New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

F330 fibra di vetro Mini Quadcopter 330 millimetri telaio

F330 fibra di vetro Mini Quadcopter 330 millimetri telaio

Discontinued Product

Please continue searching for a similar product.
SKU:
260000006
WANT FREE SHIPPING? Click here to find out more!

La F330 è un telaio 330 millimetri quad ben pensato costruito con materiali di qualità. Il telaio principale è la fibra di vetro, mentre i bracci sono costruiti in poliammide nylon ultra resistente.

Il montaggio è un gioco da ragazzi con le maniche in ottone pre-threaded per tutti i bulloni del telaio, quindi non sono necessari dadi di bloccaggio. Esso utilizza una dimensione del bullone per l'intera costruzione, rendendo l'hardware molto facile da mantenere in ordine e richiede solo una dimensione della chiave esagonale da assemblare.

Una grande caratteristica di questo telaio è grandi linguette di montaggio nella parte anteriore e posteriore del telaio piastra inferiore principale per telecamere montaggio o altri accessori. Questo lo rende un ottimo modo per prendere il video aerea o volare FPV, senza la necessità di aggiungere eventuali staffe di montaggio supplementari.

La F330 dispone anche di armi colorate (2 bianchi e 2 rossi) che sono grandi per l'orientamento. Aiuta a mantenere volare nella direzione giusta senza la necessità di diversi oggetti di scena colorate.

Offriamo una linea completa di elettronica multi-rotore come il controllo multi-rotore di bordo, ESC e motori. Non è mai stato più facile o più conveniente per ottenere un quad in aria!

Caratteristiche:
• Costruito fibre di vetro di qualità e nylon poliammide
• Pre-threaded manicotti di ottone per tutte le viti telaio
• armi colorate per l'orientamento per tenervi volare nella direzione giusta
• linguette di montaggio di grandi dimensioni sul telaio piastra inferiore principale per un facile montaggio fotocamera
• Facile assemblaggio

Specifiche:
Larghezza: 330 millimetri
Altezza: 48mm
Peso: 147g (w / out elettronica)
Fori Motor Mount Bolt: 16 / 19mm

richiesto:
4 x 28mm 1000 ~ 1200KV (o dimensioni simili / kv)
4 x 12 ~ 20 Amp ESC
4 x 7x5 ~ 8x4 Prop (2CW & 2CCW)
1 x Dipartimento Funzione multi-rotore Control Board
Batteria 1 x 1000 ~ 1800mAh 3S 11.1v Lipoly

  • SKU 260000006
  • Brand -
  • Capacità ( mAh ) -
  • Peso 193.0000
  • Lunghezza 160.00
  • Packaging Width 80.00
  • Altezza 120.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Good frame for the price. There's a bit of a slight twist in the arms but hasn't effected performance

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good frame for the price. There's a bit of a slight twist in the arms but hasn't effected performance

nice frame lightweight fit my multistar 2212-920 motor 9" props

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

nice frame lightweight fit my multistar 2212-920 motor 9" props

This little gem is a fantastic Quad frame kit! I have no issue with this little beasty and with Turnigy Aerodrive SK3 2822-1275 and some 8x4.5 props this thing is very quiet running. Im using the 12A afro esc and a kk2.15 mini board with very low gain settings and im getting 20 minutes with a 2200mah 40c! I covered mine in black carbon fiber vinyl on the bottom plate and red carbon-fiber vinyl on the top plate. Looks great with red Props and really has tons of power and is very Fun to fly.......I was racing against some rc truck's today and it was fun to win in sheer speed and even better to blast up to the moon after i would win each time and boy did the rc truck guys have problems keeping there eyes on there machines i mean how cool is a little zippy quad????

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This little gem is a fantastic Quad frame kit! I have no issue with this little beasty and with Turnigy Aerodrive SK3 2822-1275 and some 8x4.5 props this thing is very quiet running. Im using the 12A afro esc and a kk2.15 mini board with very low gain settings and im getting 20 minutes with a 2200mah 40c! I covered mine in black carbon fiber vinyl on the bottom plate and red carbon-fiber vinyl on the top plate. Looks great with red Props and really has tons of power and is very Fun to fly.......I was racing against some rc truck's today and it was fun to win in sheer speed and even better to blast up to the moon after i would win each time and boy did the rc truck guys have problems keeping there eyes on there machines i mean how cool is a little zippy quad????

nice frame, a bit heavy. perfect for first quad

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

nice frame, a bit heavy. perfect for first quad

This is a affordable lightweight frame great for beginners wishing to build a quadcopter. The top and bottom mounting plates are of adequate thickness and also flex a slight bit. However, the weakness of this frame is in the arms. The plastic is made of extremely poor quality. You can clearly see the molding and chiseling lines on the arms. The arms are easily snapped at the motor mounting section where it is thinner than the other parts. You can't buy replacement arms for this so either buy 2 kits or not at all, because you are bound to snap an arm.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a affordable lightweight frame great for beginners wishing to build a quadcopter. The top and bottom mounting plates are of adequate thickness and also flex a slight bit. However, the weakness of this frame is in the arms. The plastic is made of extremely poor quality. You can clearly see the molding and chiseling lines on the arms. The arms are easily snapped at the motor mounting section where it is thinner than the other parts. You can't buy replacement arms for this so either buy 2 kits or not at all, because you are bound to snap an arm.

Good quality parts on this if a little heavy but with the setup i'm running i don't have a problem in that way. setup is KK2.1.5 3s 2200, D2822/17 1100kv, 8x4.5 props, HobbyWing X-Rotor 20A OPTO ESC. its off the ground before 50pcnt throttle. would be nice if it had a 3rd deck on top though.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good quality parts on this if a little heavy but with the setup i'm running i don't have a problem in that way. setup is KK2.1.5 3s 2200, D2822/17 1100kv, 8x4.5 props, HobbyWing X-Rotor 20A OPTO ESC. its off the ground before 50pcnt throttle. would be nice if it had a 3rd deck on top though.

Nice little quad frame - kind of brittle, though!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice little quad frame - kind of brittle, though!

Very pleased with this little frame as this was my frist quadcopter build. Not only pleased with the product, but the wealth of information on this site through videos Hobbyking has done, and the discussions. I have just ordered the F450 frame and the electronics to start my 2nd build now that I've got my first under my belt.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very pleased with this little frame as this was my frist quadcopter build. Not only pleased with the product, but the wealth of information on this site through videos Hobbyking has done, and the discussions. I have just ordered the F450 frame and the electronics to start my 2nd build now that I've got my first under my belt.

The frame is pretty solid and the arms have little flex for me. Running 1400kv 28mm motors, 25A ESCs, 3-4 cell lipo, and a Multiwii flight controller. This thing is very fast and pretty tough. I've had a few crashes and yet to have an issue. The top plate will need to be drilled for a 30.5mm board or you can buy an adapter board and drill it. If you do this you can put a large battery in the bottom tray and fly for a while. This guy does sit low to the ground as well, do not plan to put the battery underneath without modification. Great buy, definitely would again.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The frame is pretty solid and the arms have little flex for me. Running 1400kv 28mm motors, 25A ESCs, 3-4 cell lipo, and a Multiwii flight controller. This thing is very fast and pretty tough. I've had a few crashes and yet to have an issue. The top plate will need to be drilled for a 30.5mm board or you can buy an adapter board and drill it. If you do this you can put a large battery in the bottom tray and fly for a while. This guy does sit low to the ground as well, do not plan to put the battery underneath without modification. Great buy, definitely would again.

was a little surprised that its so brittle one crash snapped a leg it is cold here was very disappointed if you buy one get two for spare legs

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

was a little surprised that its so brittle one crash snapped a leg it is cold here was very disappointed if you buy one get two for spare legs

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 7
Customer files
F330 with 450 heli landig skids Download [1940]
F330 KK2.0 Download [1960]
F330 DeadSquirrel FPV Download [1710]
F3330 DeadSquirrel bottom Download [628]
F330 DeadSquirrel FPV side Download [1222]
Miniquad Photo Download [592]
F330 frame for anti-vibration Download [1147]
330 built Download [1450]
f330 w/naze32 Download [542]
f330 w/naze32 Download [493]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save