- Descrizione
prodotto -
Progettato per solo i piani, di H-RE ESC 'sono una scelta eccellente per qualsiasi piano che richiede lineare, risposta dell'acceleratore tagliente e affidabile su un esc 35A.regolatori di velocità H-KING hanno rigoroso test di fine linea di controllo di qualità e sono SMT (Pick-n-Place) nella stessa stanza come la saldatura foro passante (fili, condensatore) e l'imballaggio è fatto. Migliorare la qualità e ridurre la contaminazione e incongruenze dovute al trasporto.
L'H-RE 35A include un XT-60 e le spine oro da 3,5 mm pre-saldato, più per rendere ancora più facile viene pre set-up con le impostazioni LiPo e la rilevazione delle cellule Auto.
Il regolatore di velocità H-RE include una 2A BEC (Battery Elminator Circuit) per alimentare il ricevitore, non c'è bisogno di avere una batteria ricevitore separato.
La gamma H-RE del CES 'sono sia economiche ed affidabili, oltre che don''t bisogno di alcuna installazione o saldatura. Basta inserire la spina e volare!
Spec base.
Valutazione Amp: 35A
Tasso di Burst (15sec): 42A
BEC corrente: 2A, 5V (Linear)
Tensione: (2-4 celle Lipo)
Dimensioni: 38x28x16
Peso: 32g
- Product
Specifications -
Ulteriori informazioni
-
SKU:
HKESC35A
-
Brand:
H-King
-
Peso (g)
77.00
-
Lunghezza
180.00
-
Larghezza:
18.00
-
Altezza:
90.00
-
SKU:
- Community
Discussions -
- Rate&
Review -
Can only confirm what most of the others wrote. ESC continously beeping after connected to prog card... no way to reset it. At least I have not found one.
That one is going into the bin. what a waste of time and money :(On the bright side, This ESC worked right out of the box with my AR6400 receiver, after the problem below happened, the replacement Castle ESC gave me a voltage lockout. (So kudos there, no need to be re-flashed) On the darker side, Solder Joints are week, and the receiver leads started coming loose after just one flight. That whole area is covered in glue, so a re-solder was not possible. I just chucked the components, and harvested the wires for other projects in the end.This is my favorite ESC. While the wires are a little small, It works.Once again Hobby King delivers outstanding product at an outstanding price. My favorite part about this speed controller is that the instructions they include for programming (provided the factory settings are not correct) are actually very easy to follow and very clear.Nice controller, put it in a radjet 800 works well on a 3s 2200mahThis series of esc have proven to me to be as reliable as others costing 2 to 3 times more. I wish HK made a 70 and 100 amp. as well.Great esc have been using these in park fly stuff and Tek sumo for over a year and all perform faultlessly and there a great price.Un controleur de qualit suprieure,fonctionne trs bien,complet .I have flown with this is ESC so many times, I've lost count. I'm pulling 25 amps with my HK Walrus glider and the ESC's performance is rock solid. After 20 - 30 minutes of flight with some vertical climb runs for 10 seconds, it's warm to the touch.
I wouldn't recommend for anything over 30 amps. Lower than that you're good to go.Sorry to say but this is a bad product!
I just programmed the brake and it won't stop beeping.
No reset options, no factory defaults.
Can't claim warranty because I needed to change the battery connector to fit my battery. So browse away from this product while you can!
This product is a waste of your money. - Upload
Videos - Upload
Files -
Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!
file di clientiH-KING 35A Manual Scaricare ora [756kb] HKESC Manual Scaricare ora [938kb] Twin 35A HK ESC Scaricare ora [183kb]
- acc
Combine
essential items and
Prodotti Correlati
