Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Focke Wulf FW-190A Balsa .46 dimensioni GP / EP 1500 millimetri (ARF)

Generating Links

Focke Wulf FW-190A Balsa .46 dimensioni GP / EP 1500 millimetri (ARF)

Prezzo:

Now save risparmia 0,00 € 0,00 €

154,53 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
341000071-0
Spedizione gratuita? Clicca qui per saperne di più!

Sarebbe giusto dire che il Focke Wulf FW-190 è venuto come uno shock per piloti alleati quando introdotto in servizio nell'agosto 1941; anzi, asso britannico Douglas Bader ha scritto tanto nel suo libro "Lotta per il cielo."

Armati fino ai denti con 4 x 20 mm cannoni e 2 mitragliatrici x 13mm, il "Macellaio uccello", come il FW-190A è stato conosciuto, consegnato un enorme pugno di quelle che rientrano nei suoi monumenti e surclassato lo Spitfire Vb (il principale caccia inglese in quel momento ) in tutte le aree ad eccezione di raggio di curva ad altitudini inferiori a 20.000 ft.

Con una velocità massima di 408 mph a 19,400ft e un rateo di salita di circa 3.000 piedi / min FW-190A ha mantenuto la sua superiorità rispetto caccia alleati fino all'introduzione del Spitfire Mk IX con la sua più potente motore Merlin 61 e 2 stadio compressore restaurato l'equilibrio durante l'estate del 1942.
Il FW-190 ha visto l'azione sul fronte orientale dalla fine del 1942, dove ha trovato il favore con i suoi piloti che hanno utilizzato in entrambi i ruoli da caccia e attacco al suolo.

Il nostro "Butcher Bird" viene quasi pronto a volare con assemblaggio finale e l'installazione solo attrezzature necessarie. La struttura del velivolo tutto balsa è abbastanza forte per fare un motore di nitro, ma è abbastanza leggero per la conversione elettrica. ingranaggio robusto fisso coda atterraggio dragger è grande per i campi in erba più ruvida, anche se è un lavoro semplice per aggiungere una serie di ritrae. Questo modello è dotato di un pacchetto molto completo hardware tra cui aste, corna di controllo, serbatoio del carburante, montare il motore, e anche un filatore di plastica.

Per aggiungere al realismo di scala, la copertura è un film plastico di colore più, semi finitura opaca con la linea di pannelli stampati, dettagli rivetti ed effetti atmosferici realistici anche applicate! Un ampio, cappuccio preverniciata in fibra di vetro viene fornito per finire questo grande dall'aspetto sportivo / modello in scala e un grande, ma portello di accesso ben mascherata permette la sostituzione delle batterie veloci tra le sortite.

Battenti FW-190 è un piacere grazie al suo carico leggero ala e la sezione ala raffinato che è stato sviluppato per dare caratteristiche di stallo più miti che si trova spesso con warbirds scala e renderlo un lavoro semplice per cadere in una serie di ritrae per pulirlo per qualche adrenalina basso e veloce bombardamento corre, tirando in un rotolo vittoria alla fine del campo.

Caratteristiche:
• Quasi pronto a volare - assemblaggio finale completa, installare la vostra scelta di elettronica e sistema di alimentazione
• balsa leggera e la costruzione del compensato
• Include attrezzi fissi, ritrattare pronto
• altamente dettagliate stampata rivestimento multi-colore
• boccaporto magnetico per serbatoio o di accesso alla batteria
• cappuccio in fibra di vetro preverniciato
• pacchetto hardware completo comprende filatore

Specifiche:
Apertura alare: 1.500 millimetri
Lunghezza: 1.090 millimetri
Peso di volo: 2700g

Richiede:
4/5 trasmettitore e ricevitore Canale
.46 A due tempi / .70 motore a quattro tempi o .46 Equiv
5 x servi standard
batteria del ricevitore (bagliore)
800W motore / ESC / batteria (elettrica)
ritrae elettrici

  • Apertura alare ( mm ) 1500.00
Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Robert | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jul 30, 2016

I have had this kit (although its an ARF it needs quite a bit of work before it can fly) for a few weeks and am well into the setup. Initial impressions are really good - very well and strongly made (if a bit heavy) with printed plastic covering. The pilot and cockpit are excellent. It comes with a comprehensive set of a accessories - all the pushrods, hinges, servo mounts etc. I am doing mine electric and I reckon all up weight will be about 2.7kg (I weighed all the components). It took a while to get retracts that will fit but have eventually settled on electric retracts with a socket for 5mm pins and have cut down the supplied fixed u/c legs and put a tube sleeve around the end that fits in the retract as the wire is 4mm diameter. I also hope to install a hobby king sound system in this plane. The battery bay is big enough for a 5s 3000mAh battery but not my 5000mAh ones so I hope flight duration will not be a problem. I will add to this review once it flies.

Rizwan | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jun 11, 2016

I am starting this thread because I just received my FW-190.
Good packaging arrived in one piece.
Model is covered in some plastic covering (I think its called KH Misticker). Mat finish and beautifully detailed.
I am planning to put EVO10 gas on this model. I used EVO10 engine on WorldModels FW190 and it works perfectly.

Over the course of several weeks I will continue to post pics and finally video...stay tuned

solentlife | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

May 22, 2016

OK ... kit arrived in very good condition ... double boxed. Its the VQ FW kit.
All goes together well ... BUT - the firewall marks are difficult to find, and motor mount once fitted as per instructions - shaft end is out of centre. The mount needs to be moved a small amount more to left so that right thrust angle puts shaft end at centre.
Cowl does not slide over fuselage end and only butts up to it.
Fixed wheel blocks are laminated from multiple ply sheets and these split apart when landing or any shock. The L of the landing gear then impacts wing top sheeting.
The wing is non-scale as most of the aircraft but overall it looks the part in the air. The photo of her gives impression of a semi gloss finish but in fact she is much better looking in reality.
The covering film is not like normal film - it is more self-adhesive and thicker. They give you A4 sheets of each colour as spare repair film if needed.

I have fitted an OS 70FL 4str and this powers the model excellently, along with 12x6 prop. Balance is spot on with this.
I am now awaiting the retracts to replace the fixed gear. I chose the plain retract units shown in accs. links and will use the fixed gear in them with top L cut of.

For anyone who wants a FW190 and not too worried about scale accuracy - this is a good model.

See my youtube channel 'solentlifeuk' for video.

Carlo | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Apr 30, 2016

I ordered one, the aircraft is well done and i like the colors and the age effect on the wing skin. The push pull rods are metallic so too havy for my point of view. I think i will replace them with a plastic cable to save same weith.

Moppi | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Apr 23, 2016

My FW-190 came well packed & protected. Weight of all parts in the box totals 2.270g. The hardware pack and push roads alone put 760g on the scale. It might be possible to save some weight here later while putting the model together.

Nathan | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Mar 14, 2016

Very nice all wood constructing even fuselage is round like the original. Plane is stand off scale, but one of the best flying FW-190's I have ever owned. Flying with a 4250-750 brushless motor 14x7 APC e prop and 5000 4 cell Hobby King Zippy pack lipo. 9 minute flights depending on throttle management. Installed retracts had to modified the battery opening a little for the larger pack. Same VQ model FW-190 from a few years back see Model Airplane new reviews. http://www.modelairplanenews.com/blog/2012/12/12/vq-models-focke-wulf-fw-190-video/

pejay | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jan 02, 2016

Just received the plane and it is a great looking bird with many nice details. Much better looking than shown on the pictures here, Fantastic value for the money, even when you add the shipping cost. It is a VQ model and has a very good manual. All parts like motor mount are top quality. I bought the servoless retracts with shock absorbing oleo legs - fits very well. Came with 4 guns but only one is needed to fit on top of cowling - not shown on the pictures here. I am sure it will fly very well - only pity it does not have flaps

File dei clienti
FW Manual Download [1201]
FW-190-2 Download [1987]
FW-190 Download [2325]
FW-190 Download [2173]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!

Related Tags

Accessori