Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

HKPilot Mega 2.7 regolatore di volo USB / Gyro / ACC / MAG / BARO

Generating Links

HKPilot Mega 2.7 regolatore di volo USB / Gyro / ACC / MAG / BARO

Prezzo:

Now save risparmia 0,00 € 0,00 €

70,39 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
387000051-0
Spedizione gratuita? Clicca qui per saperne di più!

La nuova HK PilotMega 2.7 è un aspetto fresco e un rinnovamento del popolare controllore di volo basato APM. Nel corso del progetto e sviluppo del 2,5 piattaforma Open Source ArduPilot, sono stati notati alcuni problemi noti e le sfide ergonomiche. L'obiettivo della HK PilotMega 2.7 è stato quello di correggere e migliorare questa grande piattaforma, restituendo alla comunità un design che è migliorato e stabile e ancora prezzi ragionevoli, rendendo questo super potente controllore di volo una grande opzione fiscale per le varianti a 32 bit. Ci sono 5 notevole miglioramento nella 2.7, e tutti hanno bisogno di file di costruzione sono disponibili nella scheda file per la comunità da utilizzare.

HK PilotMega 2.7 Miglioramenti:

1) Tappo 100uF in Vcc e condensatore 10uF tantalio aggiunto per fermare 3.3V cattivi problemi di salute giroscopio

2) Sostituzione del 1,0 millimetri 6p porta GPS (non utilizzati / ridondante) con df13-4P I2C porta bussola esterna, mettendo porti GPS e bussola esterna accanto all'altro, rendendo per connessioni più facili.

3) Porta multifunzione MUX aggiunto nella vecchia posizione della porta I2C, questo consente agli utenti di selezionare una uscita dalla rampa di legame (UART0, UART2, I2C, OSD "default è OSD". Questo nuovo layout rende la trasmissione dei dati più stabile con una resistenza di isolamento.

4) 3.3V e 5V Dataflash / Flashrom scambiato problema traccia corretto al AT45DB161.

5) Bussola esterno di abilitazione / disabilitazione ponticello aggiunto, versi dover tagliare un filo traccia.

Il HKPilot Mega 2.7 si basa sulla rapida evoluzione e raffinato mega Ardupilot o "APM", un progetto open source dalla robotica 3DR. Questo controllore di volo stupefacente permette all'utente di trasformare qualsiasi ala fissa, ala rotante, o di un veicolo multi-rotore (anche barche e automobili) in un veicolo completamente autonoma, in grado di eseguire una vasta gamma di compiti, anche programmati missioni GPS con waypoint (con la modulo GPS opzionale).

Diverse interfacce utente sono disponibili per la programmazione, la revisione tronchi, anche alcune applicazioni per smart phone e tablet. La radio telemetria opzionale consente la comunicazione radio bidirezionale offrendo un controllo totale e fornisce dati in tempo reale al tuo computer o tablet. L'elenco di ciò che questo controllore di volo è in grado di è stata rapidamente superata da ciò che non si può, con le caratteristiche, le modalità di volo e piattaforme supportate. Il progetto APM è supportato da migliaia di utenti che spingono questo controllore di volo open source per essere uno dei migliori sistemi disponibili.

Caratteristiche:
• problema 3.3v di "cattivo brughiera Gyro" risolto in 2.7
• Connettori trasferiti per il layout di filo meglio
• Porta Mux aggiunto per OSD o altre uscite selezionabili
• Dataflash scambiato linee a tensione fissa in 2.7
• bussola esterna Jumper aggiunto
• Arduino Compatibile
• pre-saldato e collaudato
• giroscopio a 3 assi, accelerometro, magnetometro e ad alte prestazioni barometro
• Costruito in 4 chip di MP Dataflash per la registrazione automatica dei dati
• bussola Honeywell HMC5883L-TR digitale
• 6 DOF accelerometro / giroscopio MPU-6000 di Invensense
• Measurement Specialties MS5611-01BA03 barometrica sensore di pressione.
• Atmel ATMEGA2560 e ATMEGA32U-2 (trattamento e la funzione USB).
• Micro USB
• Supporto bussola esterno
• Ingresso GPS, I2C, Modulo di potenza di ingresso
• porte dei sensori di radio telemetria, OSD e la velocità

Specifiche:
Dimensioni: 44x70x15mm (con il caso)
Peso: 32g (con il caso)

include:
HKPilot Mega 2.7
Collegamento porta x 5
nastro biadesivo caso e 3M

* Nota: Il riferimento alla APM si riferisce al ArduPilot del progetto, una famiglia di autopiloti open source basato sulla piattaforma informatica open source Arduino, sviluppato da 3DR e la comunità open source. Si compone di una scelta di ArduPilot Mega (APM) di elettronica e una gamma di versioni di software libero per i veicoli diversi ed è governata da una creative commons licenza open source. Questo prodotto è basato sul progetto open source APM dalla robotica 3D, i file CAD per la licenza Creative Commons è disponibile nella scheda file.

* Nota: Questo non è un prodotto di marca originale Arduino.

  • HK PilotMega 2.7
Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Daniel | Acquirente verificato

  • Overall
  • Quality
  • Value

Good Board

Oct 30, 2016

Good board, easy to use and setup. The connectors are Molex Picoblade 1.25mm (these are white), not Hirose DF13 (3DR produced boards use these and they are beige). When getting cables make sure you are buying the right one. Arducopter no longer support these boards, so you wont be able to flash firmware higher then 3.2.1. The board is a clone of the APM 2.6, so when looking online for info look up the APM 2.6

Aaron | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jun 01, 2015

This FC is awesome and loaded with features for the price. I consider myself a bad pilot and back when I did RC heli I quit doing it because cost from crashes was getting to high. This board with RTL (Return To Launch) has save my lots in what of been crashes. This board has built in gimbal control, gps hook up, etc. A lot for the money, but most important compatible with easy to use software with lots of online instructions.

dale | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

May 03, 2015

We use this HK version in my College UAS course. We've tested this one verses the name brand that this is cloned from and don't see any difference between them related to setting up, programming or flying. For most students, we save a few dollars when we can, so this is the one the professor recommends the students to buy.

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 30, 2015

Works surprisingly well! Very stable flight. Easy to configure with APM Planner.

Steve1973 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Apr 10, 2015

Great Board for the price. Maintains good position hold with a Quanum LEA-6h Gps. You must mount the controller to eliminate vibration,using foam etc. Using the Mission Planner software is straight forward,firmware I recommend no higher than v3.2 at this present time. Loses 1 star for having the cover screws on the bottom. A lot more practical if you could access them from the top. I'm new to the multi-rotor hobby and found it easy to use and customise. I'm a fan of open source!

ZK-DWF | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Apr 03, 2015

Bought this to replace my KK2.1 which I had outgrown in five months!!! Looked around at what was available, and really liked the APM model. The HKPilot Mega is a lot cheaper, but still has the same functionality as the real APM Mega. Have got this running faultlessly on my SK450 Deadcat with Q Brain 25A ESC. A few hiccups setting it up, but nothing that Google couldn't sort out for me. I have it running very, very stable with all the tricks ... Drift, RTL, Loiter, GPS, Compass. Really like the downloadable data files so that you can review the telemetry from each flight (not interested in real time stats, just yet). Seem to be getting more flight time out of this flight controller than the KK2.1 - 1 to 2 mins more.

Timothy | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Mar 08, 2015

Using this on my DIY tricopter and works perfectly! Arrived with no problems. You will have to DIY a foam insulator for the barometer as no foam is provided. Screws are mounted from the base so a pain when you need to open the case when it's mounted on your multirotor. 2 jumpers in the HKPilot- one to be removed if your using the Power Module and another to remove when using an external compass. External Compass port is just below the GPS port unlike the 3DR board. Finish is good and soldering is neatly done. Comes with small bits of foam double sided tape, but I used my own tape instead.
Hooked up to Mission Planner without a glitch and firmware loaded with no issues. calibration via mission planner was troublefree! For the cost...Happy and Satisfied as my tri flies perfectly! Recommended!!

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 02, 2015

My housing was a little warped making it difficult to put together initially. Otherwise really easy to get working

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 11, 2015

Awesome flight controller! You can do anything with this!

Mesiento | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jan 29, 2015

Ho installato la scheda su un trex500, non facilissimo, arducopter la versione piu' difficile da mettere a punto, ma seguendo la guida on-line si riesce a metterla a sopperire. La scheda funziona molto bene ed assemblata con criterio, si noti che arriva senza un rigo di istruzioni. comunque 5 stelle.

  1. 1
  2. 2
  3. 3
File dei clienti
Link to optical flow guide Download [10]
Optical Flow Pinout Download [126]
Powet Rails Download [253]
No File Name Download [20]
No File Name Download [99]
high res PDF of board schematic Download [49]
11x17 PDF of 2.7 schematic Download [47]
Manual HKPilotMega 2.7 V. APM2.6 Download [1352]
Manual HKPilotMega 2.7 V. APM2.6 Download [1352]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!