New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Kit elicottero HK-600GT 3D elettrico w / o lame

Kit elicottero HK-600GT 3D elettrico w / o lame

Shipped From:
  • USA
  • Global
QTY:

Now save risparmia 0,00 € 0,00 €

131,11 €
Stato:
Disponibile
Peso:
2997 g
SKU:
HK600GT
WANT FREE SHIPPING? Click here to find out more!
Infine, grande scala volo elicottero con un budget di piccole dimensioni.
L'HK-600GT rompe tutte le regole e stabilisce un nuovo precedenza nel grande valore elicottero 3D.
Modellato sul famoso, premiato e comprovata T-Rex 600, l'HK-600GT spingerà le tue abilità di volo 3D ai loro limiti.
Il 600GT è un elicottero emozionante vedere in azione come ruggisce attraverso il cielo ed è sorprendentemente molto più facile a volare di una versione più piccola.
E '7075 testa in lega assicura piloti hard core 3D non rimarrete delusi nelle prestazioni e il peso leggero ma semplice e cappuccio attraente, più di titanio anodizzato componenti ne fanno un impatto visivo elicottero con prestazioni di copia di backup!
Garantiamo si voleva trovare un elicottero meglio ragionevoli di queste dimensioni da nessuna parte!
Caratteristiche.
Il disegno leggero fornisce la prestazione di volo impressionante e funzionalità 3D estremo.
testa del rotore / coda con cuscinetti assiali.
Centro di gravità del vassoio batteria progettata vicino alla testa del rotore.
cintura alta efficienza guidato coda.
Completamente guidato coda sistema di rotazione automatica.
montaggio servo trave di coda.
Fibra di carbonio aste di supporto del braccio e servo di coda di montaggio.
In fibra di carbonio telaio principale, pinne di coda e la staffa anti-rotazione.
Specifica:
Lunghezza: 1.200 millimetri (47.25 in)
Altezza: 388/405 millimetri (15.25 in / 16)
Principale Lunghezza lama: 600 millimetri
Rotore principale Diametro: 1.350 millimetri (53.15 in)
Rotore di coda: 240mm (9,45 in)
Motor Drive Gear: 10T (11T opzionale)
Principale Ingranaggio di azionamento: 170T
Coda di autorotazione Ingranaggio di azionamento: 180T
Coda Ingranaggio di azionamento: 40T
Guidare Rapporto di trasmissione: 1: 17.0: 4.5 / 1: 15.45: 4.5
Peso (w / o lama principale): 1340g
Peso di volo: circa 3000g (6,6 lbs)
 
Elementi richiesti.
motore brushless
Servi: Vedere elementi collegati qui sotto.
Radio Gear: Gyro / Rx
ESC: 80A o superiore.
Batteria: 3300mAh o superiore
  • SKU HK600GT
  • Brand -
  • Capacità ( mAh ) -
  • Peso (g) 2997.00
  • Lunghezza 645.00
  • Larghezza 115.00
  • Altezza 290.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

ottimo modello di classe 600 in rapporto al prezzo , lo consiglio

trending_up Value:
verified_user Quality:
playlist_add_check Overall:

ottimo modello di classe 600 in rapporto al prezzo , lo consiglio

Good deal for the money. A metal tail slider would be nice considering the tail rotor is all metal except for this piece. Good complete kit. High quality hardware. Good entry level helicopter kit.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good deal for the money. A metal tail slider would be nice considering the tail rotor is all metal except for this piece. Good complete kit. High quality hardware. Good entry level helicopter kit.

Today 04/16/2016. All head plastic links needed to changed. Was aprox 2mm too short.Replaced with original ones. If you try to give lenghts on links according 600CF manual, you remain with 2.5 mm thread in each link.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Today 04/16/2016. All head plastic links needed to changed. Was aprox 2mm too short.Replaced with original ones. If you try to give lenghts on links according 600CF manual, you remain with 2.5 mm thread in each link.

GOT ANOTHER HK600GT. ARRIVED ON TIME AND UNDAMAGED. THIS TIME IM GOING TO FIT IT INTO A FUNKEY 50 SIZE JETRANGER BODY. IVE HAD TO MODIFY THE TAILBOX SLIGHTLY TO ALLOW IT TO SLIDE THROUGH THE TAILBOOM OF THE JETRANGER, BUT IT FITS IN NICELY. REALLY GOOD VALUE KIT FOR THE PRICE. THANKS AGAIN HK.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

GOT ANOTHER HK600GT. ARRIVED ON TIME AND UNDAMAGED. THIS TIME IM GOING TO FIT IT INTO A FUNKEY 50 SIZE JETRANGER BODY. IVE HAD TO MODIFY THE TAILBOX SLIGHTLY TO ALLOW IT TO SLIDE THROUGH THE TAILBOOM OF THE JETRANGER, BUT IT FITS IN NICELY. REALLY GOOD VALUE KIT FOR THE PRICE. THANKS AGAIN HK.

GOT THIS HELI A WHILE AGO BUILT IT AND GAVE IT ITS MAIDEN FLIGHT TODAY. FITTED WITH HK401 GYRO BLUEBIRD SERVOS 150 AMP YEP ASC ASSAULT MOTOR AND JR RADIO GEAR. HOVERED NICE AND STABLE ON HEAD HOLD IN 17MPH WINDS. VERY IMPRESSED. GOOD QUALITY KIT. USE ALIGN 600 INSTRUCTIONS TO BUILD AND TAKE YOUR TIME. MINE USES 6S BATTERIES.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

GOT THIS HELI A WHILE AGO BUILT IT AND GAVE IT ITS MAIDEN FLIGHT TODAY. FITTED WITH HK401 GYRO BLUEBIRD SERVOS 150 AMP YEP ASC ASSAULT MOTOR AND JR RADIO GEAR. HOVERED NICE AND STABLE ON HEAD HOLD IN 17MPH WINDS. VERY IMPRESSED. GOOD QUALITY KIT. USE ALIGN 600 INSTRUCTIONS TO BUILD AND TAKE YOUR TIME. MINE USES 6S BATTERIES.

After building some of this helis 3 - 4 years before, with much work to do to fix some major problems, this kit was a big surprise. This time it is not for a friend, it was time for my first own HK-600 GT. It is far better packed than ever before, so the main rotor shaft is not bend. The main gears are perfect true-running without any issue. The main rotor is moving a little tight, but this will be fixed after it is re-build with loctite and grease. The tail rotor runs smooth, this should be perfect after re-building it. This time i don`t need an Align main shaft or gear, just the ball links. The ball links coming with my kit are far too tight so i`ll change them. The best thing is, i don`t have to file out the blade holders to make the rotor blades fit, and this is a big improvement against former kits. All ball bearings except for the ones in the push-pull mechanic run smooth, and the push-pull thing will be removed for a direct linkage from the servos to the swashplate. I reporter all the issues i found on earlier kits to Hobbyking, and now they`re fixed. The only issue left is a crack in the canopy from the main chassis, but this is easy to repair before it gets some paint. The slightly bent receiver platform can be corrected with some heat, so not really an issue. Thank you, Hobbyking, for your open ears and the improvements made on this kit! I`m happy with it!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

After building some of this helis 3 - 4 years before, with much work to do to fix some major problems, this kit was a big surprise. This time it is not for a friend, it was time for my first own HK-600 GT. It is far better packed than ever before, so the main rotor shaft is not bend. The main gears are perfect true-running without any issue. The main rotor is moving a little tight, but this will be fixed after it is re-build with loctite and grease. The tail rotor runs smooth, this should be perfect after re-building it. This time i don`t need an Align main shaft or gear, just the ball links. The ball links coming with my kit are far too tight so i`ll change them. The best thing is, i don`t have to file out the blade holders to make the rotor blades fit, and this is a big improvement against former kits. All ball bearings except for the ones in the push-pull mechanic run smooth, and the push-pull thing will be removed for a direct linkage from the servos to the swashplate. I reporter all the issues i found on earlier kits to Hobbyking, and now they`re fixed. The only issue left is a crack in the canopy from the main chassis, but this is easy to repair before it gets some paint. The slightly bent receiver platform can be corrected with some heat, so not really an issue. Thank you, Hobbyking, for your open ears and the improvements made on this kit! I`m happy with it!

I have the mini titan 450 and a trex 450. and I have a clone trex 500 with a md500 body on it with all hobbyking electrics. so I have now gone for the hk600 and wow grate heli for the price the trex600 parts fit to this heli but only from the first version (v1) now all I need for this hk600 is a nice scale body shell hope hobby king starts selling them for the 500 and 600 sized helis

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have the mini titan 450 and a trex 450. and I have a clone trex 500 with a md500 body on it with all hobbyking electrics. so I have now gone for the hk600 and wow grate heli for the price the trex600 parts fit to this heli but only from the first version (v1) now all I need for this hk600 is a nice scale body shell hope hobby king starts selling them for the 500 and 600 sized helis

the kits ok for the price a few small things are wrong with it but if you want quality you have to pay for it i'm still really happy 1/4 of the price of a real trex and you cant complain about that

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

the kits ok for the price a few small things are wrong with it but if you want quality you have to pay for it i'm still really happy 1/4 of the price of a real trex and you cant complain about that

Well let me tell you this heli is the best deal out there, I mean anywhere !! all the parts are in the box and not broke thanks to great packing by HK.. Shipping started out a little slow and I wasn't happy but HK Support was there for me and got the heli and set of blades to my front door in 12 days !!! Thanks HK Buy this heli you will love it ,I do....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well let me tell you this heli is the best deal out there, I mean anywhere !! all the parts are in the box and not broke thanks to great packing by HK.. Shipping started out a little slow and I wasn't happy but HK Support was there for me and got the heli and set of blades to my front door in 12 days !!! Thanks HK Buy this heli you will love it ,I do....

very good for low budged.
some places could be upgraded like
swash plate bearing is getting loose after few hour
swash plate anti rotation mount ball joint is getting loose from vibrations
tail controller brass is causing bearing to burn in extreme settings
but all fot this price is perfect

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very good for low budged.
some places could be upgraded like
swash plate bearing is getting loose after few hour
swash plate anti rotation mount ball joint is getting loose from vibrations
tail controller brass is causing bearing to burn in extreme settings
but all fot this price is perfect

Customer files
HK 600 GT LEFT SIDE Download [536]
HK 600 GT GYRO Download [525]
HK 600 GT GENERAL Download [440]
HK 600 GT RIGHT SIDE Download [639]
HK 600 GT GENERAL Download [440]
No File Name Download [4501]
377172265X159167X29.JPG Download [395]
HK 600 Download [381]
HK 600 Download [381]
989927405X191680X40.JPG Download [18]
  1. 1
  2. 2
  3. 3
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save