New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Dart 250 FPV Con Power Distribution, pulito e sporco illuminazione e LED

Dart 250 FPV Con Power Distribution, pulito e sporco illuminazione e LED

Shipped From:
  • USA
QTY:

Now save risparmia 37,61 € 37,61 €

Special Price 11,96 € 11,96 €

You save risparmia 37,61 € 37,61 €

Was  49,57 €

Stato:
Disponibile
SKU:
415000006-0
WANT FREE SHIPPING? Click here to find out more!

FUN-RC introduce il Dart 250 Mini Quad H, imballato con le caratteristiche che corrisponde a qualsiasi mini sul mercato e conserva ancora un prezzo di divertimento.

Il dardo ... Serie da Fun-RC racchiude alcune grandi caratteristiche, il design, la durata, sembra grande e tuttavia non rompere la banca .. I telai sono dotati di un sistema di isolamento dalle vibrazioni pulita e sporca, progettato per dare la fotocamera e il controller volo un bel giro liscio. I ditali vibrazione hanno hardware che li tiene attaccati in caso di incidente. Il Dart ha anche un orientamento fari e le uscite aux costruito nel sistema di distribuzione dell'energia che monta del CES, e ha diretto montaggio per XT60 / T-connettori, LED integrato per A / V e la FC! Il telaio ha canali di taglio a controllo numerico per il passaggio dei cavi attraverso il telaio, rendendo questo uno dei più puliti installa un mini può avere. Essi includono l'hardware telaio lucido e anodizzato, e anche il motore hardware di montaggio. Le braccia del motore sono un bel 5 millimetri di spessore per robusto senza danni incidente, e la luce ancora fatto in tutti i posti giusti. Il dardo ha anche opzioni di montaggio della macchina fotografica per FPV e HD, montato in avanti e lontano dalla vista prop.

Se si confronta il Dart al concorso l'unica che sia meno è il cartellino del prezzo.

Caratteristiche:
• sistema di isolamento Pulire e vibrazioni lo sporco con le serrature di crash
• Distribuzione di energia con costruito nel monte connettore di alimentazione e LED faretti
• Hardware lucido e anodizzato
• canali Wire routing per una installazione pulita
• braccia motore di spessore 5mm

Specifiche:
Passo: 250mm
Peso: 135g
Formato dell'imballaggio: 22.5 * 6 * 3.5 (CM)

richiesto:
Motore: 1806-2208 kv2000 ~ 2300
Elica: 5x3
controllo di volo: 30-45mm distanza di montaggio
Batteria: 3s 1300-1800ma
5CH Radio

* Nota: l'hardware non esposizione nelle immagini è incluso

  • SKU 415000006-0
  • Brand -
  • Capacità ( mAh ) -
  • Peso 180.0000
  • Lunghezza 220.00
  • Packaging Width 30.00
  • Altezza 60.00
  • Dart 250 400 FPV Quad Frame
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

OK here is the deal i got 3 of these when they came on sale for less then the full price and i still think i paid too much. The arms can not stand up to much of a crash and the frame will break as well in not much of a crash. The only thing this would be good for is simple fpv of someone who already knows how to fly and wont crash. No FPV racing here guys it just wont stand up to it. The frame is light and power distribution is good but the screws are 2mm or something and have a shallow hex hole so tightening them down can be a pain. This is not the drone you are looking for guys HK has much better options for the same or less.
PS lost fpv on first real flight came down on soft grass hard but not anything crazy and broke 3 arms.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

OK here is the deal i got 3 of these when they came on sale for less then the full price and i still think i paid too much. The arms can not stand up to much of a crash and the frame will break as well in not much of a crash. The only thing this would be good for is simple fpv of someone who already knows how to fly and wont crash. No FPV racing here guys it just wont stand up to it. The frame is light and power distribution is good but the screws are 2mm or something and have a shallow hex hole so tightening them down can be a pain. This is not the drone you are looking for guys HK has much better options for the same or less.
PS lost fpv on first real flight came down on soft grass hard but not anything crazy and broke 3 arms.

cute and tiny quad, packaging is so small its like a watch case. thin arms I don't think they love crashes, lets see how long will it take to destroy this lol

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

cute and tiny quad, packaging is so small its like a watch case. thin arms I don't think they love crashes, lets see how long will it take to destroy this lol

Really good design. Lower cage is stiff and robust, upper cage is more flimsy, but survived the crash which broke all 4 motor arms. Lots of space for FPV etc. Flies good with cc3d atom (version in protective case from HK)

Plastic screws were replaced with cable ties almost on day one.
For the price it is probably wise to buy second kit to be used as spares but people like to upgrade something they build with their own hands more than build another one :).
Will be great if upgrade parts will be available for the kit - CF plates, CF or aluminum motor arms etc.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Really good design. Lower cage is stiff and robust, upper cage is more flimsy, but survived the crash which broke all 4 motor arms. Lots of space for FPV etc. Flies good with cc3d atom (version in protective case from HK)

Plastic screws were replaced with cable ties almost on day one.
For the price it is probably wise to buy second kit to be used as spares but people like to upgrade something they build with their own hands more than build another one :).
Will be great if upgrade parts will be available for the kit - CF plates, CF or aluminum motor arms etc.

Good little frame. Arrived with all needed screws. rigidity is very good once correctly assembled. Arms seem strange, a kind of solid plastic or resin. Obviously, it is the weak part of this Racer. let's see when I will get its new RX.

Anyway, the conception Clean/Dirty is very good, The whole FC platin on silent blocks helps a lot to improve smoothness. smart ! You can set up whatever you want or you need inside : FPV gear, Osd, GPS, Baro, Mag, Lipo alarm, ... nothing should be damaged in case of crash !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good little frame. Arrived with all needed screws. rigidity is very good once correctly assembled. Arms seem strange, a kind of solid plastic or resin. Obviously, it is the weak part of this Racer. let's see when I will get its new RX.

Anyway, the conception Clean/Dirty is very good, The whole FC platin on silent blocks helps a lot to improve smoothness. smart ! You can set up whatever you want or you need inside : FPV gear, Osd, GPS, Baro, Mag, Lipo alarm, ... nothing should be damaged in case of crash !

I am using this frame and I have crashed it several times. It is quite surprising that the main body can absorb some significant impact. One of those crashes was an intended roll flip which ended up as a half circle and plunged to the ground. The main frame survived, it's the arms that always breaks, most of the time you can just super glue it back together, that is if you are lucky enough not to shatter it into pieces and it's unfortunate that hobby king is currently out of stock for the replacement arms. but all in all, this frame is a lot of fun...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am using this frame and I have crashed it several times. It is quite surprising that the main body can absorb some significant impact. One of those crashes was an intended roll flip which ended up as a half circle and plunged to the ground. The main frame survived, it's the arms that always breaks, most of the time you can just super glue it back together, that is if you are lucky enough not to shatter it into pieces and it's unfortunate that hobby king is currently out of stock for the replacement arms. but all in all, this frame is a lot of fun...

I bought this as my first quad. I'm no "pro" by any stretch of the imagination, so I am still learning as I go. At first I was a bit hesitant because each of the black frame pieces seemed to be flimsy...although, once I got it built and everything tightened up, the frame is actually quite solid and rigid. I'll be eager to get the electronics installed and get flying. For the money....I'd say its a great frame.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this as my first quad. I'm no "pro" by any stretch of the imagination, so I am still learning as I go. At first I was a bit hesitant because each of the black frame pieces seemed to be flimsy...although, once I got it built and everything tightened up, the frame is actually quite solid and rigid. I'll be eager to get the electronics installed and get flying. For the money....I'd say its a great frame.

I use it with the Baby Beast V2 motors on 4S Turnigy Nanotech 1300mAh and HQ5045 Props, awesome!!!!! Use it for FPV flights

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use it with the Baby Beast V2 motors on 4S Turnigy Nanotech 1300mAh and HQ5045 Props, awesome!!!!! Use it for FPV flights

Couldn't be happier with this frame. I love the dirty/clean section design. Frame went together without any problems.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Couldn't be happier with this frame. I love the dirty/clean section design. Frame went together without any problems.

Quite the fine frame, I received this as a gift from the Mrs. Arms are sturdy in my opinion, the frame does need a bit of prep for the tabs, but overall, a breeze to put together. Solder points are at just the right distance for even the most ham fisted hands out there and I really like the LED light bar, although it's rather unnecessary. I don't mind the G10, you can strengthen by using thin CA on the edges and using additional nylon posts, I have dropped this frame the same way I was dropped as a child, like me, it survived even after bouncing off a hardwood floor. 5 stars from me.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Quite the fine frame, I received this as a gift from the Mrs. Arms are sturdy in my opinion, the frame does need a bit of prep for the tabs, but overall, a breeze to put together. Solder points are at just the right distance for even the most ham fisted hands out there and I really like the LED light bar, although it's rather unnecessary. I don't mind the G10, you can strengthen by using thin CA on the edges and using additional nylon posts, I have dropped this frame the same way I was dropped as a child, like me, it survived even after bouncing off a hardwood floor. 5 stars from me.

This is a great frame. I don't think it can be beaten in terms of value for money. The build was simple and everything went together perfectly. It's a very well thought out design and has excellent flying characteristics. Admittedly, I haven't performed any significant crash testing, but so far everything is holding up well. Highly recommended!
My setup: Multistar Elite motors, Afro 12amp ESC's, Naze32 controller, 5x3 props.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a great frame. I don't think it can be beaten in terms of value for money. The build was simple and everything went together perfectly. It's a very well thought out design and has excellent flying characteristics. Admittedly, I haven't performed any significant crash testing, but so far everything is holding up well. Highly recommended!
My setup: Multistar Elite motors, Afro 12amp ESC's, Naze32 controller, 5x3 props.

  1. 1
  2. 2
Customer files
No File Name Download [932]
Dart250 manual p1-2 Download [1996]
Dart250 manual p3-4 Download [2287]
No File Name Download [413]
Finished build Download [692]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save