Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

D591-v3 Digi-micro servo 1.3kg / .09sec /8.5g

Generating Links

D591-v3 Digi-micro servo 1.3kg / .09sec /8.5g

Prezzo:

Now save risparmia 0,00 € 0,00 €

9,60 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
D591
Spedizione gratuita? Clicca qui per saperne di più!

Ad arco digitale micro servo

Ad arco a rendere più leggeri e più piccoli servi digitali in tutto il mondo!

Con un alto MCU fedeltà e un ottimo algoritmo, tu sei la garanzia di un funzionamento regolare e meno interuptions rumore.
Frequenza tecnologia di conversione mantiene il dispositivo di raffreddamento servo sotto esigente 3D e volo in elicottero, mantenendo anche un basso consumo energetico.

Caratteristiche:
Ad arco Digital Servo adotta la tecnologia di conversione di frequenza che lo rende rimanere fresco sotto selvaggio ed esteso il volo 3D e mantiene il consumo energetico piuttosto basso.
Estremamente stretta banda morta (¡Ü 4|Ìs) si rende conto del settore sensibilità leader.
Fail funzione di sicurezza (Lost Protezione Signal) --- ad arco Digital Servo mantiene la sua posizione e la coppia durante il segnale occasionale perso.
modalità Full AVCS Giroscopio DS compatibile
Leggero ma resistente struttura non interferiranno la manovrabilità 3D del vostro aereo.

Spec @ 4.8V
Coppia: 1.3kg / cm (coppia dinamica)
Velocità: 0.09sec / 60degrees
dimensioni 22.3x21.9x11.4mm
Peso: 8.5g
posizione neutra Accurate
banda morta molto stretta (<4US)
Insito FAIL SAFE (detiene la posizione se il segnale perso)
conpliant Futaba AVCS Giroscopio modalità DS.

**Note
Viene fornito con le corna!
Questo è un servo v3. Ha i seguenti miglioramenti;
-Molto Più ampia gamma di tensione 3 ~ 6v
-Funziona Con tutti i sistemi di alimentazione ESC / BEC, UBEC, NiMH / NiCd

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

blaz vodopivec | Acquirente verificato

  • Overall
  • Quality
  • Value

Arced Digital Micro Servo 1.3k

Nov 14, 2007

Very good digital servo for the price. Quick, strong, centers well, holds position, no glitches, much better than Corona. Less resolution than top digital servos, but hey, they cost four times more.

Michael | Acquirente verificato

  • Overall
  • Quality
  • Value

Acred D591

Nov 14, 2007

I purchased 3 of the D591 servo and so far very happy with the performance and the value. It replaced my HS-81 on the tail of my Trex paired with a GY401. The D591 did work in digital mode but the tail seemed to hunt. Will try again on a different heli setup. The D591 did very well on my small aircraft setups...just do NOT over drive them (as stated in other reviews)

Olaf Virk | Acquirente verificato

  • Overall
  • Quality
  • Value

Arced Digital Micro Servo

Nov 14, 2007

Quick, strong and low max current(200mA)- really frequency conversion digital servo.

But max pulse width is 2ms, after this the servo steps to end. Like potentiometer center and servo 1.5ms positions are not same. Maybe it's occasional defect. I have only one servo.

Markus Senn | Acquirente verificato

  • Overall
  • Quality
  • Value

D591-v3 Digi-Micro Servo

Nov 14, 2007

Very good digital servo for the price. Being just 9grams they are Perfect for Park flyer's. They are Quick, strong, centers well and holds position. I had no glitches. I replaced a couple of full size servos in a large balsa plane and they did the job just fine. I will buy more of these are great little servos.

msX | Acquirente verificato

  • Overall
  • Quality
  • Value

Great, with limitations

Nov 14, 2007

Great servo for that price, but doesn't work at 6V (4 AA batteries) and the servo way is limited to 135%.



Gutes Servo zu dem Preis, leider funktioniert das Servo berhaupt nicht an 6V - also 4 Mignon Batterien. Bei 5V (was die meisten BECs haben) gibt es jedoch keine Probleme. Die Wege sind auf 135% (sicher 125%) (Graupner/JR Wege) limitiert, daher nicht geeignet fr Delta-Modell (FunJet z.B.) Stellgenauigkeit ist digital-like super, die Anschlusskabel sind etwas kurz. Verarbeitung ist noch gut. Leider noch keine Langzeiterfahrungen vorhanden.

george philip | Acquirente verificato

  • Overall
  • Quality
  • Value

not recommended

Nov 14, 2007

Worked for a day or two and then quit. I was using on my HBK2 with a HH gyro.

Manuel Rodriguez Venegas | Acquirente verificato

  • Overall
  • Quality
  • Value

D591-v3 Digi-Micro Servo 1.3kg

Nov 14, 2007

Great item.

The digital servo works fine.

Good cheap.

Pollini Silvio | Acquirente verificato

  • Overall
  • Quality
  • Value

D591-v3 Digi-Micro Servo

Nov 14, 2007

Trs bon servos,je suis trs content

Pollini Silvio | Acquirente verificato

  • Overall
  • Quality
  • Value

D591-v3 Digi-Micro Servo

Nov 14, 2007

Trs bon servos,je suis trs content.

John Hatzidakis | Acquirente verificato

  • Overall
  • Quality
  • Value

Great Servo!

Nov 14, 2007

I use this in my trex 450, the tail is even more rock solid with this servo than the old HS-50 I used to have in it.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!