Spettacolo : TUTTE LE CATEGORIE 0 Velivoli 1921 Aerei 1086 Tutti gli Aerei 145

H-King Glue-N-Go Dolphin EPP 800mm (Kit)

H-King Glue-N-Go Dolphin EPP 800mm (Kit) - rear

H-King Glue-N-Go Dolphin EPP 800mm (Kit) - front

H-King Glue-N-Go Dolphin EPP 800mm (Kit)

14 Revisione

Prezzo:

Now save risparmia 0,00 € 0,00 €

18,13 €

Già acquistato Discontinued Product

Please continue searching for a similar product.

Spedizione gratuita per ordini idonei

SKU:

9700000023-0

Spedizione gratuita? Clicca qui per saperne di più!

Condividi questo prodotto e guadagna 94 punti (0,91 €) [ ? ]

Descrizione del prodotto

The H-King range of Glue-N-Go foamboard and EPP kits makes for flying fun with a huge range of different planes (and other flying objects). They are easy to assemble, easy to fly, and exceptional value!

What better way to get the kids involved with flying than with this superbly flying dolphin. It will make a huge impact at your local park.

This Dolphin is made from tough EPP foam reinforced with carbon fiber rods to take those little bumps and hard landings. The foam is CNC cut for a perfect fit.

The easy to follow color instructions will have the model built in no time. All you need to add is your choice of electronics. All it needs is some servos, a motor, ESC, your receiver, and a 3S pack.

Just keep a lookout for other animals and enjoy.

Features:
• Kit version - Easy assembly and install your choice of electronics
• All hardware accessories included in the kit
• Requires all electronics (motor, ESC, servos, propeller, battery, radio gear)
• Durable 9mm EPP material laser cut and with realistic printing
• Stable flyer
• Carbon fiber reinforced

Specs:
Length: 860mm
Wingspan: 800mm
Weight: 190g (without equipment or battery)

Requires (Recommended):
1 x 2206 – 2212 1400KV – 2600KV brushless motor
1 x 12-40A ESC
1 x 500 - 1300mAh 3S LiPoly battery
1 x 6x4 or 8x6 propeller
4 x 9g servos
1 x 4CH or more Radio TX and RX

Specifiche del prodotto

IC / 2 : Elec Electric
Apertura alare ( mm ) 800.00
Length(mm) 860.00

Video

Carica video

Registrati per caricare video, per favore accedi o registrati

Discutere 0

Temi

Ordina per

Argomenti più recenti

Pubblica un nuovo argomento

Revisione

Registrati per scrivere recensioni, per favore accedi o registrati

arjan | Acquirente verificato

Overall
Quality
Value

it flies difficult

Dec 13, 2020

It is not an easy flyer. due to the big vertical surface it tumbles easily. wing area and vertical area are almost the same, so ending up with 4 wings. but it is just for fun. it lands always on the nose, so tape it in.

Gagi | Acquirente verificato

Overall
Quality
Value

Very cheap kit

Aug 17, 2020

It looks good, but it flies terrible!

Michael | Acquirente verificato

Overall
Quality
Value

Very fun

Jul 29, 2020

I picked this dolphin up to throw some old gear into for dirt cheap. I was amazed on how well it flys. I have a 2205 2300kv motor with a 30amp esc and using a bullnose 6045 with 1000mah-1200 3S batteries. Had to add 1oz weight as batteries are too light. Balanced from the middle of the propeller opening to the front edge. It doesn't like ailerons very much, I just use rudder mainly for control. It flys so stable and slow I can hover it around and buzz around within 1ft of obstacles and fly under carports lol. Only complaint would be how much the foam stinks if you leave it in your car and the nose of the dolphin breaks easy as it lands on it. I also didn't use the CF support rods, it seems sturdy enough with the CF glued into the slits of the plane itself. I actually cut the long one to use in the frame. The foam is brittle if you smack into things though. Highly recommend for the price and fun.

Kenster | Acquirente verificato

Overall
Quality
Value

Just for Fun

Jun 18, 2020

DIY build kit has lots of carbon fiber supports control horns, linkage rods and screw connections. Assembly is a bit difficult due to all the carbon rods linking top and bottom half together while inserting the wing and trying to keep everything straight and at 90 degrees from one another, two tables side by side works well along with several jugs of water as weights to ensure flatness as glue dries. Should be a fun 3D plane slow flyer with lots of surface area for knife edge and oversized control surfaces. Powering this with 2212 1400kv on 3s lipo with 8x6x3 blade prop should hover with no problem.

Twiggy | Acquirente verificato

Overall
Quality
Value

Good

Jun 09, 2020

Went together well was very hard to control in the air so I reduced the side area by cutting 60mm off the top and bottom keeping the same shape. Give the wing a few degrees of dihedral and made it rudder elevator control only.
It now flies quite well.
Over all quite a challenge but good quality.

Good | Acquirente verificato