New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Dipartimento Funzione Pubblica HKPilot Mega Mini regolatore di volo e pilota automatico con cavi

Dipartimento Funzione Pubblica HKPilot Mega Mini regolatore di volo e pilota automatico con cavi

Now save risparmia 0,00 € 0,00 €

74,05 €
Stato:
Non disponibile!
SKU:
9154000012-0
WANT FREE SHIPPING? Click here to find out more!

Il HKPilot Mega Mini è un sistema autopilota sorgente e controllore di volo aperto completo con tutti lo stesso potere e le caratteristiche del suo fratello maggiore.

Il HKPilot Mini è creativamente ridisegnato in un fattore di forma molto più piccolo, e tuttavia mantiene la piena funzionalità e porte dall'originale, perdendo solo un paio di pin analogici che normalmente non verrebbero utilizzati in un progetto mini dimensioni. Il HKPilot si basa sulla rapida evoluzione e raffinato mega Ardupilot o "APM", un progetto open source dalla robotica 3DR. Questo controllore di volo stupefacente permette all'utente di trasformare qualsiasi ala fissa, ala rotante, o di un veicolo multi-rotore (anche barche e automobili) in un veicolo completamente autonoma, in grado di eseguire una vasta gamma di compiti, anche programmati missioni GPS con waypoint (con la modulo GPS opzionale).

Diverse interfacce utente sono disponibili per la programmazione, la revisione tronchi, anche alcune applicazioni per smart phone e tablet. La radio telemetria opzionale consente la comunicazione radio bidirezionale offrendo un controllo totale e fornisce dati in tempo reale al tuo computer o tablet. L'elenco di ciò che questo controllore di volo è in grado di è stato rapidamente superato con ciò che non è possibile, con le caratteristiche, le modalità di volo e piattaforme supportate. Il progetto APM è supportato da migliaia di utenti che spingono questo controllore di volo open source per essere uno dei migliori sistemi disponibili.

Il nuovo MEGA HKPilot Mini perde nulla dal suo fratello maggiore, ma le dimensioni e il peso e alcuni perni analogiche, permettendo per i veicoli più piccoli e leggeri. La mini è solo ad un passo più in HKPilots evoluzione.

Caratteristiche:
• Arduino Compatibile
• pre-saldato e collaudato
• giroscopio a 3 assi, accelerometro, magnetometro e ad alte prestazioni barometro
• Costruito in 4 chip di MP Dataflash per la registrazione automatica dei dati
• bussola Honeywell HMC5883L-TR digitale
• 6 DOF accelerometro / giroscopio MPU-6000 di Invensense
• Measurement Specialties MS5611-01BA03 barometrica sensore di pressione.
• Atmel ATMEGA2560 e ATMEGA32U-2 (trattamento e la funzione USB).
• Micro USB
• Supporto bussola esterno
• Ingresso GPS
• Ingresso IIC
• Modulo di potenza di ingresso
• porte dei sensori di radio telemetria, OSD e la velocità

Il manuale è pubblicato nella scheda di file per una spiegazione più approfondita delle connessioni e delle funzioni. perni analogici A5 ~ 11 non sarebbe stato utilizzato in una mini applicazione sono stati rimossi per risparmiare peso e dimensioni.

Specifiche:
Dimensioni: 32x50x10mm
Peso: 8g

include:
HKPilot Mega MINI 2.5.2
Collegamento porta x 8

Questo prodotto è basato su open source APM progetto da 3DR Robotics, i file CAD per la licenza Creative Commons è disponibile nella scheda file.

* Nota: il colore del filo del cavo non è un indicatore di polarità e sono solo colorate per facilitare la separazione, si prega di seguire l'etichettatura di bordo per una corretta tensione e gli ingressi e le uscite a terra.

** Nota: modulo GPS, la radio telemetria e altri sensori non sono inclusi (venduto separatamente). C'è stato un errore nella descrizione originale su specifiche da parte dello sviluppatore e sono stati aggiornati.

* Nota: Questo non è un prodotto di marca originale Arduino.

  • SKU 9154000012-0
  • Brand HobbyKing
  • Capacità ( mAh ) -
  • Peso 26.0000
  • Lunghezza 100.00
  • Packaging Width 15.00
  • Altezza 60.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Using this flight controller for my Dart 400 and fits great and works like a charm. Only thing is the USB connector is fragile and easy to break off from the board with constant use. Also i would prefer if the USB port was located on the side.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Using this flight controller for my Dart 400 and fits great and works like a charm. Only thing is the USB connector is fragile and easy to break off from the board with constant use. Also i would prefer if the USB port was located on the side.

It's a good producto, nice size for small aircraft.
I'm using it on TBS Caipirinha, so is perfect by weight/size.

Just a recomendation, the wiring is wrong labeled on some outputs and you need to be very carefull to avoid confusions and make a damage to the board!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It's a good producto, nice size for small aircraft.
I'm using it on TBS Caipirinha, so is perfect by weight/size.

Just a recomendation, the wiring is wrong labeled on some outputs and you need to be very carefull to avoid confusions and make a damage to the board!

Having done many APM's I thought I would try this board.
Wasted Money.
The board takes at least 2 tries before loading the firmware, comms port times out over USB for the first load every time.
Once the firmware is loaded all seems to work until calibration.
Gyros have bad health and just keep drifting.
Mag field is bad and gives no readings.
Of course the board won't arm.
Cheap isn't cheap if the product is bad.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Having done many APM's I thought I would try this board.
Wasted Money.
The board takes at least 2 tries before loading the firmware, comms port times out over USB for the first load every time.
Once the firmware is loaded all seems to work until calibration.
Gyros have bad health and just keep drifting.
Mag field is bad and gives no readings.
Of course the board won't arm.
Cheap isn't cheap if the product is bad.

Board works just like my full size ones. I did find bad solder joints and one not connected at all for the motor outputs. Was an easy fix. I also switched the wires at the RX output connector so red is and Black is - . one thing be ready to splice in the GPS connectors as they are not standard on this board. It comes with the right pigtail ones but thought people should know.
I also learned It doesn't play well with Multistar esc's but that could be the esc fault. I should have bought Afros :(

I would recommend this board to a friend :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Board works just like my full size ones. I did find bad solder joints and one not connected at all for the motor outputs. Was an easy fix. I also switched the wires at the RX output connector so red is and Black is - . one thing be ready to splice in the GPS connectors as they are not standard on this board. It comes with the right pigtail ones but thought people should know.
I also learned It doesn't play well with Multistar esc's but that could be the esc fault. I should have bought Afros :(

I would recommend this board to a friend :)

I Battled to get the compass to work an then the USB connector broke off so I had to buy another unit

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I Battled to get the compass to work an then the USB connector broke off so I had to buy another unit

This is a fantastic variation of the original. Using it with Arduplane in a small FOV wing with Minimosd and is every big as good as it's big brother. Only downfall for me is the USB port. You must be very careful and sand off the lugs on the. USB cable, use some hot glue on it or solder a big more to the pads. APM is not for everybody, but I love it and minimosd is my favourite ( I use with my other APMs and Naza). Wing flies perfectly on default PIDs for me and I only really use it for emergency RTL.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a fantastic variation of the original. Using it with Arduplane in a small FOV wing with Minimosd and is every big as good as it's big brother. Only downfall for me is the USB port. You must be very careful and sand off the lugs on the. USB cable, use some hot glue on it or solder a big more to the pads. APM is not for everybody, but I love it and minimosd is my favourite ( I use with my other APMs and Naza). Wing flies perfectly on default PIDs for me and I only really use it for emergency RTL.

Bad product, poor quality soldering. USB connector fell off after the second connection. Problems with the barometer periodically holds no height and two flights twice suddenly rolled over and fell. Ordered a second instance, I hope it will be better quality.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bad product, poor quality soldering. USB connector fell off after the second connection. Problems with the barometer periodically holds no height and two flights twice suddenly rolled over and fell. Ordered a second instance, I hope it will be better quality.

Schn klein. Alles funktioniert wie es soll. Wird vom Missonplanner erkannt.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Schn klein. Alles funktioniert wie es soll. Wird vom Missonplanner erkannt.

honestly i LOVE hk BUT THIS ITEM IN A JIFFY BAG WILL NOT REACH U WELL.<BR>
Mine arrived DEAD the 3.3 v voltage transformer wasnt workign .
Therefore the unit is useless <BR>
GREAT weeks of Sheit RMA back and forth , coming now the fun and weeks of grounded .<BR>
<BR>And don't contact support they ake it worse .<BR>
Understand nothing and copypaste constantly they understand ..<BR>
Useless in 1 word <BR>

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

honestly i LOVE hk BUT THIS ITEM IN A JIFFY BAG WILL NOT REACH U WELL.<BR>
Mine arrived DEAD the 3.3 v voltage transformer wasnt workign .
Therefore the unit is useless <BR>
GREAT weeks of Sheit RMA back and forth , coming now the fun and weeks of grounded .<BR>
<BR>And don't contact support they ake it worse .<BR>
Understand nothing and copypaste constantly they understand ..<BR>
Useless in 1 word <BR>

Works good, as good as the older bro , will put up some pics soon

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works good, as good as the older bro , will put up some pics soon

  1. 1
  2. 2
Customer files
HK Mini APM - Wiring Helps v2 Download [571]
instructions Download [2732]
Telemetry solderless setup Download [464]
Wrong-VCC-GND default connectior cables Download [1844]
instructions - PDF Download [527]
Conector ISP HKPilot Mini Download [1]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save