Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Sensore di corrente per OrangeRx Telemetry System

Generating Links

Sensore di corrente per OrangeRx Telemetry System

Prezzo:

Now save risparmia 8,28 € 8,28 €

Special Price 8,13 € 8,13 €

You save risparmia 8,28 € 8,28 €

Was  16,41 €

Quantità:
Spedito da:
  • Global
Già acquistato
Stato:
disponibile
SKU:
9171000552-0
Spedizione gratuita? Clicca qui per saperne di più!

Il sensore di corrente OrangeRx è stato progettato per funzionare come parte integrante del sistema di telemetria OrangeRx.

Dotato di connettori XT60 popolari per soddisfare direttamente tra la batteria di volo e alloggio ESC o distribuzione di energia, il sensore di corrente OrangeRx consente di monitorare la tensione e la corrente in tempo reale, fornendo una preziosa fonte di informazioni per poter mettere a punto il sistema di alimentazione .

Il sensore di corrente può essere utilizzato con altri sensori di telemetria OrangeRx per dare una panoramica completa delle vostre prestazioni modelli.

Compatibile con il sistema di telemetria OrangeRx (TM1100, TM1000, R620x, R720x, R820x, R920x, R1020x, R1220x.)

Caratteristiche:
• Semplice da usare
• Completamente compatibile con i più recenti OrangeRx ricevitori di telemetria in grado
• Dimensioni compatte
• Peso leggero

Specifiche:
Tensione massima della batteria: 3.7 ~ 52V (1 ~ 12S LiPoly)
Gamma di misura: 0 ~ 100A
Tensione di alimentazione: 3.7 ~ 9.6V
Consumo di corrente: 10mA
Dimensioni: 58 x 25 x 12mm
Peso: 14.2g

Nota: corrispondenza sensori telemetrici arancione RX e moduli di telemetria sono in arrivo, in modo da essere sicuri di tenere d'occhio il sito!

Carica video

Registrati per caricare video, per favore accedi o registrati

Registrati per scrivere recensioni, per favore accedi o registrati

PaulB | Acquirente verificato

  • Quality
  • Overall
  • Value

Not 100% accurate but works solidly.

Nov 26, 2020

I purchased 2 of these to uses with various Orange receivers but mainly to test the current which one of my helicopters was drawing.
I connected them both (one at a time) to a fixed wing model and with my Turnigy Power Meter at the same time. The Power Meter read 48 Amps and the sensor was reporting 38 Amps via telemetry!!
Both did the same.
I then connected a smaller fixed wing model to both the sensor and my Digital Multi Meter set to read current. This had the MMM showing 8 Amps and the sensor 6.
So, I could use the sensors to spot when I was drawing too much current by noting the 'standard' load figure and looking for a far higher current draw but I wouldn't trust it to test a set-up before selecting the correct size of ESC.
However, small light, useful and reliable (to date) and at this price, feel like I stole them.
Paul

flyer | Acquirente verificato

  • Quality
  • Overall
  • Value

it works

Aug 18, 2020

nice part, works perfect with ORX receivers, valuable

Porcorusso | Acquirente verificato

  • Quality
  • Overall
  • Value

Works as advertised

Mar 02, 2020

Would be nice if the circuit board were more compact

J P M. | Acquirente verificato

  • Overall
  • Value
  • Quality

Unstable

Nov 07, 2019

Very unstable, used the sensor plugged into an orange short range telemetry unit feeding a spektrum Rx. The display on the Spektrum Dx 9 was very unstable on the Tx display and when recorded onto an SD card and viewed on the spektrum TLM viewer the trend was jumping all over the place at constant throttle positions during testing. Think this was caused by noise from the ESC. Showed min and max values fine.

Johan | Acquirente verificato

  • Value
  • Quality
  • Overall

Good thing

Jul 22, 2019

It is always good to know how much current you draw in flight.

cuvatov | Acquirente verificato

  • Overall
  • Value
  • Quality

Very good

Aug 03, 2018

Very good

Jamie | Acquirente verificato

  • Value
  • Quality
  • Overall

Certified Buyer Rated

Dec 25, 2017

Great product for measuring amp draw and wattage for a power system. Also great for checking battery health and the remaining capacity percentage is very handy. But there are no markings on the case to say which way to plug in the balance leads of the battery so if you plug it in upside down with the battery plugged in it will short the battery. Otherwise a very nice product.

Jamie | Acquirente verificato

  • Value
  • Quality
  • Overall

Certified Buyer Rated

Dec 25, 2017

Great product for measuring amp draw and wattage for a power system. Also great for checking battery health and the remaining capacity percentage is very handy. But there are no markings on the case to say which way to plug in the balance leads of the battery so if you plug it in upside down with the battery plugged in it will short the battery. Otherwise a very nice product.

Jamie | Acquirente verificato

  • Value
  • Quality
  • Overall

Certified Buyer Rated

Dec 25, 2017

Great product for measuring amp draw and wattage for a power system. Also great for checking battery health and the remaining capacity percentage is very handy. But there are no markings on the case to say which way to plug in the balance leads of the battery so if you plug it in upside down with the battery plugged in it will short the battery. Otherwise a very nice product.

Jamie | Acquirente verificato

  • Overall
  • Value
  • Quality

Certified Buyer Rated

Dec 23, 2017

Great to know the amp draw of the drone to ensure the greatest efficiency. Works great with the orange receivers. I unsoldered the plugs and soldered wires directly to the board to save weight. The signal plug on the board can be flimsy when plugging and unplugging the signal wires. Works well and seems to be very accurate.

  1. 1
  2. 2
File dei clienti
Product Manual Download [136]
Current Sensor - Orange Download [166]
Current Sensor - Orange Download [166]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!