Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

DLG Laser Cut Balsa Kit 1000 millimetri Apertura alare

Generating Links

DLG Laser Cut Balsa Kit 1000 millimetri Apertura alare

Prezzo:

Now save risparmia 0,00 € 0,00 €

39,34 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
497000001-0
Spedizione gratuita? Clicca qui per saperne di più!

L'ultima aliante nel sempre popolare gamma built-up è questo Discus dimensioni lanciato aliante a portata di mano (DLG).

Con la sua apertura alare 1.000 millimetri il modello si adatta bene nella classe Mosquito DLG, le consente di essere pilotato da quasi tutto lo spazio aperto. E 'anche un gioco da ragazzi per portare in giro solo nel caso in cui si pone l'opportunità subdolo!

Building è un affare semplice, con accurata, taglio laser di balsa e strati per la fibra di carbonio rinforzata, ala struttura aperta e la fusoliera pod. Gli tutte le superfici foglio coda sono unite al resto del modello da un tubo in fibra di carbonio, rendendo questo robusto piccolo aliante pratica avere pronto al volo.
Se siete inclini a giavellotto, lancio DLG o pendenza, questo piccolo modello è destinato a portare un sorriso!

Caratteristiche:
• interblocco pezzi tagliati a laser
• ala in fibra di carbonio di rinforzo Spar
• asta in fibra di carbonio di coda
• Divertimento per costruire
• Facile da trasportare

Specifiche:
Apertura alare: 1.000 millimetri
Lunghezza: 784 millimetri
Airframe Peso: 110g (scoperto)
All Up Peso: 140g

Richiede:
Trasmettitore 2 canali e ricevitore
2 x 5 ~ servo 9g
batteria Micro ricevente
Covering Film
Costruire Adesivi

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Greg | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Aug 30, 2015

Good, easy to build kit. The instructions are in Chinese, but that doesn't matter. Quality is very good. The tail and elevator are a little weak, but I have not broken them yet. The rudder is inadequate. Make a new one with a little more surface area.

The carbon tube for the back of the fuse is tapered - very nice touch that gives good strength and stability.

The wing also seemed a little weak, but is actually surprisingly strong. Finished weight with a 350mah battery and ailerons is 196g.

IMPORTANT - When building the wing, use the formers that come with the kit to shape the bottom surface of the wing.

I flown this glider for about 2 months now, and love it as a slope soarer. It has better handling and penetration than the guppy, and when fitted with ailerons becomes quite acrobatic.

This glider is able to fly on the lift created by a long 3m high dune in about 4-6m/s wind and get enough energy up after 3-4 passes to do some acrobatics

For ailerons/flaperons: Cut the trailing edge pice just behind the wing ribs. Glue in a flat piece of carbon and re-attach the trailing edge with hinges or tape. There is enough room just behind the main spar for a micro-servo in each wing. This makes a thin aileron that works well, but is limited as flaperons.

madtaurus13 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Aug 21, 2015

, 1:1 700 1000,

Greg | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jun 20, 2015

High quality kit. The parts fit and are perfectly cut.
There is lots of scrap for modifications, reinforcing etc.
The instructions are a Little unclear, so dry-fit all parts.
There is plenty of room in the fuselage to move receiver and batteries, so balancing is easy. The wing is strong, with two carbon strips at the top and bottom of the spar.
The trailing edge can be cut to make ailerons. There is enough room in the wing for a micro servo in each wing giving it the ability to have flaperons.
Performance is fair for DLG due to the aircraft being a Little bit heavy, but this just adds speed when slope soaring.

mdmbc | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 11, 2015

This looks to be much higher quality than the other HK balsa kits. The parts are all numbered, and there is are full size layout plans in the box. The laser cutting looks good, and the hardware is also included.

Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!

Accessori