Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Easy 3D Balsa GP / 1.280 millimetri EP (ARF)

Generating Links

Easy 3D Balsa GP / 1.280 millimetri EP (ARF)

Prezzo:

Now save risparmia 0,00 € 0,00 €

95,36 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
4370000017-0
Spedizione gratuita? Clicca qui per saperne di più!

L'Easy 3D è un grande club di dimensioni modello acrobatico dello stile tradizionale che è stato progettato per essere molto divertente così come a basso costo e facile da costruire.

L'Easy 3D è leggero, ma progettato per gestire un po 'di abuso! Per esempio, la lega sotto-carrozza è unicamente in gomma montato, il ruotino di coda orientabile utilizza una notevole timone e fusoliera mount, tutte e tre le ruote utilizzano pneumatici adeguati, le corna di controllo sono di tipo pesante e il cappuccio è di una costruzione GF duro . Sono inclusi anche con l'Easy 3D è supporti per entrambi bagliore e EP, serbatoio del carburante, montare e filatore del motore, che lo rende ottimo rapporto qualità-prezzo!

Questo grande "club" performante modello acrobatico è anche a buon mercato per costruire, standard di servo la volontà di essere più che all'altezza del compito per tutti, ma i piloti 3D più hardcore e non vi è alcun dubbio la capacità di questo modello ben ragionevoli, è brillante prestazioni a bassa velocità in combinazione con la sua facile da pilotare natura rendono l'Easy 3D un grande primo modello 3D o sui tassi bassi, un modello acrobatico grande divertimento!

Caratteristiche:
• Costruzione leggera balsa / Ply
• Colori vivaci e tradizionale Vedere attraverso Coprire, grande per l'Orientamento
• Costruire facile e veloce
• in gomma montato U / C
• Hardware completa gratuita
• Grande Piano Primo 3D
• Monti sia per Glow o EP
• Resistente Pneumatici in gomma All Round
• Collegare le ali per un facile trasporto
• Ampio, Tettoia Quick Release

Specifiche:
Apertura alare: 1.280 millimetri
Ala Area: 45dm2
Lunghezza: 1.190 millimetri
Peso: 1900g ~ 1950g

Richiede:
Il proprio 6 canali TX / RX
0.46 Motore di incandescenza / 42 millimetri Brushless Outrunner Motor intorno 800w (3D)
5 x standard Servo (4 x per la versione EP)
60A ESC (EP Version)
RX Batteria (Lipo o Nimh)
UBEC (per EP o Lipo RX batteria)
4s Lipo 2700mAh ~ 3300mAh (EP Version)

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Mark | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Mar 23, 2015

Very good plane,stable,easy landing,capable for 3D.Flies without problems on a lower speed (not to low!).Takes a lipo 4S/4000 without any problem what does give a flying time from about 8 minutes.Motor SK3 4240 ,prop 14x8 wood.All right for H.K.

strawface | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 05, 2015

Try again signed me out before I had posted.
Nice plane looks and feels well built.
If you want to run Glow then you need to cut the bolts down on the landing gear mounts inside to make enough room for the tank to fit in .
I have made mine Electric using a 1100w motor 4s 4000mah 40c lipo 100A opto esc sbec .
run motor on a 13x6 prop = 928w 80A should be plenty for my prop hanging 3D moves.
900watts is about the same as a .46 glow
Had to move battery back to get the c of g .
This plane is for 3D not for fast flying.
Once I get the time and weather to fly it I will give the results

Ableflyer | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Dec 31, 2014

Good looking plane, great hardware. My only deduction is because I had to inject glue into the wing to secure some parts that were loose. I haven't assembled it yet but am getting ready. I have an OS .46 2 stroke to put on it. It should zoom.

Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!