Registrati

Product Finder

Impostazioni

Useful links

Chat dal vivo
 
[["US","AU","GB","DE"]]
Registrati

Dipartimento Funzione Extra 260 3D EPO Rosso (PNF)

Dipartimento Funzione Extra 260 3D EPO Rosso (PNF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
2275 g
SKU:
extra-red260
Descrizione
prodotto
Il Dipartimento Funzione Extra 260 è un vero e proprio esecutore 3D. Questo modello è facile da mettere insieme e avrà stai facendo margine affilato al vostro campo locale nel giro di un'ora e mezza di apertura della scatola!
 
Così come tutti del servo, del motore e ESC essere pre-installato, questo modello ha bisogno abilmente senza colla a tutti per assemblare, il piano di coda e lo sterzo ruotino di coda sono collegati da 2 bulloni, l'ala 1pc bulloni semplicemente sulla sotto il baldacchino magnetica. Realizzato in super resistente EPO, decalcomanie sono pre-applicato, sotto-carrozza è in lega dura con ghette di plastica pre-muro e un altro bullone su punto. Il portello Lipoly è nel naso per la sostituzione delle batterie veloci.
 
Una combinazione di volo basso-peso, grandi superfici di controllo e un sacco di potenza dal motore brushless pre-montato filatura una grande elica SF significa un grande esecutore a qualsiasi velocità. Il Dipartimento Funzione Extra 260, mentre l'ideale per il volantino 3D su tassi elevati, è anche un facile da far volare il modello, una volta istituito il tassi bassi, che lo rende una buona scelta per lo sport e pilota intermedio cercando di volare qualche acrobazia meno estreme.
 
Specifiche:
Apertura alare: 1.000 millimetri
Lunghezza: 960 millimetri
Peso di volo: 850g
Motore: 2830 1250kv motore brushless outrunner
ESC: 30A w / BEC
Servo: 9g x 4
4 canali (acceleratore, alettoni, elevatore, timone)
C di G: 75mm ~ 80 millimetri dal bordo superiore
 
include:
Y-piombo
Hardware
Prop & Spinner
 
Richiede:
Il proprio 4 ~ 6 canali TX / RX
2200mAh 2 ~ 3s 7.4 ~ 11.1v Lipoly Batteria (Prop fino a 9x5 "per 3s)
Product
Specifications

Ulteriori informazioni

  • SKU:
    extra-red260
  • Brand:
    N/A
  • Peso (g)
    2275.00
  • Lunghezza
    1050.00
  • Larghezza:
    160.00
  • Altezza:
    300.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Good air-frame but poor electronics. A plane is only as good as the electronics in the plane so that is the reason for the low quality rating. Due to all the poor reviews on the electronics in the plane, I replaced all the electronics with better quality electronics and this plane performs outstanding. So much fun, I will buy another one if the plane ever needs to be replaced. It would be better if it was offered as a kit style for less money so you could pick your electronics Anyway, one of my favorites with the better electronics.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought this plane to fly a first 3d plane and was planing to fly stock. First thing after building the plane which didnt take long was the ESC burnt out in the first five mins. i bought a new one dualsky 40amp got it a week later tried it again and the motor burnt out in first five mins. Then i bought a new motor that was suggested in this forum emax bl 2220/07. The rear wheel is to weak and puts to much pressure on the flimsy rudder so i fixed it solid with epoxy just forward of the rudder and its solid now, but it want taxi now, does not worry me. Tighten all the screws on the clevises they come loose. Maiden flight in 2 weeks will post another review then. Basically your buying a foam plane. Now go out and buy a new motor and esc. I'll rate it once i fly it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this plane. Set it up with stock components. After 5mins the motor burnt out mid flight and i almost crashed the plane as a result. The stock prop they give you with this plane is too big for this stock motor. I was running a 3cell 1600mah lipo. I have been in contact with hobbyking to get them to replace the motor. Sent them several pictures and even a video and they refuse to do anything about it. It has been over a month now. F & ^ K YOU hobbyking!!! Dont buy this plane. The motor will fail within 5mins. You have been warned!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this plane. Set it up with stock components. After 5mins the motor burnt out mid flight and i almost crashed the plane as a result. The stock prop they give you with this plane is too big for this stock motor. I was running a 3cell 1600mah lipo. I have been in contact with hobbyking to get them to replace the motor. Sent them several pictures and even a video and they refuse to do anything about it. It has been over a month now. F & ^ K YOU hobbyking!!! Dont buy this plane. The motor will fail within 5mins. You have been warned!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
OK firstly heres a thread for this aircraft, check it out, take the advice and you'll have heaps of fun with this plane. http://www.rcgroups.com/forums/showthread.php?t=1427184



Firstly my summary: this aircraft is worth the money for the airframe alone, great quality. When set up correctly it is one of the most responsive aircraft I have seen or flown, does all the tricks and then some. Looks great too. The drawback is the stock electronics installed, they do the job but don't match the quality of the airframe.



Issues:-

- Stock motor is over propped, if you run as it the motor will send out a whiff of white smoke and say bye bye. get a smaller prop check the thread for details.

- Landing gear is useless, made of soft aluminium bends when landing on smooth surface, some people have used reinfoced landing gear which causes other issues. If landing on grass surfaces remove the LG and make it a belly lander,

- Structural weak point behind firewall and start of wing root. If using strengthened LG will cause it to crack or break, easily repaired. I'm belly landing and have a small crack, I've reinforced mine with clear packing tape.

- Supplied servos are OK but I've swapped mine out. (if you are replacing the rudder and elevator servos you can put longer arms on them and move them more into the centre for improved throws.

- As with most HK planes, clevices are of poor qual
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Airframe is great. Landing gear is garbage. Ripped out on a super soft landing. Speed controller fried on 2nd flight. After reading a bit more it looks like it was way over propped out of the box. HK went back and modified the description on the page to "prop down". This of course after the magic smoke came out of my ESC.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Arrived within 3 days of placing order from NSW warehouse. Plane finish is great however it does have it's issues: The undercarriage is useless and needs replacing with something much stronger. With the supplied prop my motor and speedy burn't out within seconds on the first flight. The plane is very tail heavy and needs weight added to the nose. The battery hatch has nothing to secure to. The front of the plane is very fragile and the wings need to be epoxied to the fuselage to strengthen the front of the plane. Having said that when I

changed my motor to a 28-30 1500kV, 40 Amp speedy and an 8x8 prop the plane flew very well. Not for beginners but with some modifications it can be turned into a good flyer.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Let me start by qualifying my 3 star rating. It's 5 stars for flight characteristics and 1 star for everything but the foam. I'll start at the front. The motor is too underpowered for the supplied prop, above half throttle it starts to smoke. I've installed an Emax BL2220/07, which fits right in with just a small amount of front cowl to be removed. The front cowl came loose in flight and was chewed up by the prop. The battery cover needs to be secured properly or you'll loose it. The motor cut out in flight so I guess I'll change the ESC. The undercarriage is woefully weak and not secured well enough even for a light landing. The wing servos were not secured and the pushrod clevis' are hopeless. The foam is great and it flies beautifully.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a great plane. Easy to put together and no glue required. Flew nicely on maiden flight and trimmed easily. My first landing was controlled and gentle but the under carriage bent and then fell off on the second soft landing. The under carriage needs to be strengthened.

My original prop was a 1047 SF however this drew 31 amps on the speedie and it was getting hot after each flight. I changed the prop to an APC 8x8 and now are drawing 25 amps maximum which is fine for the 30 am ESC. I would recommend this plane at this stage. Lets see how long it lasts.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Flies great!no bad character.power system needs improvement.broke my landing gear and motor mount is uprooted-needs reinforcement.Overall good plane.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.