Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

7.0kg Corona 538MG Digital Metal Gear Servo / 0.13sec / 53g

Generating Links

7.0kg Corona 538MG Digital Metal Gear Servo / 0.13sec / 53g

Prezzo:

Now save risparmia 0,00 € 0,00 €

9,50 €
Quantità:
Spedito da:
  • USA
  • Global
  • EU
Già acquistato
Ora di arrivo prevista: Nessun Orario Di Arrivo Previsto [ ? ]
Stato:
Ordine arretrato
SKU:
DS538MG
Spedizione gratuita? Clicca qui per saperne di più!
7.0kg Corona 538MG Digital Metal Gear Servo / 0.13sec / 53g
Modello: DS538MG
Tensione di funzionamento: 4.8V / 6.0V
Corrente di funzionamento: 300mA / 400mA
Velocità di funzionamento: 0.14sec.60º / 0.13sec.60º
Coppia di stallo: 6.5kg.cm / 7kg.cm
Dimensioni: 20x40x38.5mm (0.78 x1.51 "x1.57" ")
Peso: 53g
Banda morta: ≤3uSec
Viaggio di funzionamento: 40 ° / un impulso lato 400us viaggiare
Potenziometro: 5 cursore / Unità indiretta
Cuscinetto a sfera: MR106
Equipaggiamento: metallo
Filo Connettore: 215 millimetri
Temperatura di esercizio: -20 a + J 60J
  • Servo Coppia ( kg) ( min . 0.01kg ) 7.00
  • Servo Velocità ( Sec / 60deg ) 0.13
  • Servo A ( mm ) 44.00
  • Servo B ( mm ) 40.00
  • Servo C ( mm ) 41.00
  • Servo D ( mm ) 20.00
  • Servo E ( mm ) 53.00
  • Servo F ( MM ) 27.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Heliwingo | Acquirente verificato

  • Overall
  • Quality
  • Value

Geht so....

Jan 09, 2022

Großes Spiel in dem Getriebe....
Rückstellgenauigkeit lässt zu wünschen übrig....
Ware Könnte besser sein.....

Bart | Acquirente verificato

  • Overall
  • Quality
  • Value

Good servo

Dec 20, 2021

Works well on my old nitro car

Antonio | Acquirente verificato

  • Overall
  • Quality
  • Value

Low price but doubts about quality and functioning.

Sep 19, 2021

I bought this servo for a 1/10 rc car but I am not satisfied.
Power and speed are as in the description but when it rotates slowly it shakes and after a few minutes of light use it warms up slightly.
I have at least 10 servos from 4 different brands that are more and less powerful or faster than this one but none of them shake or get hot after a few minutes.
Maybe it is faulty? Maybe it is not suitable for my receiver (Flysky FGr4S)? I don't know.

Bob | Acquirente verificato

  • Overall
  • Quality
  • Value

Good product at a very reasonable price.

May 14, 2021

I bought these to put in a Mick Reeves Gangster Lite as I wanted digital servos without paying the earth for them. I found these on the HK website and having used Corona rc products previously, decided to buy. These are well made powerful units with metal gearing and metal casing. Ideal for my purpose and fairly quiet in operation. Very pleased.

Dietsch | Acquirente verificato

  • Overall
  • Quality
  • Value

Good Quality Standard Size Servo

May 10, 2021

It does what it should. Never had an issue with it

Malik | Acquirente verificato

  • Overall
  • Quality
  • Value

Top

Apr 25, 2021

Rien à ajouter ils font le job

TJ | Acquirente verificato

  • Overall
  • Quality
  • Value

Quality of fittings provided leave doubts about reliabilty

Dec 29, 2020

1. The DS-538MG servos all appear to work OK. However, I have yet to use them in flight, so a comment about reliability would be premature. Control arms. Oh, that should not be plural. The single and solitary control arm supplied does not appear to be adequately strong enough or big enough for a 7kg servo, so I have resorted to more robust arms from my box of bits. Mounting hardware was totally inadequate and appears to have been sourced from Dubro's “Small Servo Mounting Hardware kit”, The brass ferrules only go half way through the mounting rubbers – this means that the puny little screws cannot be tightened properly, as all they do is squash the rubber vibration absorbers. The mounting screws are disturbingly small and unsuited to anchoring such a powerful servo. and were discarded. This meant another dive into the bits box was required, looking for more manly servo mounting screws.. What happened to the notion of providing “fit for purpose” control arms and mounting hardware like in the old days? This is all quite disappointing. I hope that the same penny pinching attitude does not apply to the insides of the servo itself as the longevity of my new 11kg aircraft is at stake. I may have made a bad call buying these servos.
2. The box: Purportedly shows views of the DS-538MG 7kg servo actual size. Not true. The diagrams are about 75% full size. But there's more; The box lid picture, a plan view of the servo, shows 2 mounting screws. Wrong. There are 4 mounting screws. Oh dear.

Peter | Acquirente verificato

  • Overall
  • Quality
  • Value

Good servo. Bad service

Jul 28, 2020

I bought five of these for a new model. Four seem very good - fast and powerful. One didn't work so I asked for a replacement. I am still waiting after several months. There is a delivery charge shown against the order, which I don't understand.

| Acquirente verificato

  • Overall
  • Quality
  • Value

Jun 08, 2020

shlomi | Acquirente verificato

  • Overall
  • Quality
  • Value

a

Mar 05, 2020

aaa

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
File dei clienti
Quality Box Download [1545]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!