New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Corona 939MG Digital Metal Gear servo 2,7 kg / 0.13sec / 12.5g

Corona 939MG Digital Metal Gear servo 2,7 kg / 0.13sec / 12.5g

Shipped From:
  • USA
  • Global
QTY:

Now save risparmia 0,00 € 0,00 €

5,84 €
Stato:
Disponibile
Peso:
31 g
SKU:
DS939MG
WANT FREE SHIPPING? Click here to find out more!
Corona 939MG Digital Metal Gear servo 2,7 kg / 0.13sec / 12.5g
Modello: DS939MG
Tensione di funzionamento: 4.8V / 6.0V
Corrente di funzionamento: 200mA / 240mA
Velocità di funzionamento: 0.14sec.60º / 0.13sec.60º
Coppia di stallo: 2.5kg.cm / 2.7kg.cm
Dimensioni: 22.5X11.5X24.6mm (0.88 x0.96 "x0.45" ")
Peso: 12.5g
Banda morta: ≤3uSec
Viaggio di funzionamento: 40 ° / un impulso lato 400us viaggiare
Potenziometro: 2 cursore / Direct Drive
Cuscinetto a sfere: MR85
Equipaggiamento: metallo
Filo Connettore: 215 millimetri
Range di temperatura: -20J + 60J
  • SKU DS939MG
  • Brand Corona
  • Peso (g) 31.00
  • Lunghezza 64.00
  • Larghezza 31.00
  • Altezza 45.00
  • Coppia ( kg) ( min . 0.01kg ) 2.70
  • Velocità ( Sec / 60deg ) 0.13
  • A ( mm ) 32.00
  • B ( mm ) 23.00
  • C ( mm ) 30.00
  • D ( mm ) 12.00
  • E ( mm ) 33.00
  • ( Mm ) F 20.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Awesome servos. works great on my AJ Slick 51" No flaws

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Awesome servos. works great on my AJ Slick 51" No flaws

Great torque, great centering, very smooth. The servos tend to buzz without load, but since they don't draw any current, it's not a problem. Using 2 on my Teksumo without any problem.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great torque, great centering, very smooth. The servos tend to buzz without load, but since they don't draw any current, it's not a problem. Using 2 on my Teksumo without any problem.

Out of the box they worked, but when I installed them 2 out of 2 broke on there own. I took them apart and found poor solder joints to the servo motor. Re-solder the motor brush leads and are working again. Them I read the other reviews. Very poor quality control.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Out of the box they worked, but when I installed them 2 out of 2 broke on there own. I took them apart and found poor solder joints to the servo motor. Re-solder the motor brush leads and are working again. Them I read the other reviews. Very poor quality control.

Costaud et fiable mais attrape du jeu avec le temps, comme tous les Corona !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Costaud et fiable mais attrape du jeu avec le temps, comme tous les Corona !

Sehr gnstiges , starkes, rckstellgenaues Servo , 939 bei mir sogar im Turbinen-Jet.
Wie alle Corona's bei mir Ohne Ausfall .
Manche knurren kurz ein wenig in Nullstellung - ist aber kein Problem .
Leider sind die Corona-Servos im EU-Lager selten in Stock.
Ich kaufe deshalb immer auf Vorrat in mein eigenes Lager :-) , dann habe ich sie , wenn ich sie bentige.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Sehr gnstiges , starkes, rckstellgenaues Servo , 939 bei mir sogar im Turbinen-Jet.
Wie alle Corona's bei mir Ohne Ausfall .
Manche knurren kurz ein wenig in Nullstellung - ist aber kein Problem .
Leider sind die Corona-Servos im EU-Lager selten in Stock.
Ich kaufe deshalb immer auf Vorrat in mein eigenes Lager :-) , dann habe ich sie , wenn ich sie bentige.

I haven't had this servo in the air yet but.. the bench testing has made me very happy .
It comes in at 14.2 grams or.5 oz. or71 CT or 0.456 ozt and 219 gn also 9.13 dwt. lol all joking aside its is a little heavier than they say....
1st thing I did was mount them after a quick servo test with my tester. the worst is to run wires and install a servo that wont work. I have had them. the response is very quick and you will need to adjust your travel via your radio because they are strong and will bend a small to med push rod....
2nd thing you NEED to tighten the servo case screws. every one was loose from a half to a full turn ..
as far ad
s the size of the arms they ship very short arms with it but does come with anti vibration hardware.
WHAT ARMS FIT ...
BEATS ME .
I have a huge box of servo arms and I found nothing that worked perfect. I did have one set of long red arms I could force on. they don't give a mesurment on the arm spline so I will 485mm on the splines and 483 in the splines hope this helps .
I have them moving some massive elevons so ill let you know how they work soon
would I buy more?
So far ....hell yes for the money better than the hxt 500or 900 servos they center good but they do make noise but hey they are digital

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I haven't had this servo in the air yet but.. the bench testing has made me very happy .
It comes in at 14.2 grams or.5 oz. or71 CT or 0.456 ozt and 219 gn also 9.13 dwt. lol all joking aside its is a little heavier than they say....
1st thing I did was mount them after a quick servo test with my tester. the worst is to run wires and install a servo that wont work. I have had them. the response is very quick and you will need to adjust your travel via your radio because they are strong and will bend a small to med push rod....
2nd thing you NEED to tighten the servo case screws. every one was loose from a half to a full turn ..
as far ad
s the size of the arms they ship very short arms with it but does come with anti vibration hardware.
WHAT ARMS FIT ...
BEATS ME .
I have a huge box of servo arms and I found nothing that worked perfect. I did have one set of long red arms I could force on. they don't give a mesurment on the arm spline so I will 485mm on the splines and 483 in the splines hope this helps .
I have them moving some massive elevons so ill let you know how they work soon
would I buy more?
So far ....hell yes for the money better than the hxt 500or 900 servos they center good but they do make noise but hey they are digital

ich kaufe nur noch corona servos... spitze in preis und leistung

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ich kaufe nur noch corona servos... spitze in preis und leistung

Ich benutze Corona Metallgetriebe Digitalservos in allen Gren ( ca 50Stck.)
Es war noch kein fehlerhaftes Servo dabei , alle sind stark, stellgenau, spielarm und der Preis ist dabei sehr gnstig - sehr zu empfehlen.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ich benutze Corona Metallgetriebe Digitalservos in allen Gren ( ca 50Stck.)
Es war noch kein fehlerhaftes Servo dabei , alle sind stark, stellgenau, spielarm und der Preis ist dabei sehr gnstig - sehr zu empfehlen.

preciso e affidabile ottimo per ciclico e flybarless

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

preciso e affidabile ottimo per ciclico e flybarless

These Servos are really good!!!

Very stable and precise. Only can recommend them!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These Servos are really good!!!

Very stable and precise. Only can recommend them!

Customer files
Corona 939MG Digital Metal Gear Servo 2.7kg / 0.13sec / 12.5g Download [2]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save