Registrati

Product Finder

Impostazioni

Useful links

 
[["US","AU","GB","DE"]]
Registrati
Shipped From:
  • Global
  • USA

hexTronik DT750 Brushless Outrunner 750KV

hexTronik DT750 Brushless Outrunner 750KV

QTY:

Now save risparmia 0,62 € 0,62 €

Special Price 10,91 € 10,91 €

You save risparmia 0,62 € 0,62 €

Was  11,53 €

Stock:
Peso:
79 g
SKU:
DT750

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descrizione
prodotto

L'apparenza inganna. Questo outrunner è circa due volte la dimensione di un motore campana towerpro e oscilla un puntello molto più grande. Il suo motore utilizzato su alcuni di Art-tech nuovi kit aereo, che è testiment alla sua durata, facilità d'uso e qualità.
Il DT700 oscillerà un 11x4.7 SF puntello bene, per la produzione di più di 900g di spinta.
La sua grande per foamies GWS più grandi o piani parkfly.

Spec.
Tensione richiesta: 11.1v
Capacità della batteria consigliata: 1300mAh +
Suggerita Prop: 11x3.8 o 11x4.7
Max assorbimento di corrente: 18A (con il puntello 11x4.7)
Spinta max: 1000g +
Corrente a vuoto: 1.4A
Albero: 4M (adatta perfettamente alla Towerpor / GWS SF puntelli lenta Fly)
Peso: 78g
Diametro: 41mm
Lunghezza totale: 77mm
Kv: 750rpm / v
Viene fornito con il supporto, come mostrato nella immagine

Rapporto di prova.
Abbiamo usato il outrunner DAT700 per alimentare l'una di Arte-tecnologia Pitts. Eseguire con un 1300mAh 3S1P 20C pacchetto, BESC 18A e 1147 GWS / Towerpro prop, le Pitts Art-tech correvano bene. Eccellente tasso di salita, anche se non hoverable, e con gli orari dei voli 13minute o più, siamo rimasti molto colpiti.
Un outrunner molto efficiente per lenti modelli volanti fino a .15 dimensioni.

Product
Specifications

Ulteriori informazioni

  • SKU:
    DT750
  • Brand:
    No
  • Peso (g)
    79.00
  • Lunghezza
    88.00
  • Larghezza:
    45.00
  • Altezza:
    51.00
  • Kv ( rpm / v )
    No
  • Correnti Max (A)
    No
  • Potenza ( W ):
    No
  • Lunghezza B ( mm ):
    No
  • Can Lunghezza D ( mm )
    No
  • Max Tensione (V )
    No
  • Albero A ( mm ):
    No
  • Unit Weight (g):
    78
  • Diametro C ( mm )
    No
  • Lunghezza totale E ( mm )
    No
  • Resistenza ( mh ):
    No
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Well, It spins, which is good.

The shaft is ridiculous but its easy to cut to length
Quality
Value
Overall
Quality
Value
Overall
A strong motor. Cut the shaft if you do not require the length. Make sure to wrap the motor in a plastic bag as small bits of metal will kill the motor if they get stuck to the magnets.
Quality
Value
Overall
Quality
Value
Overall
Good motor if you invest some time & money.
- needs balancing (all 6 I have bought)
- secure the wire with epoxy
- cut the shaft to the right size (a too long shaft gets bend easily)
- replace bearings (very important)

Use with 10,11,12 inch props. 12 inch needs 25 amp ESC.

I'm using them on an RCExporer Tricopter: Hover time about 25 mins. Flight time about 10 to 17 min depending how much full throttle.

Quality
Value
Overall
Quality
Value
Overall
Unbelievably efficient motors. Only requires a 20A ESC but delivers the lift.

Quality
Value
Overall
Quality
Value
Overall
Extremely good motor, especially for the price.There is one thing I dont like, and its the long motor shaft. I've only had one problem with this motor and its the E Clip on the bottom falling off in a crash, so remember to check if its firmly in place before you mount your motor. I recommend it!
Quality
Value
Overall
Quality
Value
Overall
Good motor, especially for the price. I dont like the long motor shafts though. I've had one proble with this motor, and thats the E clip on the bottom falling off, so just make sure its firmly in place before you mount your motor.
Quality
Value
Overall
Quality
Value
Overall
propellor batterie, amps&thrust

9055 carbon 3S/7,2A/530g 4S/11A/890g
Gemfan 9"x4.7 3S/9,8A/730g 4S/14,3A/1150g
10"x4.5 wood 3S/15,5A/900g 4S/22A/1300g
9"x4.5 3 blade 3S/15,5A/920g 4S/22A/1350g
Gemfan 10"x4.5 3S/15A/1050g 4S/22A/1500g
Gemfan 11"x4.7 3S/15A/1150g 4S/21A/1550g

Replace the tiny allen grubscrews in the mount with proper M3 allenbolts, so you can properly tighten them (use loctite) and won't lose your motor in midair!
Also use loctite on the grubscrew securing the motor shaft, or you might bind the bearings when tightening your prop on the shaft.
Quality
Value
Overall
Quality
Value
Overall
DT750 3S 4S

prop Amps thrust Amps thrust

9055 carbon 7,2 530 11 890

Gemfan 9"x4.7 9,8 730 14,3 1150

10"x4.5 wood 15,5 900 22 1300

9"x4.5 3 blade 15,5 920 22 1350

Gemfan 10"x4.5 15 1050 22 1500

Gemfan 11"x4.7 15 1150 21 1550

Quality
Value
Overall
Quality
Value
Overall
Great motor apart from the long shaft! But is very efficient in power and thrust. Great for large depron scratchbuilt slow flyers and works well on a RCExplorer tri!

Lacks punch but it is a low Kv motor after. However great thrust on 10 to 12inch props!
Quality
Value
Overall
Quality
Value
Overall
Lots of power to pull my home made foam board projects.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.