Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Corona DS-236MG Metal Gear servo 7.0kg / 0.12sec / 27g

Generating Links

Corona DS-236MG Metal Gear servo 7.0kg / 0.12sec / 27g

Prezzo:

Now save risparmia 0,00 € 0,00 €

12,25 €
Quantità:
Spedito da:
  • USA
  • Global
Stato:
disponibile
SKU:
014000036-0
Spedizione gratuita? Clicca qui per saperne di più!

Corona digitali servo di sono un must per il modellista che vuole un affidabile e di alta servo specifica.

Caratteristiche:
• Risoluzione superiore
• La banda morta più stretto
• Posizionamento accurato
• Risposta di controllo più veloce
• un'accelerazione più rapida
• Coppia costante per tutta la corsa servi
• Aumento della capacità di tenuta da fermo

Specifiche:
Modello: DS-236MG
Tensione di funzionamento: 4.8V / 6.0V
Corrente di funzionamento: 300mA / 400mA
Velocità di funzionamento: 0.13sec.60º / 0.12sec.60º
Coppia di stallo: 6.0kg.cm /7.0kg.cm
Dimensione: 28X14X32mm
Peso: 27g
Banda morta: ≤3uSec
Viaggio di funzionamento: 40 ° / un impulso lato 400us viaggiare
Equipaggiamento: metallo
Filo Connettore: 215 millimetri
Temperatura di esercizio: -20C ~ + 60C

  • Servo Coppia ( kg) ( min . 0.01kg ) 7.00
  • Servo Velocità ( Sec / 60deg ) 0.12
  • Servo A ( mm ) 37.00
  • Servo B ( mm ) 28.00
  • Servo C ( mm ) 33.00
  • Servo D ( mm ) 14.20
  • Servo E ( mm ) 40.00
  • Servo F ( MM ) 22.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Subdriver | Acquirente verificato

  • Overall
  • Quality
  • Value

Verry accurate, fast and powerfull servo

Jul 17, 2022

Centering is perfect, even erg smallest steering commando are folowed without delay and fast. Great servo, but be sure the power supply can handle the short but high amp bursts.

AEROBATIC | Acquirente verificato

  • Overall
  • Quality
  • Value

super strong lightweight servo

Dec 22, 2021

super strong lightweight servo. Centers perfect and has very little gear slope

Jason | Acquirente verificato

  • Overall
  • Quality
  • Value

Top Servo!

Dec 15, 2021

All 4 servos I purchased showed excellent centering and performance on my workbench tests. They have almost zero gear slope and are pretty fast. I thinbk they will perform great in my big gliders, etc.

w_glanz | Acquirente verificato

  • Overall
  • Quality
  • Value

sehr starke und gute Servos - noch kein Ausfall damit, sehr wenig Spiel

Nov 01, 2021

volle Punktzahl !

Martin | Acquirente verificato

  • Overall
  • Quality
  • Value

AMAZING CENTERING

Oct 29, 2021

I was gladly surprised by the results of bench testing thi servo. 100% accurate centeringwith a 40mm arm and very very litte slope in the gear, almost not feelable.
I am sure they work great in the air.

audiography | Acquirente verificato

  • Overall
  • Quality
  • Value

Leistungsservo

Feb 23, 2021

Sehr kräftig für die kleine Größe, kein Getriebespiel.

Oldsalt1 | Acquirente verificato

  • Overall
  • Quality
  • Value

okay but there are better at lower price

Feb 23, 2021

I did not pay attention about the specs when I ordered a bunch of these. I just assumed they would be standard hardware, but the output splines are 21 tooth and the output shaft is much smaller in diameter, so the availablity of larger metal arms is almost impossible to find . I always like to upgrade my servo arms and hardware to reduce the posiblility of flutter. Nylon arms are okay, but the clamping type 25T aluminum arms are the "cats pajamas". I would love these servos if they only had the more standard 25T spline output shafts. HK has a great selection of those, which I order by the gross, tor upgrade all my servos with.

Oliver | Acquirente verificato

  • Overall
  • Quality
  • Value

Leistungsstark und spielfrei

Feb 19, 2021

Habe mir zwei zum Testen bestellt und bin bis jetzt sehr zufrieden damit.

JerryT | Acquirente verificato

  • Overall
  • Quality
  • Value

Corona DS-236MG servo.....TRASH

Jan 07, 2021

Received 2, one internally damaged, the other vibrating excessively. Will not order again.

Anthony | Acquirente verificato

  • Overall
  • Quality
  • Value

Good Product Works Well

Sep 29, 2020

Worked as expected. No issues.

  1. 1
  2. 2
  3. 3
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!