New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

HK Pilot Power Module VI, Scheda di distribuzione e doppio UBEC ALL-In-One (120A e 10s)

HK Pilot Power Module VI, Scheda di distribuzione e doppio UBEC ALL-In-One (120A e 10s)

Now save risparmia 0,00 € 0,00 €

32,70 €
Stato:
Non disponibile!
Peso:
101 g
SKU:
9387000061-0
WANT FREE SHIPPING? Click here to find out more!

Il modulo di distribuzione e di potenza HK Pilot Power in uno sta semplificando la configurazione, riducendo i punti di fallimenti e fa per un ambiente pulito e ordinato l'installazione. L'All-in-One ha un progetto preliminare di bilancio, Dual 12V e 5.3V UBECs, tensione e sensori amperaggio tutti integrati in un pacchetto di montaggio 45 millimetri standardizzato.

Il lato distribuzione di energia è su un formato di montaggio 45x45mm standardizzato ed è valutato a 120A di corrente e più di punti di contatto sufficiente per un Octocopter. Il doppio UBEC del sono 12V e 5.3V, rispettivamente, per il controllore di volo pilota HK e l'ingranaggio aux 12V come FPV. L'Amp e sensore di tensione sono compatibili con HK pilota FC e APM / Pixhawk FC con il connettore a 6 pin standard. L'ALL-IN-ONE è 10s capaci anche per applicazioni ad alta tensione o come a casa con 3s setup troppo.

Caratteristiche:
PDB / 12V e 5.3V UBECs / V e un sensore tutto in uno
120A capace
10s capaci
16 uscite contatto di potenza 8+ 8-
un omogeneo dimensionamento
HK Pilot APM / Pixhawk compatibile

Specifiche:
PCB attuale: uscite 120A (MAX)
Corrente di uscita UBEC: 2.5A
Alimentazione: 2 punti di contatto x
Potenza di uscita: 16/8 punti x contatto e 2 per 12V UBEC 5.3V sul 6 pin spina
Dimensioni: 50x50x5mm, 45x45 montaggio
Peso: 11.6g

La confezione include
UBEC scheda di distribuzione dell'alimentazione * 1
cavo 6pin * 1

  • SKU 9387000061-0
  • Brand H-King
  • Capacità ( mAh ) -
  • Peso (g) 101.00
  • Lunghezza 50.00
  • Larghezza 10.00
  • Altezza 50.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Nice little PDB with everything you need

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice little PDB with everything you need

This board could benefit from a few design changes. First, the board should have thermal relief pads to make soldering easier. Second, holes could be drilled to make the physical wire connection more robust. Third, the addition of LEDs on the voltage regulators would make this product a little more user friendly.

I agree with the other reviewers that soldering to this board is very difficult. The secret is to use a good quality gun with good thermal recovery.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This board could benefit from a few design changes. First, the board should have thermal relief pads to make soldering easier. Second, holes could be drilled to make the physical wire connection more robust. Third, the addition of LEDs on the voltage regulators would make this product a little more user friendly.

I agree with the other reviewers that soldering to this board is very difficult. The secret is to use a good quality gun with good thermal recovery.

bonne plaque de distribution, pour le poids, le prix, et les deux sorties 5V et 12V

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

bonne plaque de distribution, pour le poids, le prix, et les deux sorties 5V et 12V

these boards are pretty much bulletproof, its my 4th one and i havn't had any issues with any of them

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

these boards are pretty much bulletproof, its my 4th one and i havn't had any issues with any of them

Nicely made and finished power distribution board with many input and output pads which provide easy soldering (just put the soldering iron on 400 degrees). Because of this it will be really hard to notice that you soldered wires by hand.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nicely made and finished power distribution board with many input and output pads which provide easy soldering (just put the soldering iron on 400 degrees). Because of this it will be really hard to notice that you soldered wires by hand.

???? ??? 120????? ??..

?? ????!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

???? ??? 120????? ??..

?? ????!

Used the PDB on an X580 frame with a 4S battery powering 4 NTM 35-48 motors. Read the reviews of it being hard to solder, a cheap 15W soldering iron with an old tip will certainly not do the trick but a 65W iron worked just fine. Haven't used the BEC capability so can't comment, and since I have a quad only using half of the board but the price can't be beat and saves you from having to fabricate your own. Very pleased.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Used the PDB on an X580 frame with a 4S battery powering 4 NTM 35-48 motors. Read the reviews of it being hard to solder, a cheap 15W soldering iron with an old tip will certainly not do the trick but a 65W iron worked just fine. Haven't used the BEC capability so can't comment, and since I have a quad only using half of the board but the price can't be beat and saves you from having to fabricate your own. Very pleased.

very difficult to weld while you use flux. I do not know what has or varnish coating leads but it is very difficult to weld. a good product that eventually turns into a nightmare thinking that cables can be released. As the wires carry the energy of our birds , we know what happens in case of a power failure ...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very difficult to weld while you use flux. I do not know what has or varnish coating leads but it is very difficult to weld. a good product that eventually turns into a nightmare thinking that cables can be released. As the wires carry the energy of our birds , we know what happens in case of a power failure ...

I purchased this for a QAV250 clone, the board is a good size but a bit bulky for a mini quad. No problems running it but not ideal for super compact setups. Great value for money.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I purchased this for a QAV250 clone, the board is a good size but a bit bulky for a mini quad. No problems running it but not ideal for super compact setups. Great value for money.

Well.. I thought I found the perfect board.. When you get it you think.. Nice.. Good quality. The board is really thick. Perfect for High CUrrent. 5.3/Amperage Reading/12V - PERFECT.

But there is a bottom side. As some mentioned here: ITs the 12V Regulator. After ~4h of total use it poofed in smoke. Hopefully my 12V Cam Hardware is not damaged. Need to see what Hobbyking does.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well.. I thought I found the perfect board.. When you get it you think.. Nice.. Good quality. The board is really thick. Perfect for High CUrrent. 5.3/Amperage Reading/12V - PERFECT.

But there is a bottom side. As some mentioned here: ITs the 12V Regulator. After ~4h of total use it poofed in smoke. Hopefully my 12V Cam Hardware is not damaged. Need to see what Hobbyking does.

  1. 1
  2. 2
Customer files
PDB in FPV250 Download [3102]
Board before installation Download [1553]
No File Name Download [2966]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save