy. Have put my CG point now 10mm forward from recommended now (140mm back from leading wing edge) and yet to try. As they say better nose heavy better than tail heavy; I'm lucky that get to have a second go. I think that because the plane just floated so easy and responded so well i had success to land it in one piece. Really looking forward to flying it when i have CG right.All in the box looks good BUT this is my first large gasser plane and there are no instructions. Would HK be kind enough to put an instruction file in the files tab. Then after i get to build the plane & test it would i give a better review. Also I have been buying from HK for over two years and they are seriously slipping on delivery; especially when you pay for express postage. Sydney to Cairns - 13 days. HK have got great products and people will always buy; put a bit of extra effort in delivery.