New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Easy 3D Balsa Glow / 1.280 millimetri EP (ARF)

Easy 3D Balsa Glow / 1.280 millimetri EP (ARF)

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
Peso:
3910 g
SKU:
437000007
WANT FREE SHIPPING? Click here to find out more!

L'Easy 3D è un grande club di dimensioni modello acrobatico dello stile tradizionale che è stato progettato per essere molto divertente così come a basso costo e facile da costruire.

L'Easy 3D è leggero, ma progettato per gestire un po 'di abuso! Per esempio, la lega sotto-carrozza è unicamente in gomma montato, il ruotino di coda orientabile utilizza una notevole timone e fusoliera mount, tutte e tre le ruote utilizzano pneumatici adeguati, le corna di controllo sono di tipo pesante e il cappuccio è di una costruzione GF duro . Sono inclusi anche con l'Easy 3D è supporti per entrambi bagliore e EP, serbatoio del carburante, montare e filatore del motore, che lo rende ottimo rapporto qualità-prezzo!

Questo grande "club" performante modello acrobatico è anche a buon mercato per costruire, standard di servo la volontà di essere più che all'altezza del compito per tutti, ma i piloti 3D più hardcore e non vi è alcun dubbio la capacità di questo modello ben ragionevoli, è brillante prestazioni a bassa velocità in combinazione con la sua facile da pilotare natura rendono l'Easy 3D un grande primo modello 3D o sui tassi bassi, un modello acrobatico grande divertimento!

Caratteristiche:
• Costruzione leggera balsa / Ply
• Colori vivaci e tradizionale Vedere attraverso Coprire, grande per l'Orientamento
• Costruire facile e veloce
• in gomma montato U / C
• Hardware completa gratuita
• Grande Piano Primo 3D
• Monti sia per Glow o EP
• Resistente Pneumatici in gomma All Round
• Collegare le ali per un facile trasporto
• Ampio, Tettoia Quick Release

Specifiche:
Apertura alare: 1.280 millimetri
Ala Area: 45dm2
Lunghezza: 1.190 millimetri
Peso: 1900g ~ 1950g

Richiede:
Il proprio 6 canali TX / RX
0.46 Motore di incandescenza / 42 millimetri Brushless Outrunner Motor intorno 800w (3D)
5 x standard Servo (4 x per la versione EP)
60A ESC (EP Version)
RX Batteria (Lipo o Nimh)
UBEC (per EP o Lipo RX batteria)
4s Lipo 2700mAh ~ 3300mAh (EP Version)

  • SKU 437000007
  • Brand -
  • Capacità ( mAh ) -
  • Peso (g) 3910.00
  • Lunghezza 940.00
  • Larghezza 210.00
  • Altezza 430.00
  • Easy 3D Balsa Glow/EP
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This is a very will made plane putting this together took no time at all. I have put a OS40 glow using a 11x4 prop plenty of thrust good for prop hanging and 15pcnt nitro. Total weight of around 1.8 kg. If they restock may buy a second.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a very will made plane putting this together took no time at all. I have put a OS40 glow using a 11x4 prop plenty of thrust good for prop hanging and 15pcnt nitro. Total weight of around 1.8 kg. If they restock may buy a second.

the medium is set, the engine cowling is low in fiber quality and used without paint peels. About the price, shipping to Brazil is expensive which makes the product benefit with average cost. The Construction Builder wood / balsa looks good.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

the medium is set, the engine cowling is low in fiber quality and used without paint peels. About the price, shipping to Brazil is expensive which makes the product benefit with average cost. The Construction Builder wood / balsa looks good.

This is a very good value 3D plane. It is personally my first plane, and it was fairly straight forward to build. Very light weight, loads of power with a .46 nitro and a 10x7 prop. Elevator snapped on me under steep descent, but that was probably my fault for over-speed, managed to land with minimal damage which was very impressive as half went completely and the half with the control horn was barely in place. (Landed hard taking wheel mounts off and breaking engine mount, easily replaced/repaired. Need to build myself an elevator).

Everything inside the box is of good quality, very impressed with it for my first plane. Is touchy and took some getting used to first flight, so perhaps not best choice for first plane, but I managed so if you are keen to skip the trainer stage, not a bad choice.

Very good value as it was cheaper for my to ship from HongKong to Australia, than purchase anything locally.

NOTE: This plane does not come with engine mounts as stated in the description!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a very good value 3D plane. It is personally my first plane, and it was fairly straight forward to build. Very light weight, loads of power with a .46 nitro and a 10x7 prop. Elevator snapped on me under steep descent, but that was probably my fault for over-speed, managed to land with minimal damage which was very impressive as half went completely and the half with the control horn was barely in place. (Landed hard taking wheel mounts off and breaking engine mount, easily replaced/repaired. Need to build myself an elevator).

Everything inside the box is of good quality, very impressed with it for my first plane. Is touchy and took some getting used to first flight, so perhaps not best choice for first plane, but I managed so if you are keen to skip the trainer stage, not a bad choice.

Very good value as it was cheaper for my to ship from HongKong to Australia, than purchase anything locally.

NOTE: This plane does not come with engine mounts as stated in the description!!!

Customer files
No File Name Download [2152]
No File Name Download [1903]
failed elevator Download [2646]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save