Registrati

Product Finder

Impostazioni

Useful links

 
[["US","AU","GB","DE"]]
Registrati

Dipartimento Funzione I86 multi-rotore Control Board

Dipartimento Funzione I86 multi-rotore Control Board

Now save risparmia 0,00 € 0,00 €

16,60 €
Non disponibile!
Stock:
OUT OF STOCK
Peso:
25 g
SKU:
070000006

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descrizione
prodotto

Comandato da un micro controller basato Atmel Mega168PA 8-bit RISC e utilizzando un unico MEMS giroscopio a 3 assi della I86 multi-rotore Control Board Dipartimento Funzione Pubblica è in grado di 8 tipi di artigianato multi-rotore e 2 modalità di volo, senza la necessità di lampeggiare il microcontrollore . Le semplici sistemi di DIP switch permette di scelta rapida e semplice della vostra modalità di configurazione multi-rotore e volo desiderato.

Leggero e compatto la I86 può andare bene nel più piccolo di imbarcazioni e comprende un piccolo pezzo di nastro biadesivo per l'installazione.

La I86 Dipartimento Funzione Multi-Rotor Control Board supporta:
Aero (ala fissa)
doppio elicottero
Tri Copter
Quadrirotore X
Quadrirotore +
Hex Copter
H6 Copter
Y6 Copter
Tutte le modalità di cui sopra può essere impostato in modalità "Normal" oppure "Sport" modalità (default normale)

Specifiche:
Tensione di ingresso: 4 V a 6v
Segnale di ingresso: 50Hz PPM di serie
PWM Frequenza: 400Hz per ESC, 50Hz per i servi
scala Gyro: 500dps +/-, ODR: 800Hz
Temperatura di esercizio: -40 ° C a 85 ° C
Dimensioni: 40mm x 40mm
Peso: 8g

Product
Specifications

Ulteriori informazioni

  • SKU:
    070000006
  • Brand:
    HobbyKing
  • Peso (g)
    25.00
  • Lunghezza
    123.00
  • Larghezza:
    10.00
  • Altezza:
    80.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
great board
great price too took only a few minutes to set up
highly recommend this
board really good for filming with pots around 75pcnt
not so great for acro unless update firmware which is easily done with a usb asp i brought 2 !
Quality
Value
Overall
Quality
Value
Overall
Works well ! Quick and easy setup, good price!
Quality
Value
Overall
Quality
Value
Overall
Couldn't get it to work properly, even though, i did everything manual said. It starts shaking before you take off the ground. Maybe I didn't have enough experience with gain adjustment, but this was how I crashed my first quad...
I used it in st360 with multistar 20A ESCs and corona receiver.
Everything apart from shaking seems to be ok
Quality
Value
Overall
Quality
Value
Overall
Can't quite believe I missed this important bug when disarming. I nearly got a 11" prop at full speed in the eye and it has ruined my 3 DT750 motors.
Please do not be complacent like I was, this board has not been fixed since all the bad reports regarding the disarm bug. DO NOT USE IT FOR MULTIROTORs. I don't care that it only seems to do it for SimonK ESCs, this is just not acceptable safe programming of a flight controller. I will be asking for my money back and money for the 3 DT750s. Sorry HK, you simply are playing with fire by selling these boards.
Quality
Value
Overall
Quality
Value
Overall
Couldn't make my Y-6 fly stable with it - was almost uncontrollable with whatever tune-ups I've tried. Replaced with KK2.1 and on the 1st flight copter hovered in the middle of the room with my hands down. There are much better boards now than this one.
Quality
Value
Overall
Quality
Value
Overall
awesome controller , very flexible , easy to setup with dip switches , very stable
a good place to start in quadcopters
Quality
Value
Overall
Quality
Value
Overall
really chesp a great alternative to the kk board

Quality
Value
Overall
Quality
Value
Overall
a great budget board once set up. mine was a bit tricky as it turned out the motor diagram was wrong. motor 2 should be motor 1, 3 = 2, 4 = 3, 1 = 4, once that was sorted it all worked fine, only rudder needed reversing on the tranny, so for the maiden, stable in the hover, just a slight drift to the right. I can correct that with a bit of sub trim. so a great budget board to start flying multi rotor machines
Quality
Value
Overall
Quality
Value
Overall
I got two of these for a project quad. Works pretty well and easy to use. It just takes a little patience with the pitch, yaw, and roll pots. Once you have them set, quad flies very well.
Quality
Value
Overall
Quality
Value
Overall
Little bit complicated to get working properly, but nice to fly when done properly. No self leveling feature, but good for training maneuvers and orientation. Nice and very cheap controller.
Quality
Value
Overall
View all reviews
Upload
Videos
  • 900 Tricopter at Burfoot Park

  • Xcopter Scratch built with a HK i86 controller

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.