2.8kg Hitec HS-82MG Micro Metal Gear servo / 0.12sec / 19gPrendiamo un nostro servo di vendita superiore e renderlo ancora migliore. Basato sul popolare ultra HS-81mg l'HS-82MG ottiene un nuovo più forte motore ed elettronica aggiornata per la centratura più precisa. L'HS-82MG è perfetto per piccoli aerei ed elicotteri in cui è richiesto un geartrain durevole.
Tipo motore: 3 Pole
Tipo cuscinetto: Top cuscinetto a sfere
Velocità @ 4.8V: 0,12 sec @ 60 gradi.Velocità @ 6v: 0.10 sec @ 60 gradi.
Coppia @ 4.8V: 2.8 kg.cmCoppia @ 6v: 3.4 kg.cm
Dimensioni: 30 x 30 x 12mm
Velocità ( Sec / 60deg )
Coppia ( kg) ( min . 0.01kg )
Unit Weight (g):
A ( mm ):
B ( mm )
C ( mm )
D ( mm ):
E ( mm ):
( Mm ) F
Perfect analog servo my 1,5kg APM FPV Tricopter tail.These are poor, they do not run on a spektrum receiver power by a plush esc.. they fluctuated badly. I added a 5.1v align regulator between the esc and receiver then they stabilised. however they still do not centre very well.
this is an excellent servo to replace your steering one with in the turnigy 1/16th 4wd buggy/beetle/rally for extra strengthBought two of these for my Slick 360 tail. One started to tremble like hell right out of the box on the tester, the other after installation. So that's a faulty batch or? To me it's a 100pcnt loss!
Bought another 82MGs from local hobby shop at slightly higher price. Pretty much the same product, except the "Quality Pass" sticker. HK servos have purple sticker, the local ones -yellow. ..and the yellow worked...malsimo servo, quedan vibrando en cualquier posicin, calientan, es dinero tirado a la basuraToo sloppy for 17 bucks. On my Proxima II glider i god about 3mm slop on flaps. And no - linkages are perfectly good, the servos aren't. And worst of all, i bought them thinking there is a ball bearing in this servo. Nope, there isn't any.Good quick branded servo, it should be remembered that there is no bearings and the strong load clearances appear on the axis.These are fantastic servos at a great price from Hobby King.I bought this servo to tilt the rear motor on my tricopter. It was a recommendation from a user on YouTube who built a similar tricopter. I am very happy with its performance. I'll probably stick with this particular model of servo until I see one for myself that is better.Absolutely rock solid servo! Specifications verified as accurate (size/weight) with great torque & speed for size.
Worth the extra money for peace of mind.