New Items Notizie Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

FPV250LH bassa Hung Clean-and-dirty (KIT)

FPV250LH bassa Hung Clean-and-dirty (KIT)

Shipped From:
  • Global
QTY:

Now save risparmia 6,14 € 6,14 €

Special Price 12,45 € 12,45 €

You save risparmia 6,14 € 6,14 €

Was  18,59 €

Stato:
Disponibile
SKU:
366000015-0
WANT FREE SHIPPING? Click here to find out more!

Il FPV250LH (Low Hung) è un FPV mini dimensioni quadcopter misura in in una mera 250 mm. Questa piattaforma FPV multi-rotore resistente, economico è perfetto per le corse FPV o percorso ad ostacoli che vola al vostro campo locale. Il monte basso telaio è un must have 250 quadcopter offrendo più spazio e le opzioni di configurazione e di un sistema di isolamento delle vibrazioni pulito e sporco per parco urla uso FPV.

La bassa appeso versione Frame ha una precisione secondario CNC taglio telaio Tri-stacked, abbinato con calde distanziatori in alluminio anodizzato rosso. Il telaio ha 8 ditali vibrazione per l'isolamento e un nuovo lungimirante fotocamera FPV montano tra i fotogrammi. La baia controllore di volo è ancora completamente accessibile di effettuare qualsiasi tipo di layout mal di testa libera. Il kit Low Hung è un basso profilo della macchina ostacolo abbracciare elegante.

Il telaio di base è una cornice modanata vetro riempito un pezzo di nylon ed è estremamente resistente, dando la fiducia necessaria per andare FPV barnstorming eppure pesa solo 110 grammi (160g opzione L con). La piattaforma anteriore è stata progettata per gestire fino a una padella 2 servo e inclinare l'installazione della telecamera e la piattaforma posteriore sostiene il trasmettitore video, per tenere tutto bello ed equilibrato. Il FPV250 ha una baia centro, abbastanza grande per i controllori di volo più popolari e comprende una gabbia superiore per la protezione incidente. Ci sono quattro slot cinghia integrati sul fondo per tenere saldamente la batteria in posizione per alta manovre G. I FPV250 supporti del motore in grado di gestire qualsiasi cosa, da 1506 a 2208 motori e le braccia ventilati fornire un sacco di raffreddamento per il 7 ~ 12A CES.

Il Dipartimento Funzione FPV250LH è un bilancio mentalità FPV basher, pronto per ostacoli temerario o Spec Classe FPV corsa. È il momento di iniziare a praticare le tue abilità di FPV, stagione di gara si sta preparando per iniziare!

Caratteristiche:
• Costruzione pieno di un pezzo di vetro per una maggiore durata
• grande gabbia 55x55mm volo protetta baia di controllo
• Ampia gamma di opzioni a Motore
• carrello di atterraggio rimovibile
• Grande cornice di isolamento delle vibrazioni secondaria per più spazio e il layout più facile
• Design a basso profilo

Specifiche:
Passo: 250mm
Peso: 180g
Altezza: 63 millimetri con il carrello di atterraggio e la gabbia centro

richiesto:
4 x Motors 1506 ~ 2208
1 x 1300mAh 2200mAh 11.1V-(3S Lipoly)
4 x eliche fino a 6in
4 x del CES 7 ~ 12A
1 x regolatore di volo del Multi-rotore
Radio 4 canali (6 canali consigliato per FPV e l'uso FC)
ingranaggio FPV (opzionale)

  • SKU 366000015-0
  • Brand Other
  • Capacità ( mAh ) -
  • Peso 236.0000
  • Lunghezza 270.00
  • Packaging Width 160.00
  • Altezza 240.00
  • FPV250 Low Hung
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Good frame for the price, excellent cable management. might not be the strongest frame but i can take a few hits before anything happens so get 2pcs just to be safe on spare parts so you can always fly. Only thing to note is the frame weight its NOT 180g its total 200g - 1g with everything mounted.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good frame for the price, excellent cable management. might not be the strongest frame but i can take a few hits before anything happens so get 2pcs just to be safe on spare parts so you can always fly. Only thing to note is the frame weight its NOT 180g its total 200g - 1g with everything mounted.

Bought this as my first quadcopter frame, broke it on my first flight. The frame is very weak and using dal indestructible props did not help. On the crash I broke one arm and destroyed every single anti-vibration spacer.

If you want a frame that will last you are better off spending the money to get a nice strong carbon fiber frame.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought this as my first quadcopter frame, broke it on my first flight. The frame is very weak and using dal indestructible props did not help. On the crash I broke one arm and destroyed every single anti-vibration spacer.

If you want a frame that will last you are better off spending the money to get a nice strong carbon fiber frame.

Kit quit good, vertical camera mount fits really tight into frame and neds little work or banging to fit but nothing serious,dont use turnigy hex tools on assembly they will twist the little sloppy soft heads on the hex srews, it even comes with 4 clear pretty hard proppelers wich lookes like to be 5x3,for the price i have to give it max rating of 5 stars

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Kit quit good, vertical camera mount fits really tight into frame and neds little work or banging to fit but nothing serious,dont use turnigy hex tools on assembly they will twist the little sloppy soft heads on the hex srews, it even comes with 4 clear pretty hard proppelers wich lookes like to be 5x3,for the price i have to give it max rating of 5 stars

Very good product. Came clean.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good product. Came clean.

Seems to be of reasonable build quality. However, like others, I received an incomplete kit with only 2 of the three frame plates required.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Seems to be of reasonable build quality. However, like others, I received an incomplete kit with only 2 of the three frame plates required.

I really like this frame. Pretty cheap and can be configured in a couple of different ways.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I really like this frame. Pretty cheap and can be configured in a couple of different ways.

Lger et solide ce chssis est top pour du racing fpv. je l utilise avec des moteurs 2206 baby beast \kk2.19\3s 2200mah .

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Lger et solide ce chssis est top pour du racing fpv. je l utilise avec des moteurs 2206 baby beast \kk2.19\3s 2200mah .

Not impressed. The Clean- Dirty plates will come apart for no reason.This has caused me to crash. I had to zip tie the plates together just to fly. This made the clean-dirty plates useless. The arms are not replaceable. After crashing three times because of the clean-dirty plates 3 of the arms broke and one of the motors... So basically if you are the kind of pilot like me that likes to bang around,challenge yourself, and have a good time flying under and through trees this is not the Quad for you. Get something that can be fixed. After this experience I scratch build a quad form light plywood and 1/2 inch dowel rods. I can crash my $5 airframe and field repair very quickly. Im sorry Hobbyking, I love you guy and what you have done for the hobby, but this is one of the only products I have bought that I will never recommend.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Not impressed. The Clean- Dirty plates will come apart for no reason.This has caused me to crash. I had to zip tie the plates together just to fly. This made the clean-dirty plates useless. The arms are not replaceable. After crashing three times because of the clean-dirty plates 3 of the arms broke and one of the motors... So basically if you are the kind of pilot like me that likes to bang around,challenge yourself, and have a good time flying under and through trees this is not the Quad for you. Get something that can be fixed. After this experience I scratch build a quad form light plywood and 1/2 inch dowel rods. I can crash my $5 airframe and field repair very quickly. Im sorry Hobbyking, I love you guy and what you have done for the hobby, but this is one of the only products I have bought that I will never recommend.

Great price for a very complete FPV250 kit. This is my second build and I'm quite pleased with the quality.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great price for a very complete FPV250 kit. This is my second build and I'm quite pleased with the quality.

strong frame. glue the legs. add 5mm m3 spacers to fit a gopro in the cage. I replaced 4 dampeners with the stronger pink ones. Put zip ties loosely through every dampening ball or you'll be looking for the bottom half of your frame after a crash

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

strong frame. glue the legs. add 5mm m3 spacers to fit a gopro in the cage. I replaced 4 dampeners with the stronger pink ones. Put zip ties loosely through every dampening ball or you'll be looking for the bottom half of your frame after a crash

  1. 1
  2. 2
  3. 3
Customer files
5mm nylon spacers = gopro fit Download [2528]
FPV250 Instruction Manual 2 Download [89]
FPV250 Instruction Manual 1 Download [93]
No File Name Download [170]
Frame Shocks Download [260]
Frame Cage Mount - Top Download [294]
Frame Cage Mount - Underside Download [222]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking