New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Kit Telaio Diatone Beta110 H4 V1.0 CF

Kit Telaio Diatone Beta110 H4 V1.0 CF

Shipped From:
  • Global
QTY:

Now save risparmia 0,00 € 0,00 €

11,58 €
Stato:
Disponibile
SKU:
366000141-0
WANT FREE SHIPPING? Click here to find out more!

Kit Telaio Diatone Beta110 H4 V1.0 CF

Questa Beta V1.0 telaio 100 millimetri passo Diatone è così facile da costruire vi farà volare in poco tempo. Tuttavia il telaio è ancora un forte accumulo di fibra di carbonio 1 mm.

Aggiunto al kit è un paio di pezzi supplementari nel caso in cui si perde un anello o due.

Prendi ronzano intorno al cortile o parco.

Caratteristiche:
• Piccolo passo 110
• Resistente telaio in fibra di carbonio 1 millimetro
• Fino a 60 mm eliche
• Motore gomma antivibrazioni per facilitare le vibrazioni
• costruire Facile

Specifiche:
Passo: 110mm
Diametro del motore: 8,5 millimetri
Dimensioni: 97 x 85 x 18 millimetri
Bare Peso: 8.4g

include:
Kit Telaio 1 x Diatone BETA110 V1.0

Richiede:
1 x 250 ~ 950mAh 1S LiPoly batterie
4 x 8mm motori
4 x 55 ~ eliche 60m (CW, CCW)
1 x regolatore di volo (consigliato Quanum Pico)
4 x ESC di (non necessario se si utilizza Quanum Pico FC)
1 x 5-6 canale RX / TX
pacchetto FPV 1 x (opzionale)

  • SKU 366000141-0
  • Brand Diatone
  • Capacità ( mAh ) -
  • Peso 28.0000
  • Lunghezza 200.00
  • Packaging Width 8.00
  • Altezza 180.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This is a GREAT little frame! Priced right as well. I use it with the Nano QX flight controller (brick), 8.5mm motors, Ladybird props, 600mah nanotech 1S batt, and Quanum Elite 25mw Cam/VTx combo and it is a great little FPV quad. Could use 300mah batt and make it lighter, but 600 gives 5plus min flight times.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a GREAT little frame! Priced right as well. I use it with the Nano QX flight controller (brick), 8.5mm motors, Ladybird props, 600mah nanotech 1S batt, and Quanum Elite 25mw Cam/VTx combo and it is a great little FPV quad. Could use 300mah batt and make it lighter, but 600 gives 5plus min flight times.

The bottom plate was cut from a (B- Quality) plate that was warped, as a result the frame is not flat and the motors cannot be mounted symmetrically which gives uneven thrust.

Correcting this is impossible as the fibers were probably baked under tension.
Complete garbage, do not recommend it!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The bottom plate was cut from a (B- Quality) plate that was warped, as a result the frame is not flat and the motors cannot be mounted symmetrically which gives uneven thrust.

Correcting this is impossible as the fibers were probably baked under tension.
Complete garbage, do not recommend it!

This is a pretty fun little frame. Took moments to assemble, and using a pico FC minutes to set up. It flies nicely, it seems strong enough for its size and weight. So far so good.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a pretty fun little frame. Took moments to assemble, and using a pico FC minutes to set up. It flies nicely, it seems strong enough for its size and weight. So far so good.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save