Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Durafly ™ JU-87G Stuka w / flap e luci 1.100 millimetri (PNF)

Generating Links

Durafly ™ JU-87G Stuka w / flap e luci 1.100 millimetri (PNF)

Prezzo:

Now save risparmia 0,00 € 0,00 €

203,37 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
9142000088
Spedizione gratuita? Clicca qui per saperne di più!

Durafly® ™ ancora una volta stabilito lo standard di questa alta qualità JU-87G Stuka che ha dettaglio scala sufficientemente e caratteristiche tecniche per mantenere tutti gli appassionati di warbird felice. La gamma 1100 millimetri offre al pilota RC un modello formato pratico che può essere facilmente trasportato e utilizza il sempre popolare pacchetto 2200mAh 3s Lipoly, ma allo stesso tempo, il modello è abbastanza grande per avere presenza ed è in grado di affrontare la maggior parte dei campi aviazione, non parlare di un po 'di vento, che lo rende molto pratico.

Così come aspetto fantastico, questo Stuka è plug and fly, cioè è necessario pochissimo lavoro di assemblaggio. Il potente motore outrunner, ESC, luci di navigazione e servi sono tutti pre-installato lasciando a colla sul tailfeathers e qualche scala dettagliare, bullone sulla spina di ali e andare in volo!

Abbiamo volato questa superba Stuka ampiamente durante i test e non vi deluderà, vi è abbondanza di potere per quelle manovre warbird davvero di scala e la struttura del velivolo è viceless senza alcun accenno di una stalla punta. I servi falda pre-installati hanno una bella, un'operazione lenta per aiutare a prevenire mongolfiera e le alette si permettono la velocità di avvicinamento per arrivare fino a una scansione senza un pizzico di wingrock. Non c'è dubbio, questa è una fantastica warbird guardare e vola facilmente come un allenatore ad ala bassa!

Caratteristiche:
• Scala Dettaglio Ultra
• Qualità di costruzione e finiture di alta
• Plug & Fly, è sufficiente aggiungere RX e Lipoly (non incluso) e volare!
• 37 millimetri opzionale Cannon Pod di, è sufficiente far scorrere il
• robusto Carro in grado di gestire praticamente qualsiasi striscia
• Costruzione EPO Schiuma dura
• Flaps dotato di serie di servi un'operazione lenta per il realismo e per prevenire mongolfiera
Luci di navigazione • pre-installato
• Facile e Veloce Edilizia

Specifiche:
Apertura alare: 1.100 millimetri
Lunghezza: 820 millimetri
Peso di volo: 1000g
Motore: 3536 850kv Brushless Outrunner Motor
ESC: 35A w / BEC
Ala Area: 18.6dm2
Carico alare: 53.8g / dm2

include:
manuale di foto completa
tutto l'hardware
Y-Leads, cacciavite

Richiede:
La tua 5 canali TX / RX
2200mAh 3s Lipoly Batteria
colla Foam-safe

Pezzi di ricambio disponibili QUI!

  • Durafly™ JU-87G Stuka w/flaps & lights 1100mm
Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

philippe | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Aug 10, 2015

Trs bon avion, rien modifier, juste quelques collages parfaire. Vol vraiment tendu, dcollage super simple: il se lve trs bien pour un long roulage la drive. L' atterrissage ce fait en douceur sans volets (ils ne servent qu'a faire plus vrai, c'est tout). Avion trs silencieux, gnial!!! A recommander aux pilotes confirms qui veulent un Warbird avec une gueule diffrente. Juste petit bmol... il est blanc et gris donc il ne se voit pas bien dans un ciel laiteux.... normal c'est sa tenue de camouflage... Accu 3s, 2200 ma/h, mettre au fond dans la cage, ainsi il est lgrement piqueur: Parfait pour moi. Que du bonheur.. Je possde aussi le corsair de Durafly, qui est trs bon, mais je prfre ce Stuka.....

vadim | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jun 29, 2015

I got your Ju87 ago. But the fly had yesterday. Plane class - I met all my expectations. Sustainable flight to the landing comes perfectly. Durafly keep it up. When released into production Ju88?

Widowmaker | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 25, 2015

My first Durafly model, and I am a little disappointed. The plane came with one of the ailerons bent, even tho the package was not dented in the area. The nice white parts of the plane have yellow over spray on it. Maybe I am being to picky.

Rob666 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jan 16, 2015

This is my fourth Durafly model, up until this point I have been very pleased with the products. In the case of the Stuka, the quality has gone way down hill. The unit is not white, the top of the main wing and the fuselage are a dirty yellow color, while other parts are white. A total mismatch.
I am VERY disappointed in the appearance.

Tamas | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Aug 08, 2014

I'm currently in the assembly process.

Right after opening I see the static flaps are fallen off. No problem I can fix it with some glue.

First step in assembly to glue the elevators to the tail. During this I noticed the whole fusalage and tail are slightly twisted. I tried to make it straight but no succes. Hopefully triming will be enough to balance it.

Then next step would be to mount the landing gear on the wings.
This supposed to be mounted with 4 screws. Problem is you can not screw in the screws vertically beause there is no room for your hand and screw driver from the landing gear. But the main problem is that the screw holes do not have screw threads and the material is so hard that it is not possible to screw in the srews.

I stopped building the plane here.
I might have to just glue the landing gears on, which means less strenght.

Richard | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jul 08, 2014

Finally got around to flying the Stuka today. I have had it built for several months, and was kind of intimidated by it. It just looked like it would be difficult to fly. Anyway, I shouldn't have waited. It required very little trimming, a bit of up elevator, and a couple of clicks of right rudder, and she was flying fantastic! Actually very stable in the air. It will do rolls, but they are slow and require some down elevator while inverted to keep from loosing altitude. Loops are big and open. I actually switched from low rates to high on this one to get a bit more response. It handled a light wind with no issues, and had no problems taking off from a grass field. It does have a tendency to flip on landings in grass though. I thought I had it down since it was rolling along nicely after touching down, but hit some thicker grass and flipped. No damage, except for the antenna on top of the canopy. I flew it twice, the second time with all the trims set, it was a joy to fly, and really looks good in the air. The flaps work well for slowing the plane down, and mine didn't pitch up when I deployed them initially at altitude to see how the plane would respond. Overall, I give this one 5 stars. Durafly has a winner with this one, and again, those low passes really look great with this plane!

Sebastian | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Apr 20, 2014

Great plane for the money. Minor defect in mine? Tail was off by a small angle, did not really affect flight too much. Loves to torque roll so watch out.

Martin | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 10, 2014

Ich bin berrascht wie gut das Teil eigentlich fliegt. Nach dem ich es ausgepackt hatte hatte ich so meine Zweifel. Aber mit ca 50g Blei vor dem Heckspron fliegt die Stuka. Es gibt so wenig Sterne wegen den Anlenkungen. Die mssen selber angebracht werden. Wenn man die Teile sieht und probiert die Ruderhrner anzubringen weis man auch warum. Das ist eine Fummelei und es passt nichts. Ich empfehle die Schrauben in die Ruderhrner einzudrehen und dann das Horn mit 5 min Epoxy anleimen. Der Schwerpunkt ist ok so wie angegeben, aber eben es braucht Blei am Ende. Das ist fr mich ein so nicht ok. Wer denkt er bekommt das hin ohne die MGs der irrt. die haben keinen Einfluss auf den SP nur aufs Gewicht. Aber alles in allem ist die Schaumwaffel so ok.

Wayne | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Oct 27, 2013

Really happy with this plane. It was the first durafly model I bought, and through inexperience, it took me some time (months) to complete the build. Started the build a couple months ago, left it aside for a long time, and only completed the build last week. I was a bit woried about flying it. Looking at that wing, i was worried it wouldn't come off the ground without a long run-up, and I don't fly off a long runway :). All for nothing. The plane just about leaps into the air, and flies very well, if not awefully aerobatic. Flies a lot faster than I thought it would, and absolutely looks the part in fast fly-bys and dives. All in all - really pleased with it. Now all I got to do is find me some "Jericho trumpets" to attach to the wings :)

GaraKan | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Sep 14, 2013

Love love love this plane! It flew nice and smooth, very little trim needed. It can do loops, rolls, etc. My maiden ended with a minor crash due to my hindsight with the elevator. It's tiny, so you need to up the throws for the ele. Mine couldn't yank up hard enough as I was so used to... such... hard yankings. But other than that, it held up well, no breakages, tough, tough, cg is dead on, love the design, love the feel of the flight, very highly recommended!

  1. 1
  2. 2
  3. 3
  4. 4
File dei clienti
manual Download [5955]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!