HK450V2 rotore principale Grip Set
Per V2 elicotteri.
Product with good looks, but very very very poor quality. Bearings are a disaster, where the holes entering the too large.Plastic of HK450 V2 are weak but very preciseFitted together well, but far too much up & down movement for my liking. Will look into it but refitted original plastic blade holders as they have no play.Came with a bent feathuring shaft but the rest was goodgreat main blade grips,the only reason i give the 4 star on quality is the feathering shaft was 41.5mm should have been 41mm long. the 41.5mm gave the grips a little slop so i had to use my on feathering shaft that came with the head,other than that it's a great buy. thanks HKI must be one of the lucky ones, stripped my head and installed these as soon as they come in, all parts where there and the fit was great. Good value and smooth operation.Multi-resistant metalI only needed the blade grips as one of mine was bent. to get a feathering shaft, bearings and collors is just a bonus.have used these blade grips on my hk450.little bit of p lay but will not cause any blade tracking problems. my 450 has been flying on a set for over 25 flights and still going strong.....thanks hkVery well-finished. This is an must-do upgrade for all HK 450 (the GTs one are it yet). Check that grips are ok after the shipment.Good quality and fit perfectly to Trex 450 V2.