Diventa fornitore Blog Nuovi oggetti

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Dancing Wings Hobby (ARF) Boeing PT-17 Stearman Biplane Balsa 1400mm

Generating Links

Dancing Wings Hobby (ARF) Boeing PT-17 Stearman Biplane Balsa 1400mm


Now save risparmia 0,00 € 0,00 €

228,57 €
Non disponibile!
Spedizione gratuita? Clicca qui per saperne di più!

The Dancing Wings Hobby Boeing PT-17 Stearman is a detailed scale model of the pre-war military biplane trainer. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, a dummy engine, scale landing gear, and a full accessory kit. It is also supplied with all the necessary hardware including scale rigging to complete the kit.

The full-size Boeing PT-17 Stearman was used during the Golden Era of aviation in the 1930s as a primary military trainer. After the war thousands of surplus airplanes were sold to the civilian market. They then became popular as crop dusters, and at airshow displays doing aerobatics and wing walking.

The Dancings Wings Hobby Boeing PT-17 is very straightforward to assemble but will require some previous experience. All the major components such as the fuselage, wings, horizontal stab, and vertical stab are built and covered, and a full decal sheet is supplied. You must supply your own brushless motor, ESC, servos, transmitter, receiver, and a LiPo battery. You will also require some tools and glue to complete the build.

• Authentic-looking scale model of the Boeing PT-17 Stearman military trainer
• Constructed of strong, lightweight balsa
• Supplied with scale dummy engine and scale landing gear
• Airframe is factory-covered
• Includes a full decal sheet
• Supplied with a complete hardware kit including scale rigging

Type: Dancing Wings Hobby (ARF) Boeing PT-17 Stearman Biplane
Wingspan: 1400mm (55")
Length: 1080mm (43")
Flying Weight (Approx): 2.4kg (5.3lb)
Building Level: ARF kit (Almost Ready to Fly) does require assembly
Construction: Balsa wood with factory-applied covering

1 x Fuselage
1 x Pair of upper/lower wings
1 x Dummy engine
1 x Motor mount
1 x Horizontal stab
1 x Vertical stab w/rudder
1 x Landing gear
1 x Pair of scale wheels
1 x PVC windshields
1 x Decal sheet
1 x Assorted carbon tubes
1 x Scale rigging kit
1 x Complete hardware pack

Motor: 2815/3520-700/1000KV brushless outrunner
ESC: 40~60A brushless
Propeller: 12x6" or similar
Battery: 4S 2200~2800mAh LiPo
Servos: 2 x 17g, 2 x 37g
Radio: 4ch or more
Tools: Modelling knife, pliers, metal ruler, pin-vice, drills, etc
Glue: 20min epoxy or white glue, medium CA, thread-lock

  • IC / 2 : Elec Electric
  • Motorsize ( diam - o - cc ) 28.00
  • Apertura alare ( mm ) 1400.00
  • Length(mm) 1080.00
Carica video

Registrati per caricare video, per favore accedi o registrati

Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:

Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:

Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!