Controllo corni 13.5x16mm

• Overall
• Quality
• Value

Customer Rated

Dec 22, 2008

Little control horns for Show- and Parkflyers,

good quality and very cheap.

• Overall
• Quality
• Value

Customer Rated

Oct 31, 2008

This is a excelent horn. I used this horn in the elevons of a Zagi, it is very reliable!!!

• Overall
• Quality
• Value

Customer Rated

Oct 01, 2008

I have been using these control horn on all my 8 scratchbuilt foam. What I did was to place a layer of tape on both top and bottom side if the control surface and then place the control horn on the tape. This will reduce the problem where the foam compress and the horn becomes lose.

• Overall
• Quality
• Value

good quality horn

Nov 14, 2007

Good quality horn, very reliable.

• Overall
• Quality
• Value

good quality horn

Nov 14, 2007

Good quality horn, very reliable.

• Overall
• Quality
• Value

Control Horns 13.5x16mm

Nov 14, 2007

I am very pleased with these. They can be attached with either 2mm bolts or No2 self tapping screws. The clevis holes fit standard 1/16" metal clevises. I glued in a short section of K&S 1/16" brass tube to give a perfect fit with 1mm (0.039") wire. The holes are at 5, 9.5 and 14mm from the control surface. The end of the mounting shoe is just under 15mm from the line of the clevis holes.

Mike

• Overall
• Quality
• Value

Same as DuBro!

Nov 14, 2007

Seem to be the same as DuBro's micro control horns... work great!

• Overall
• Quality
• Value

Control Horns

Nov 14, 2007

These ones are similar to Dubro Micro horns. Very strong yet light weight. I am using it on my EPP planes.

• Overall
• Quality
• Value

the cheapest control horn

Nov 14, 2007

This is a really funtional control horn. You should find the screws for this horn.

• Overall
• Quality
• Value

Nice horns

Nov 14, 2007

Only problem for me, is that i have to find suitable screws for those nice control horns