Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Dr Mad Spinta 2200kv 1600W 70 millimetri versione EDF Inrunner 6S (29 millimetri)

Generating Links

Dr Mad Spinta 2200kv 1600W 70 millimetri versione EDF Inrunner 6S (29 millimetri)

Prezzo:

Now save risparmia 0,00 € 0,00 €

34,33 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
107000116
Spedizione gratuita? Clicca qui per saperne di più!

Introducendo il nostro dottore pazzo spinta ad alte prestazioni serie di motori FES. Il nostro dottore sta alacremente lavorando dietro le quinte per venire con questa serie MAD di EDF motori ....... Potere? - Non mancano con questi!

Questo è 2200kv 6s versione in base alle unità del FES 70mm, con una potenza 1600watt enorme, questo inrunner 29 millimetri, non deve essere annusato!

La gamma di spinta Dr Mad di inrunner FES sono stati costruiti con una sola cosa in mente - massime prestazioni EDF! Sono dotati di avvolgimenti di statore ad alta temperatura, cuscinetti di alta qualità, sono la precisione bilanciato per buon funzionamento e sono di un design a 4 poli.

Over-progettato per gestire lo stress e la tensione di unità FES ad alte prestazioni e ad alta 'C' pacchi nominali. Il Dottore è stato duramente al lavoro per fornire agli utenti una serie di prova di proiettile, motori prestazioni FES estreme che sono costruiti per durare.

Ottenere un medico pazzo casa di potere di spinta per il FES!

Specifiche:
RPM / V: 2200kv
Tensione: 6s
Corrente max: 80A
Potenza massima: 1600 watt
Suggerito Rpm ambiente operativo.
Conte Lama Alta: 41000 rpm
Basso numero di lama: 46000 rpm
Poli: 4
Diametro: 29 millimetri
Fronte foro di montaggio Distanza: 19mm
Diametro albero: 4mm
Lunghezza del pozzo: 10mm
Mount anteriore Dimensioni filettatura: M3
Tipo di spina: 3.5mm proiettile-Connector
Peso: 174g

  • Kv ( rpm / v ) 2200.00
  • Correnti Max (A) 80.00
  • Resistenza ( mh ) 0.00
  • Max Tensione (V ) 22.00
  • Potenza ( W ) 1600.00
  • Albero A ( mm ) 4.00
  • Lunghezza B ( mm ) 60.00
  • Diametro C ( mm ) 29.00
  • Can Lunghezza D ( mm ) 60.00
  • Lunghezza totale E ( mm ) 75.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

  • Dr Mad Thrust EDF Motors
Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Turbo_Raven | Acquirente verificato

  • Overall
  • Quality
  • Value

Dr Mad Thrust 2200kv 1600w

Mar 14, 2018

Lots of power, More than 1800 g. on 4S and a 7x5 APC prop (89A)

Jose Maria | Acquirente verificato

  • Overall
  • Quality
  • Value

Dr Mad Thrust 2200kv 1600w

Mar 11, 2018

It is a real beast. On 4S and a 7x5 APC prop I have meassured 1855gr thrust at 86A and the motor is barely warm.

NICK | Acquirente verificato

  • Overall
  • Quality
  • Value

Pretty powerful

Aug 10, 2017

Just installed this motor in my FMS 70MM YAK with a custom fan and heatsink. Lots of power, seems great quality so far after a few flights. Time will tell. Motor is pretty heavy over all, but the price was right. Great budget motor..

Timothy | Acquirente verificato

  • Overall
  • Quality
  • Value

very Nice

Jan 17, 2017

Nice motor....6s 5-5 speed prop 80 amp speed controller in a Roc hobby swift no info on speed but guessing around 140 mph.... Again very impressive motor! A little warm but nothing extreme.

pavcon | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 09, 2016

I'm so impressed by the built quality of this motor. very well put together.. the wires are good. it has a notch on the front side of the shaft for better grip of the grub screw on the adapter. also the shaft extends to the back for a reason. did you ever try to tighten up the rotor nut but the motor was spinning? that's the reason of the shaft extension in the back which is not rounded to help you get a good grab with a nose pliers or any pliers so that you will tighten up the rotor nut without the motor spinning. amazing motor and performance also. with a 10 blader DPS series Impeller and a 3300mah Zippy compact 40c 6s pack I was pulling 70amps and around 1590watts IN THE PLANE (FW YAK-130 70mm)

Taylor | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Apr 25, 2015

Beast of a motor that you won't find anywhere else cheaper. Been running on a 12b FW impeller drawing over 2000wp on start up(settling to about 1700watts)in my Rebel on 6s for 3 months without a problem. This thing rocks, no better way to put it!! Keep up the awesomeness HK!
Peace
...Tayze

drdiscus | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Oct 23, 2014

I run a pair of these in 70mm 10 blade EDF's in alloy housings on 6s. Batteries are 2700mah 6s Turnigy NanoTec 65-135C. Toasted the batteries on 10 flights. 100A Turnigy dLux controllers. 80-ish amps. Motors are fine. I believe the alloy housing helps. Cooling at 1700 watts is essential, so with that said, they'll last, so long as you keep them from overheating.

My EDF's are out of balance from sand getting into the rotors and the units ran that way for a flight or two with no bent shaft. (Since that I have re-balanced the rotors).

I will also try the 29mm by 70mm 2600kv Dr. Mad Thrust motor.

They're a good build.

kevin | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Aug 29, 2014

Put it in my 70 mm sport jet with a 11 blade fast fast fast that's all I can say it is fast I ordered it on a Monday came on Friday flying Saturday can't ask for anything more

rodney | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Aug 22, 2014

Appears to be well made. Very strong magnet and nice bearings.

Fitted to multiplex funjet with a graupner cam speed 6x6 prop. 5s 2000mah 40c battery. Only done 2 flights but has reached 261km/h measured with hitec gps telemetry. Motor barely even warm.

Bench tested at over 1300watts @ 82A. Unfortunately unable to check wattage in flight. Will try 5x5 prop and 6s battery next.

Reimund | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jun 16, 2014

Klasse Motor mit mchtig Power. Leistet mit einem APC 4,75X5,5 Propeller 1535Watt bei 71Ah Stromaufnahme an einem 3300er 6S Lipo. Mit einem anderen Propeller geht noch mehr. Der Wellendurchmesser ist 4mm und nicht 3,175mm.

  1. 1
  2. 2
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!