Become a Dealer Blog
Registrati

Prezzo totale

0,00 US$

Carrello della spesa 0 Carrello della spesa 0 Loading...

Dipartimento Funzione Pubblica i86AP Control Board stabilizzazione di volo

Generating Links

Dipartimento Funzione Pubblica i86AP Control Board stabilizzazione di volo

 
Prezzo:

Now save risparmia 0,00 US$ 0,00 US$

17,99 US$
Già acquistato Discontinued Product

Please continue searching for a similar product.
1 year warranty
SKU:
070000009
Spedizione gratuita? Clicca qui per saperne di più!

Accessori

Controllato da un microcontrollore Atmel basato Mega168PA 8-bit RISC e utilizzando una singola ad alta precisione a 3 assi MEMS giroscopio, la stabilizzazione di volo Control Board Dipartimento Funzione i86AP è in grado di stabilizzare il volo su quasi tutti i velivoli ad ala fissa! Esso fornisce una maggiore stabilità correggendo automaticamente i canali alettoni, elevatore e direzionale in volo. Questo compensa le modifiche indesiderate di atteggiamento del velivolo a causa del vento e altri fattori.

Supporta normale, ala volante (delta) e V-coda dell'aereo. La modalità può essere facilmente selezionato cambiando il ponticello a bordo a qualsiasi tipo di aeromobile di cui avete bisogno.

Leggero e compatto il i86AP può andare bene nel più piccolo degli aeromobili e comprende un piccolo pezzo di nastro biadesivo per l'installazione.

Caratteristiche:
Supporta normale, ala volante (delta) e gli aerei V-coda, facilmente selezionabile con ponticello a bordo
Supporta il volo 3D senza compromettere la stabilità
regolazione del guadagno del giroscopio indipendente per alettoni, elevatore e timone
Funzioni di base di impostazione tra cui bastone di centraggio e giroscopio inversione
Design compatto e leggero consente il montaggio nel più piccolo degli aerei

Specifiche:
Tensione di ingresso: 4V a 6V DC
PWM in uscita: 50Hz, 1020-2020us
Scala Gyro: +/- 1000dps
Frequenza di campionamento Gyro: 1KHz
Temperatura di esercizio: -40 ° C a 85 ° C
Dimensioni: 30mm x 40mm
Peso: 8g

richiesto:
3 x maschio a piombo servo maschio per collegare il ricevitore alla scheda di controllo


* Nota: Manuale dell'utente si trova sotto la scheda "file" di seguito.

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

__Giba | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Nov 30, 2012

No funciona. Quebrei dois avies por tentar usar esse estabilizador.
It does not work. I broke two planes for trying to use this stabilizer.

g2222 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Nov 09, 2012

Quick Review:
Pros:
- Cheap
- Durable
- Works ok

Cons:
- on flying wings, you'll want to solder the rudder signal pin to another signal pin for the board to start properly
- not nearly as precise as my dedicated 2 gyros (which are twice the price of the board) on a flying wing
- consequently hard to find the proper gain setting, generally either the wing over correct (= wooble at high speed), either it under correct (= don't see much effect)

Probably better for planes/wings which aren't flying too fast/where precision settings isn't all that important.

rocketscience | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Oct 22, 2012

What's great about this board is 1) size 2) pins out the side 3) can be used for delta wing. As mentioned already, make sure all 3 channels have input. So for delta wing, I used a Y splitter and sent aileron to the rudder even if there's no rudder. Or just send a signal to rudder from rudder (unused). But the Y makes it simple if you have a long run. Works great, my skyfun flies really steady now and fast. Not so scary to control now.

bgi82 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Oct 15, 2012

i build it in my bixler one and i think its nice. my videos are much better to look because there arent so many shakes an so on from the wind. very nice. i ordered 1 more stabilizer for my nano racer,i think it would be much easyer to fly this fast 4s racer when you mustnt make korrections while you make loops and so on.

pete5996 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Oct 07, 2012

Easy to fit and set up, this device has worked brilliantly for smoothing out the flight of a twitchy West Wings Fournier. It has made the difference between the model sitting unloved and rarely-flown to it now being a regular on the flightline! This stabiliser doesn't make you a better flyer and won't fly the aircraft for you - but it does make the flight look much more scale-like and the flying more enjoyable. Recommended. Just need HK to keep them in stock........
Don't forget the male-male servo leads!

ukrsonic | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Oct 05, 2012

That thing crashed my SebArt Sukhoi-29 3D plane.
I tested that thing on the ground and it worked just fine. When I took off (gave max throttle), the plane started spinning itself and then it hit the ground without control. So before you start flying it check it with max throttle on the ground. Try to shake the plane in different angles.
I hope it helps.

rampage-1 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Sep 06, 2012

Wow that Swift looks like it needs some work before it fly's. I don't know why HK would put this in the file section. The controller is great for the price.
It work as good as controllers like this twice the price. I am going to try HK Eagle Tree controller next.

Mechanik | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Sep 04, 2012

. , , .
.
, , &#108

flying fool | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Sep 01, 2012

I used the I86AP in a park zone T28 , It made it fly like it was on a rail. I think for the money it's a great item to help new flyers and also good to help old flyers train for three D flying. Have had no trouble with item after many flights. I will be buying more , please get them in stock. FLYING FOOL.

de-warehouse | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 31, 2012

Fr den Preis OK, leider nicht vom Sender aus zu justieren und nicht abschaltbar.

  1. 1
  2. 2
  3. 3
  4. 4
File dei clienti
User Manual Download [381]
i86AP Portugues Download [13]
Must Read Download [29]
i86AP on Mini Swift Download [1381]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!