Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

H550 V1 fibra di vetro Hexcopter 550 millimetri telaio

Generating Links

H550 V1 fibra di vetro Hexcopter 550 millimetri telaio

Prezzo:

Now save risparmia 0,00 € 0,00 €

20,66 €
Spedito da:
  • USA
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
297000030-0
Spedizione gratuita? Clicca qui per saperne di più!

L'H550 V1 è un telaio 550 millimetri hexcopter ben pensato costruito con materiali di qualità. Il telaio principale è la fibra di vetro, mentre i bracci sono costruiti in poliammide nylon ultra resistente.

Il montaggio è un gioco da ragazzi con le maniche in ottone pre-threaded per tutti i bulloni del telaio, quindi non sono necessari dadi di bloccaggio. Esso utilizza una dimensione del bullone per l'intera costruzione, rendendo l'hardware molto facile da mantenere in ordine e richiede solo una dimensione della chiave esagonale da assemblare.

La capacità di sollevamento aggiunto di una configurazione esagonale rende questa cornice ideale per trasportare carichi più grandi come sistemi di telecamere e altri componenti elettronici. Questo rende per una piattaforma fotocamera eccezionale o semplicemente una struttura multi-rotore molto agile e potente per acrobazie!

L'H550 dispone anche di armi colorate (3 bianchi e 3 rossi) che sono grandi per l'orientamento. Aiuta a mantenere volare nella direzione giusta senza la necessità di diversi oggetti di scena colorate.

Offriamo una linea completa di elettronica multi-rotore come il controllo multi-rotore di bordo, ESC e motori. Non è mai stato più facile o più conveniente per ottenere un quad in aria!

Caratteristiche:
Costruito fibre di vetro di qualità e nylon poliammide.
Pre-threaded manicotti di ottone per tutte le viti telaio.
braccia colorate per l'orientamento per tenervi volare nella direzione giusta.
Grandi linguette di montaggio sulla piastra inferiore del telaio principale per un facile montaggio fotocamera.
Ideale per trasportare carichi più grandi come sistemi di telecamere e altri componenti elettronici.
Montaggio semplice.

Specifiche:
Larghezza: 550 millimetri
Altezza: 55mm
Peso: 460g (w / out elettronica)
Fori Motor Mount Bolt: 16 / 19mm

richiesto:
6 x 28mm 1000 ~ 1200KV (o dimensioni simili / kv)
6 x 15 ~ 25 Amp ESC
6 x 8x4 ~ 10x4.5 Prop (3CW & 3CCW)
1 x Dipartimento Funzione multi-rotore Control Board
1 x 2200 ~ 3000mAh 3S 11.1v Lipoly Batteria

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

PageDM | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 06, 2014

First thing I noticed out of the box is the arms are not bright red, they are maroon/purple and the white ones are more off-white, not that it really matters but definitely doesn't look as clean as the one pictured, this could be a one off run perhaps with bad colours. The arms seem a little flexible on the twist axis, would shouldn't be a show stopper if motors and props are balanced. Otherwise it fits together well, at first I thought the screw holes were not quite lined up but if you start all the screws before fully tightening it comes together really well. As with most HK hardware, if you have a good quality set of hex drivers and don't over tighten the screws are fine. The edges of plates are sharp and will cause problems with wires so best to sand those down a bit with a dremel or something and seal the edges with CA. After saying all of that we are talking about a mere $20 frame kit, which is amazing value when you think $20 bucks barely buys dinner these days. 4 stars instead of 5 only because the colours don't match :)

MrMarek | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jan 12, 2014

Nice Frame. The colours of the arms are not pretty, but for 20$ is that OK. Cheap and nice Frame for easy building of the Hexacopter.
I did and I'm happy with. Resistant plastic, low cost replacement ans compatibility to the 450 size quadframe. Some seconds Video of my copter here
<object width="300" height="169"><param name="movie" value="//www.youtube.com/v/l_3gYlmv8Rw?hl=de_DE&version=3"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="//www.youtube.com/v/l_3gYlmv8Rw?hl=de_DE&version=3" type="application/x-shockwave-flash" width="300" height="169" allowscriptaccess="always" allowfullscreen="true"></embed></object>

Mario | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Dec 03, 2013

In erster Linie ist es ein gutes Produkt.
Es erfllt Sinn und Zweck zu einem guten Preis.
ABER: In der Artikelbeschreibung sind die weien Arme wei und die roten Arme richtig ordentlich rot. Die Realitt sieht da leider anders aus. Die weien Arme sind traurig grulich und die roten Arme sind sehr dunkelbraun. Absolut hsslich kann man nur sagen!
Das sollte unbedigt gendert werden. Es kommt einem vor, als wrde alles aus willkrlich zusammengemischten Recyclingresten mit zu wenig Farbstoff bestehen.
Sehr enttuschend.

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 25, 2013

Very strong arms. I use it for spares in my dead cat.

Bakerman | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 13, 2013

good quality but the arms are brown and white!

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 20, 2013

Nice Frame, decent quality.

awsome1 | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 11, 2013

Cheap cheap cheap and easy to build and fairly rigid can put all your stuff in it and place the lipo on top

Evil Pusher | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 07, 2013

Kit from the europan warehouse was delievered whit brown arms. Perhaps it is an joke for german buyers (if you understand, what i mean) 8-)))) lol. The quality itself is acceptable, but not great - okay for the price

__HaKK | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 03, 2013

nice and cheap kit that does nto have too much flex, also good for spare arms as arms are not sold separately

lolo59 | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 30, 2013

quality is ok for the price nice for spare part in case of crash for 3D fly ^^

  1. 1
  2. 2
  3. 3
File dei clienti
brown arms Download [62]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!