Registrati

Product Finder

Impostazioni

Useful links

Chat dal vivo
 
[["US","AU","GB","DE"]]
Registrati

DSR-46TL elettrico Trike Ritrarre Set - modelli fino a 3,6 kg

DSR-46TL elettrico Trike Ritrarre Set - modelli fino a 3,6 kg

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
517 g
SKU:
DSR-46TL
Descrizione
prodotto

Il set EPF DSR-46TL contiene tutto il necessario per il montaggio a scomparsa sotto-carrozza di un 0,40 - modello di dimensioni 0,60, che richiede un trike sotto-carrozza, del peso di 1,8 kg - 3,6 kg. Queste offerta di unità di una soluzione semplice e veloce da installare, affidabile ed elegante per i problemi connessi con l'aria tradizionale e set di ritrazione meccanici.

La gamba Oleo è incluso in questa versione sono in lega di tipo di collegamento, con 51mm [2] pollici scala, ruote di gomma (di gamba principale 45mm per la ruota anteriore)

L'unità di controllo in dotazione dispone di rilevamento di stallo gamba, e si spegne ogni gamba che sta intrappolando contro la fusoliera per garantire la gamba tornerà verso il basso per l'atterraggio e dispone anche di una spia di alimentazione. parti caratteristica di metallo dell'unità ritrazione per stength e l'affidabilità e la gamba anteriore è orientabile tramite un servo (non incluse).

Specifiche tecniche:
Peso: 257g (tutti i componenti)
Oleo Lunghezza (Pin per asse): rete-110 millimetri, Front-90 millimetri
Diametro del perno: 5mm
Ritrarre vite spaziatura: 40mmx33mm
Tensione di funzionamento: 6v ~ 7.4v
Pneumatico anteriore: 45 x 19mm
Principale Pneumatici: 51 x 19mm

Incluso:
Unità di controllo
istruzione
Principale Ritrarre (x2)
Fronte Ritrarre withSteering Horn
Gambe principali Oleo con ruote (x2)
Anteriore Oleo gamba con la rotella

Nota: La serie EPF di ritrae sono un prodotto di qualità, ben progettato prodotti a Taiwan.

Product
Specifications

Ulteriori informazioni

  • SKU:
    DSR-46TL
  • Brand:
    N/A
  • Capacità ( mAh )
    No
  • Peso (g)
    517.00
  • Lunghezza:
    0.00
  • Larghezza:
    0.00
  • Altezza
    0.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I have a set installed in an OV-10 and they have a nice scale-like appearance for that plane. They work ok and the overload protection works ok. The nose gear steering has a little slop in it so you will want to keep everything else in you nose gear linkage tight. Unfortunately, the plastic mounting tabs are fairly fragile and easily broken. sonicelectric.com has metal sells plates for about $23 per gear as well as many other spare parts. The sonic electric side plates are nicely made and fit well but are somewhat tricky to install with all the gears and shafts that you need to line up. The hole spacing of the metal mounting tabs is slightly wider that the plastic too. I think the Hobby King set would be a better value with the metal side plates at a slightly higher price.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Not good at all. These retracts are ment to lift up to 3.6 Kg. I have installed them at an EDF Mirage weighting only 2.4kg and at the very first landing (which was an extra smooth one) the nose wheel is uncotrolable, turning by itself left and right at least 2cm without any rudder input. Very unhappy with the retracts
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice and very well made retracts but they are BIG. Have had mine laying for a year now with no suitable plane to mount them in. The measurements given here are rediculous. For instance "Oleo Length (Pin to axle): Mains-110mm, Front-90mm". Who wants to know the distance to Pin? What pin? THey mean the pin coming out of the retract servo. What you need to know is distance from wheel axle to the pivoting point on the retract servo and this is a hefty 150 mm so with the wing wheel diameter of 50 mm, the distance to ground is 175 mm. And the servo is big or 25 mm deep, 27 mm wide and 46 mm long. And I wonder why you need 6V to 7.4 V to drive these? Why not 4.8V?? It's kind of silly as I normally use 4.8V for all other servos so now I will need a separate BEC. I give only 4 crowns because of poor specifications from HK
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I received mine last week. The retracts works fine, but...
1) the plastic chasing is not good quality. Mine holes for the scres crecked by small preasure on them. I have a lot of wories about hard landing. Thats why i install it a little bit may way with a lot of epoxy glue and some wood securisation :o(
2) The wheels! OMG...i have never seen such soft wheels. I have to change them as my 4,5 kg plane (SAVEX L-39) is deforming them while standing.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great retracts, very nice quality. Thay work very scale like. I will put them on a vortex 32 with a p20 turbine.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I received mine a little while ago. I worked all last night to make a good mount for them in a plane. I just tried to run them. But nothing happens. I have hooked them up as I should. I tried to put one retract straight in the receiver, and the retract opened. But now I can't get it closed. Anybody know what the problem is???
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Picked up from post today, very impressed! lovely quality, smooth slow scale operation with over center locking arm. Will go in an own designed Parnavia Tornado along with two of the same manufactures ducted fans, also of the same high quality of manufacturer. would like to see the metal side plates option available though.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.