New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

HK-J500 CCPM 3D EP 500 formato elicottero Kit (JR Voyager)

HK-J500 CCPM 3D EP 500 formato elicottero Kit (JR Voyager)

Discontinued Product

Please continue searching for a similar product.
Peso:
1499 g
SKU:
HK-J500
WANT FREE SHIPPING? Click here to find out more!
Un clone esatto del JR Voyager-E, l'HK-J500 è un eccellente elicottero sportivo con componenti di qualità in tutto.
Se you''re non in elicottero della lega di stile bling 'e di come la macchina per avere un po' di classe e design intelligente pensato, quindi l'HK-J500 è una scelta eccellente.
Un bel cambiamento dai cloni T-Rex che si vedono ovunque.
Spec.
Lunghezza: 865 millimetri
Altezza: 298 millimetri
Principale Lunghezza lama: 425 millimetri
Rotore principale del diametro: 940 millimetri
Rotore di coda Diametro: 180mm
Motore Pignone: 17T (incluso)
Principale Ingranaggio di azionamento: 162T
Coda di autorotazione Ingranaggio di azionamento: 85T
Coda Ingranaggio di azionamento: 72T
Guidare Rapporto di trasmissione: 5: 1: 4.5
Peso (w / o sistema di alimentazione): 875g
Peso di volo: circa 1600g
Elementi richiesti.
Brushless Outrunner Motor
Servi: Vedere elementi collegati qui sotto.
Radio Gear: Gyro / Rx
ESC: 80A o superiore.
Batteria: 3300mAh 3S 20C o superiore.
  • SKU HK-J500
  • Brand -
  • Capacità ( mAh ) -
  • Peso (g) 1499.00
  • Lunghezza 0.00
  • Larghezza 0.00
  • Altezza 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

My nicest, most easly fly heli yet ! (i have over 35...) BUT the tail rotor DOES blow up in your face the first time you try it ! You have to change the bearings in the taildrive with som 'real' bearings (and maybe an original tail-case.... and sand down the tailblades so they can move easly). I have change these things now, and at last i have a Heli that i can teach students with. Almost forgot... The blades are good for... Nothing so far ;-D I also use the ASSAN 250 Gyro with a standard FUTABA Digital servo S3151, Rock solid ! Hitec HS-325HB on the swash. 4cell 3300mA battery gives me a smooth ride for about 10minutes. I LOVE IT (now) c",)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

My nicest, most easly fly heli yet ! (i have over 35...) BUT the tail rotor DOES blow up in your face the first time you try it ! You have to change the bearings in the taildrive with som 'real' bearings (and maybe an original tail-case.... and sand down the tailblades so they can move easly). I have change these things now, and at last i have a Heli that i can teach students with. Almost forgot... The blades are good for... Nothing so far ;-D I also use the ASSAN 250 Gyro with a standard FUTABA Digital servo S3151, Rock solid ! Hitec HS-325HB on the swash. 4cell 3300mA battery gives me a smooth ride for about 10minutes. I LOVE IT (now) c",)

Will there ever be spareparts for this?? broke the tail, and this model doesn`t even google (jr voyager-e) shall i just discard it, and get something else?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Will there ever be spareparts for this?? broke the tail, and this model doesn`t even google (jr voyager-e) shall i just discard it, and get something else?

Real shame about this Heli. Had one for about 2 months.
It looks nice, and flies well - for a short time.
Weakness is NO SPARES and the Tail all fell to bits on my model.
Tail bearing shattered, and $70 on another kit for 1 bearing ? Nah. Tried using head bearing from the 450, but to no avail. Proper bearing is flanged.
Gonna stick with the HK500.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Real shame about this Heli. Had one for about 2 months.
It looks nice, and flies well - for a short time.
Weakness is NO SPARES and the Tail all fell to bits on my model.
Tail bearing shattered, and $70 on another kit for 1 bearing ? Nah. Tried using head bearing from the 450, but to no avail. Proper bearing is flanged.
Gonna stick with the HK500.

There are some major issues with the tail section of this heli.
Ive built 3(!!!) and they all have the same problem with the tail.
Problem is the tail housing is made of plastic, and what happends is there is slop in the tail output shaft bearings, they can move around a little bit, and this only gets worse. After 5min hover, its game over.... by then you will have a bent tail shaft , and MAJOR slop in the shaft because the plastic have melted around where the bearing is seated. Also the tail output shaft is only 3mm, way to thin for a 500size heli.

Ive built it according to the Super Voyager manual, and all three have had the exact same problem. Im really stuburn , and 110pcnt wanted this heli to work, but now ive given up, dont want to invest any more time and money with this heli. My recommendation , stay away!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

There are some major issues with the tail section of this heli.
Ive built 3(!!!) and they all have the same problem with the tail.
Problem is the tail housing is made of plastic, and what happends is there is slop in the tail output shaft bearings, they can move around a little bit, and this only gets worse. After 5min hover, its game over.... by then you will have a bent tail shaft , and MAJOR slop in the shaft because the plastic have melted around where the bearing is seated. Also the tail output shaft is only 3mm, way to thin for a 500size heli.

Ive built it according to the Super Voyager manual, and all three have had the exact same problem. Im really stuburn , and 110pcnt wanted this heli to work, but now ive given up, dont want to invest any more time and money with this heli. My recommendation , stay away!

Arrived safely without any damage to the heli kit. with low prices for big heli, so I do not taxable.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Arrived safely without any damage to the heli kit. with low prices for big heli, so I do not taxable.

Type your review here.

Try to include as much data as possible.cant seem to get a replacment gear <main> anybody know where i can get one for this bloody thing

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Type your review here.

Try to include as much data as possible.cant seem to get a replacment gear <main> anybody know where i can get one for this bloody thing

I would buy this engine
is this motor a good one for these helicopter.
TR31265-1300 - Turnigy 500 H3126 Brushless outrunner
thank you for the reply

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I would buy this engine
is this motor a good one for these helicopter.
TR31265-1300 - Turnigy 500 H3126 Brushless outrunner
thank you for the reply

eu ainda no o tenho mais quem tem diz que ele timo helicptero bem estvel aconselho que robistas comprem tambm .

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

eu ainda no o tenho mais quem tem diz que ele timo helicptero bem estvel aconselho que robistas comprem tambm .

Cant get mini servos to fit when using the servo adapter, its too tight. Have to buy big standard size servos. Other than that the kit is good, but i will only give 4 stars because of servo problems.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Cant get mini servos to fit when using the servo adapter, its too tight. Have to buy big standard size servos. Other than that the kit is good, but i will only give 4 stars because of servo problems.

Pro's: Excellent quality of both materials and workmanship!!



con's: Too bad the kit contains allenbolts with non-metric head-sizes. I did not expect that, but it's not a big problem to buy a suitable allenkey.

- mine came without a manual, but it is not too hard to find a manual on the net

- no spareparts available. you have the choice to buy either expensive JR-parts of to buy another kit at HC and use it as a donor.

-

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Pro's: Excellent quality of both materials and workmanship!!



con's: Too bad the kit contains allenbolts with non-metric head-sizes. I did not expect that, but it's not a big problem to buy a suitable allenkey.

- mine came without a manual, but it is not too hard to find a manual on the net

- no spareparts available. you have the choice to buy either expensive JR-parts of to buy another kit at HC and use it as a donor.

-

  1. 1
  2. 2
Customer files
JR Super Voyager Download [4709]
tail modified Download [5172]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!