-
Descrizione
prodotto -
micromotori di alta qualità. ferita di precisione con filo d'argento-rame e ultra lamierini hard-stampa.
Prestazioni estreme ed efficienza per il micro aereo.
Spec fabbrica.
Kv: 7000rpm / v
Lipo Range: 3.7V 1S
prop consigliato: 2508-3020
Corrente max: 2A
Burst corrente (10sec): 2.5A
Peso: 2.3g (tra cui il Monte e fili)
Albero: 1,5 millimetrilunghezza del pozzo: 4mm
Dimensioni: 13 x 8mmDati di test:2508 prop (consigliata)Tensione: 3.7VCorrente: 0.9ASpinta: 19g3020 propTensione: 3.7VCorrente: 1.8ASpinta: 27g -
Product
Specifications -
Ulteriori informazioni
-
SKU:
HK-AP02-7000
-
Brand:
HobbyKing
-
Peso (g)
12.00
-
Lunghezza
82.00
-
Larghezza:
11.00
-
Altezza:
35.00
-
Kv ( rpm / v )
7000.00
-
Correnti Max (A)
2.50
-
Potenza ( W ):
0.00
-
Lunghezza B ( mm ):
8.00
-
Can Lunghezza D ( mm )
2.00
-
Max Tensione (V )
4.00
-
Albero A ( mm ):
2.00
-
Unit Weight (g):
2.3
-
Diametro C ( mm )
13.00
-
Lunghezza totale E ( mm )
13.00
-
Resistenza ( mh ):
0.00
-
SKU:
-
Community
Discussions -
-
Rate&
Review -
I have this motor since 2 years and finally could test it.
GWS2510, small plane AUW 18g with battery Turnigy 160mAh, current 0.99A, 18750rpm, 18-20g estimated thrust.
ESC is the one integrated into supermicro 2.4GHz 5ch brick.
Really smooth, silent, no vibrations (I balanced the GWS2510 first). The servos on the brick are really noisier.Use it as micro heli tail motor. Different kind of mountings (screws beside axis) would be good.
Good motor, not that cheap, but very good.I use this motor in a small depron-glider. 1g ESC, 2xToki servos, 5ch pene reciever, 1S 138mAh Lipo and GWS 3x2 porpeller. Flightwight 37.5g (wingspann84cm). Its a little bit noisy but it's ok. The power of the motor is super!Amazing motor for 1S lipos. I got 36g thrust with a GWS3030.A nice motor. I had bought the 2g hexTronic motor before, but never got that really run nicely. Might have been a problem with the ESC, but then again, read in the net about bearing problems of that one, too. This AP-02, OTOH, works smoothly with the HK mini-ESC. The 1.5mm shaft could be fitted with a prop adapter, but the 3020 prop can also be slightly reamed to snugly fit the shaft. Just need to build a model for the power train... :-)Excellent upgrade for 4G3 micro heli- tail motor. More power than original brushless motor, fits motor holder with only 1 small adjustment (cutting away 1 bar for motor axle).
its so cute! tiny, wow!! very coolgreat micro motor! Ap motors are know for quality and now HK has them ar a great price! -
Upload
Videos -
Upload
Files