-
Descrizione
prodotto -
4.6kg Corona DS238MG Digital Metal Gear Servo / 0.14sec / 22gModello: DS238MG
Tensione di funzionamento: 4.8V / 6.0V
Corrente di funzionamento: 300mA / 400mA
Velocità di funzionamento: 0.15sec.60º / 0.14sec.60º
Coppia di stallo: 4kg.cm / 4.6kg.cm
Dimensione: 29X13X30mm
Peso: 22g
Banda morta: ≤3uSec
Viaggio di funzionamento: 40 ° / un impulso lato 400us viaggiare
Potenziometro: 3 cursore / Direct Drive
Cuscinetto a sfera: MR106
Equipaggiamento: metallo
Filo Connettore: 215 millimetri
Range di temperatura: -20 ° C + 60c -
Product
Specifications -
Ulteriori informazioni
-
SKU:
DS238MG
-
Brand:
Corona
-
Peso (g)
45.00
-
Lunghezza
76.00
-
Larghezza:
31.00
-
Altezza:
50.00
-
Velocità ( Sec / 60deg )
0.14
-
Coppia ( kg) ( min . 0.01kg )
4.60
-
Unit Weight (g):
22
-
A ( mm ):
35.00
-
B ( mm )
29.00
-
C ( mm )
30.00
-
D ( mm ):
13.00
-
E ( mm ):
40.00
-
( Mm ) F
19.00
-
SKU:
-
Community
Discussions -
-
Rate&
Review -
heel goed doe zijn werkThese servos are very good. We use them allready in beginners planes. Nice giveaway is the part for laying Mount Position of servo that Comes with it ( see product pic. ). Really nice idea and should be done with other servos also. Recommended item.Sliders are very bad. It has very big backlash. I bought 3 servo, all off them have the same disadvantages.Some of them I have in use. They are precise, strong and reliable. Very good price/performance relation. Highly recommended to all.it was great. a ton of torque for it's size and cheap as frig. and about month of driving the gears went loose. now my front tires are just wobbling while driving. if you buy this you sure get what you are paying for. i would say it is worth 7 bucksQuick, smooth and quite quiet. Very happy to use these in my aeroplanes. I've bought 20plus Corona servos.One of the best and most reliable servos I have used!
Strong, powerfull and precise!
I highly recommend them!!!!Guter Preis, guter Servo, genau, schnell. . . . . . .I bought two. The servo's are very much let down by the quality of the servo arms as they are a very poor fit (on both ) The amount of slop may be acceptable to some. Once I have set up my model I may consider epoxying the arms (that brings its own set of problems if you need to change them later on.) Not something I would buy again. A real shame as the servo is not bad value.Burned at first use.
Servoyu alcya balar balamaz srcs kavrulup yand, hi kullanamadan p. -
Upload
Videos -
Upload
Files -
Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!
file di clientiHow to fix poor fit of horns Scaricare ora [592kb] Servo_corona_fix.pdf Scaricare ora [630.54Kb]