Registrati

Product Finder

Impostazioni

Useful links

Chat dal vivo
 
[["US","AU","GB","DE"]]
Registrati

FPVRaptor Composite 1.600 millimetri (PNF)

FPVRaptor Composite 1.600 millimetri (PNF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
2579 g
SKU:
FPVRAP1600

Combine

essential items and
battery
acc
Descrizione
prodotto

Il FPVRaptor è una piattaforma interessante e superbamente progettata FPV con aa serie di caratteristiche pulito che fanno di questo modello uno dei migliori nella sua categoria.

Per robustezza e affidabilità, il modello è dotato di una fusoliera modellato colpo che utilizza nylon ed è praticamente indistruttibile, le superfici volanti sono tutti realizzati in schiuma dura EPO. Dal punto di vista della praticità, le ali sono plug-in e il modello non richiede colla per il montaggio, tutto semplicemente viti insieme. Il baldacchino esterno è puramente per gli sguardi e viene utilizzato quando il FPVRaptor è volato come un aliante, sganciarlo in secondi per rivelare una piattaforma pronta macchina fotografica, con tanto di servo pan / tilt buco che è stato pre-stampato di montaggio. Questo grande copertura della macchina fotografica della piattaforma / ala è garantito da un dispositivo di chiusura a sgancio rapido e una volta rimosso, svela zona enorme baldacchino per le batterie e le attrezzature FPV montaggio su un piatto strati pre-montato. Tutti i servo del motore, e ESC sono ovviamente pre-installato.

La spina ali hanno modanature per aggiungere lembi se desiderato e vi è anche un C modellato indicatore G sul lato inferiore dell'ala per i controlli pre-volo rapidi. Non c'è dubbio che questo è un superbamente progettata, modello FPV di alta qualità ad un prezzo eccellente. Sarebbe giusto dire che è più interessante da guardare che la maggior parte delle piattaforme di FPV, per non parlare molto più dura, il FPVRaptor darà le ore RC pilota di divertimento per molti anni a venire!

Spec:
Apertura alare: 1.600 millimetri
Lunghezza: 1.044 millimetri
Peso di volo: 950g
Motore: 2812 brushless Outrunner 1400kv
ESC: 30A w / BEC
Servo: 9g x 4

include:
tutto Hardware
istruzione
Prop & Spinner
Cacciavite

Richiede:
Tuo 4 canali TX / RX
1800mAh 3S Lipoly Batteria
FPV sistema

Product
Specifications

Ulteriori informazioni

  • SKU:
    FPVRAP1600
  • Brand:
    N/A
  • Peso (g)
    2579.00
  • Lunghezza
    1050.00
  • Larghezza:
    180.00
  • Altezza:
    240.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
i love this plane, it does have its flaws, stickers were hard to put on, prop vibrates, but for $70 i think it is great with the stock motor it can carry a 5000mah 3s with ease, amazing flight times with 5000mah i got over an hour of flight. there is so much room i have carried fpv gear 2 gopros (one in case) and a 5100mah 3s and it flew take off was a struggle but to my surprise it still climbed decently i love this plane
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great airplane, put together in 4 hours.
Replaced the stock servos for 4 new Corona DS-919MG and used two stock servos for the flaps.
Replaced the stock ESC it just looks cheap and I do not trust it . Note:Please use a filler ring between the spinner plate and the stock propeller otherwise the propeller is pushing the back-plate out out of shape cousin big vibrations in the motor mount and airframe when the motor spins the propeller. Plane is gentle on the sticks can go fly fast but also very slow even without flaps. With a 3cells Zippy 4000mA it will stay up easily for 20 minutes. Not yet any FPV gear attached. Great plane for the right price. 5 Stars
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great airplane, put together in 4 hours.

Replaced the stock servos for 4 new Corona DS-919MG used two stock servos for the flaps.

Replaced the stock ESC it just looks cheap and I do not trust it . Note:Please use a filler ring between the spinner plate and the stock propeller otherwise the propeller is pushing the back-plate out out of shape cousin big vibrations in the motor mount and airframe when the motor spins the propeller. Plane is gentle on the sticks can go fly fast but also very slow even without flaps. With a 3cells Zippy 4000mA it will stay up easily for 20 minutes. Not yet any FPV gear attached. Great plane for the right price. 5 Stars
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Mon fpvraptor a vol dans la configuration dcrite. Malgr le poids la puissance est trs suffisante avec un taux de monte d'environ 5m/s. Il faut le lancer vigoureusement avec une bonne pente de monte car il manque de cabreur moteur pour le dpart. L'approche et l'atterrissage sont trs sains malgr un vent tourbillonnant lors de l'essai. En respectant le centrage il est trs sain et homogne. J'ai ralis 2 vols: le premier avec la bulle et le suivant avec la camra hobbyking et je n'ai pas remarqu de diffrence dans le vol. J'ai fait des montes de 15 20 s avec le moteur fond et je n'ai pas constat d'anomalie. Le esc reste presque froid et le moteur peine tide. Aucun souci du ct des servos qui sont trs prcis et rapides. Rapport qualit prix difficile galer!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Aprs plusieurs essais au banc les quipements d'origine fonctionnent parfaitement. Cependant au vu de tous les commentaires ngatifs propos de l'esc, j'ai rajout un accu 2s avec un bec perso pour alimenter la rception par scurit. De plus le poids de cet accu s'est avr ncessaire pour assurer un centrage correct, et le poids final est de 1280g sans aucun quipement vido ou fpv. Les essais en vol sont imminents et je ferai part de mes analyses.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Livraison trs rapide en France partir de la Hollande. Trs bon rapport qualit prix. Seule la fixation d'aile est peu pratique car le dmontage s'impose pour le transport. Les dcalcomanies sont peu faciles poser et ont tendance se dcoller sur les arrondis de bord d'attaque. Pour l'instant il est quip de son esc d'origine ainsi que des servos qui semblent bien fonctionner. Tout mont avec un lipo 3s 2200 il affiche 1200 g (loin des 950g annoncs!) et il faut ajouter 70g pour un centrage correct, ce qui correspond une camra.
Pour ce qui est de la propulsion il est quip d'origine d'une hlice 8x4 qui tourne 10800 rpm sous 13.8 ah au sol. Ce qui m'tonne un peu ce sont tous les commentaires ngatifs propos de l'esc car avec 30 A il semble largement dimensionn. Cependant je vais prolonger les essais au sol afin de m'assurer de la tenue de tous les lments avant de le propulser dans son lment.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
es un bon avio..indicat per fpv. te una bodega molt ampla. el faig volar amb una 3s. de 2650. el centre de gravetat amb la bat, la camara, gps i l'emisor es perfecte.. els kwilinks son una merda i fan por...montatge molt rapid. en 2 hores el tens montat. apart l'electronica clar. el motor tira de sobres. no fa falta cambiar'lo. el variador cap problema.
no s'escalfa. molt maniobrable. un bon avio encara que sembli de mira i no em toquis.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The FPV Raptor is quite a value, even if it didn't come equipped with motor, esc, servos. I added flap servos and covered the wings, fin/rudder and stab/elevator with Econokote using a low heat iron. I have found this is a best practice with foam parts. Using the stock setup with a 2200mah 3s zippy lipo - the ESC got VERY hot and motor is under powered. Once in the air its not so bad, it flies very nicely, very forgiving, easy to control and no bad habits. I replaced the motor and esc with my own proven mix of a BP Cheetah 2217/4 2200kv motor which bolted right over the existing motor mount, a BP 40A ESC, a Castle 10A BEC set to 6v, and an APC 7x5e prop. I got some flack from all the old fart scale dudes for bringing some plasticky foam thing. That is until I belly take off on our grass runway with a GoPro bolted to the camera mount w/ 2 3300 3s Zippy in parallel in the fuse. On my third day out I was the only one at the field as it was VERY windy. I added my FeiYu Tech_FY-31AP Flight Stabilization System to prepare for FPV stuff. With Heavy wind, gusts of 25mph , it held a track in the sky perfectly. What a great platform. With all the space in the PVC fuse, its perfect. Even better is the black canopy that can be snapped over everything when you just want to fart around at the field and see how long you can stay aloft.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought this from international warehouse. Of course its now in stock at USA warehouse. Value at 4 because I replaced stock motor and esc. Quality at 4 because the wing mount is weird where nylon bolts would have been better. Regardless, the FPV Raptor is quite a value, even if it didnt come equipped with motor, esc, servos. I added flap servos and covered the wings, fin/rudder and stab/elevator with lightweight Econokote using a low heat iron. This gave the wings more rigidity and saves them from the occasional oops that foam parts often encounter. I have found this is a best practice with foam parts. Using the stock setup had a maiden with a 2200mah 3s zippy lipo. Two things happened, the ESC got VERY hot and the craft as a whole is under powered. Once in the air its not so bad, it flies very nicely, very forgiving, easy to control and no bad habits to speak of, just kind of scary with a hand launch and barely clearing the barbed wire fence at the end of the runway. I removed the motor and esc and added my own proven mix of a BP Cheetah 2217/4 2200kv motor (which require no modifications and bolted right over the existing motor bolt pattern), a BP 40A ESC, a Castle 10A BEC set to 6v to power my receiver and six servos, and am flying with an APC 7x5e prop. Note on the prop, make sure the text on the prop faces the front of the airplane and you are all set.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ottimo aereo da attrezzare fpv! Ottimo anche per i principianti che vogliono imparare.La fuso molto resistente e perdona crash in fase d'atterraggio (smusate),ma altrettanto difficoltoso ripararlo se si rompe.

Doti di volo buone,paragonabili alle pari categorie. Da sostituire esc e servi.I flaps non servono a una mazza.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Combine

essential items and
battery
acc

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.