New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Turnigy DIY 6 Interruttore di posizione per Turnigy 9X / 9XR / 9XR Pro

Turnigy DIY 6 Interruttore di posizione per Turnigy 9X / 9XR / 9XR Pro

Discontinued Product

Please continue searching for a similar product.
SKU:
9171000869-0
WANT FREE SHIPPING? Click here to find out more!

Un altro aggiornamento eccellente per aggiungere ulteriori funzionalità al vostro Turnigy 9X, 9XR e 9XR Pro. Utilizzare questo kit per aggiungere una manopola 6 posizioni per il trasmettitore.

Per coloro che utilizzano un drone con ArduPilot si tratta di una soluzione ideale per sostituire difficile ricordare 2/3 combinazioni degli interruttori di posizione. Utilizzo di questa opzione manopola 6 posizione renderà mutevoli condizioni di volo molto più facile.

Basta sostituire uno dei tuoi manopole rotanti non utilizzati con questa manopola sei posizioni.

Una soluzione ideale molteplici modalità di volo e per la macchina fotografica nave drone volante.

Caratteristiche:
• Non è più difficile da ricordare 2/3 combinazioni degli interruttori di posizione con tx miscelazione complesso
• Facile da usare sei manopola posizione
• Compatibile con Turnigy 9XR, Turnigy 9XR Pro e Turnigy 9X
• Sistemi ArduPilot

include:
montaggio interruttore 1 x 6 posizioni
tasto 1 x 1,5 millimetri Allen (hex)
1 x Istruzioni

Richiede:
Saldatore
Saldare
Alcuni strumenti di base (pinzette, pinze, cacciavite)

Nota: Questo interruttore modalità può essere usato solo per sostituire una manopola continuo sul TX. Non può essere usato al posto di un interruttore a 2 vie o 3 vie.

  • SKU 9171000869-0
  • Brand Turnigy
  • Capacità ( mAh ) -
  • Peso 19.0000
  • Lunghezza 160.00
  • Packaging Width 19.00
  • Altezza 100.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

After reading the reviews I decided to give it a try. It DID work for me with a little mechanical intuition, but the other reviewers are correct, the shaft difference does make for a challenging conclusion. However, the soldering went well and the switch makes it a lot easier to utilize the different flight modes. Don't expect it to be perfect - the old knob certainly looks better on the 9XR and of course only fits the brass collar. Just be sure you get the set-screw to seat nicely on the flat part of the shaft. I took a dremel tool to the shaft as it was a little too long for my liking - it made the old knob stick up higher than the rest. Again, it worked for me.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

After reading the reviews I decided to give it a try. It DID work for me with a little mechanical intuition, but the other reviewers are correct, the shaft difference does make for a challenging conclusion. However, the soldering went well and the switch makes it a lot easier to utilize the different flight modes. Don't expect it to be perfect - the old knob certainly looks better on the 9XR and of course only fits the brass collar. Just be sure you get the set-screw to seat nicely on the flat part of the shaft. I took a dremel tool to the shaft as it was a little too long for my liking - it made the old knob stick up higher than the rest. Again, it worked for me.

Poor instructions - photos are incorrect and they tell you to re-use the brass collet. Unfortunately if you do this, you won't be able to use the new dial. I ended up re-using the existing potentiometer knob as it was a more solid setup than the plastic knob that comes in the kit. Also, the instructions don't clearly point out how to setup the 6 POS switch if you are using the more recent ERSKY9X firmware. Other than that though, it's a worthy add-on that provides very good functionality to help you get the most out of your 9XR/9XR Pro investment.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Poor instructions - photos are incorrect and they tell you to re-use the brass collet. Unfortunately if you do this, you won't be able to use the new dial. I ended up re-using the existing potentiometer knob as it was a more solid setup than the plastic knob that comes in the kit. Also, the instructions don't clearly point out how to setup the 6 POS switch if you are using the more recent ERSKY9X firmware. Other than that though, it's a worthy add-on that provides very good functionality to help you get the most out of your 9XR/9XR Pro investment.

Customer files
Pic info of HK 6 Position Switch Download [1476]
Pic info of HK 6 Position Switch_c Download [431]
6 POS Rotary Switch FIX for Turnigy 9X Download [379]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!