New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Dipartimento Funzione Pubblica KK2.0 Multi-rotore LCD Control Board Flight

Dipartimento Funzione Pubblica KK2.0 Multi-rotore LCD Control Board Flight

Shipped From:
  • USA
  • Global
Discontinued Product

Please continue searching for a similar product.
SKU:
9171000073
WANT FREE SHIPPING? Click here to find out more!

Progettato dal Gran padre della rivoluzione KK, Rolf R Bakke, esclusivamente per Dipartimento Funzione Pubblica, il KK2.0 è l'evoluzione delle prime schede di controllo di volo generazione KK. Il KK2.0 è stato progettato da zero per portare volo multi-rotore a tutti, non solo gli esperti. Lo schermo LCD e costruito nel software rende installare e configurare più facile che mai. Una serie di tipi di artigianato multi-rotore sono pre-installati. è sufficiente selezionare il tipo di mestiere, controllare motore direzione di layout / elica, calibrare i CES e la radio e il tuo pronto ad andare! ognuno dei quali è fatto con facile seguire le istruzioni visualizzate a schermo!

Il sistema giroscopico originale KK è stato aggiornato per un incredibilmente sensibile a doppio circuito integrato a 3 assi giroscopio e singolo chip 3 sistema di assi dell'accelerometro rendendo questo il consiglio più stabile KK mai e consentendo l'aggiunta di una funzione di Auto-livello. Al centro del KK2.0 è un Atmel Mega324PA microcontroller 8-bit di AVR RISC-based con 32k di memoria. Un canali di uscita aggiuntivi 2 a motore sono stati aggiunti alla KK2.0 consentendo per un totale di 8 motori da controllare (Octocopter). Una comoda buzzer Piezo è anche incluso con la scheda per allarme audio quando attivare e disattivare la scheda.

Se il vostro nuovo in fuga multi-rotore o sono stati dubbi su come impostare una scheda KK poi il KK2.0 è stato costruito per voi. Il 6 Interfaccia di programmazione Pin USBasp AVR assicura aggiornamenti software in futuro sarà semplice e veloce.

Specifiche.
Dimensioni: 50,5 millimetri x 50,5 millimetri x 12mm
Peso: 21 grammi (Inc Piezo buzzer)
IC: Atmega324 PA
Gyro: InvenSense Inc.
Accelerometro: Anologue Devices Inc.
Auto-level:
Tensione in ingresso: 4.8-6.0V
Interfaccia AVR: Standard 6 pin.
Segnale dal ricevitore: 1520us (5 canali)
Segnale di ESC: 1520us
Firmware Version: 1.2

Ecco alcuni Come fare Vids:

Parte 1

Parte 2

Parte 3

Parte 4

Parte 5

Firmware preinstallato.
Dualcopter
Tricopter
Y6
Quadcopter +
Quadcopter X
Hexcopter +
Hexcopter X
Octocopter +
Octocopter X
X8 +
X8 X
H8
H6
V8
V6
Singlecopter 2M 2S
Singlecopter 1M 4S
(Mix personalizzato tramite il "Mixer Editor" opzione)

L'Editor Mixer consente di regolare dove e quanto segnale i motori ricevono da ingresso bastone e sensori. Ciò consente di creare qualsiasi configurazione possibile, con un massimo di 8 motori o servi.


Che cosa è una scheda multi-controllo del rotore si chiede?


Il controller Dipartimento Funzione KK2.0 multi-rotore è una scheda di controllo di volo per il multi-rotore Aerei (Tricopters, quadcopter, Hexcopters ecc). Il suo scopo è quello di stabilizzare l'aereo in volo. Per fare questo prende il segnale dal tre su giroscopi bordo (rollio, beccheggio e imbardata) quindi passa il segnale al Atmega324PA IC. L'unità Atmega324PA IC elabora poi questi segnali secondo il firmware utenti selezionati e passa i segnali di controllo ai regolatori di velocità elettronici installati (CES). Questi segnali istruiscono i CES per effettuare regolazioni di precisione ai motori velocità di rotazione che a sua volta si stabilizza vostro mestiere multi-rotore.

La scheda di controllo Dipartimento Funzione KK2.0 multi-rotore utilizza anche i segnali dal ricevitore sistemi radio (Rx) e passa questi segnali al Atmega324PA IC tramite gli ingressi Ail, ele, thr e Rud. Una volta che questa informazione è stato elaborato l'IC invierà variando segnali al CES che a loro volta regolano la velocità di rotazione di ciascun motore per indurre volo controllato (su, giù, indietro, avanti, sinistra, destra, imbardata).

Nota: Un manuale utente è disponibile nella scheda file.
* Le royalties pagate su ogni unità venduta Rolf R Bakke, il progettista originale KK.

  • SKU 9171000073
  • Brand HobbyKing
  • Capacità ( mAh ) -
  • Peso 55.0000
  • Lunghezza 71.00
  • Packaging Width 29.00
  • Altezza 70.00
  • Hobbyking KK2.0 Multi-rotor LCD Flight Control Board
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Thanks GOD and knock on wood for this board did NOT came defective, everything is working fine (I guess), I mounted on a Quad then move it to my Trycopter, I have NOT flashed it YET, so far so good. HW ver 2.15 FW ver 1.6 hex Tron ik

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Thanks GOD and knock on wood for this board did NOT came defective, everything is working fine (I guess), I mounted on a Quad then move it to my Trycopter, I have NOT flashed it YET, so far so good. HW ver 2.15 FW ver 1.6 hex Tron ik

An excellent flight controller and probably the best bang for your buck you are going to get. Advantages of this over say the Naza, is the OSD so you can tweak out in the field, where as the naza requires a laptop/usb to configure. For $30 odd dollars, you can afford to put it in your hobby projects - and when I say it will make anything fly, it will make anything fly. Be aware Naza dont do stock tricopters, so if you are doing a tricopter then this is the board for you. I have bought several of these, and never ever had one fail on me, production could be a tad better but it is a budget item.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

An excellent flight controller and probably the best bang for your buck you are going to get. Advantages of this over say the Naza, is the OSD so you can tweak out in the field, where as the naza requires a laptop/usb to configure. For $30 odd dollars, you can afford to put it in your hobby projects - and when I say it will make anything fly, it will make anything fly. Be aware Naza dont do stock tricopters, so if you are doing a tricopter then this is the board for you. I have bought several of these, and never ever had one fail on me, production could be a tad better but it is a budget item.

H550 Hexacopter with Plush 40A ESC and 1400kv Turnigy outrunners and KK2. Flys like a dream.

Great controller for your first multirotor machine. East to learn about PI settings at the touch of a button
www.youtube.com/watch?v=VwtWNcHNRpA

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

H550 Hexacopter with Plush 40A ESC and 1400kv Turnigy outrunners and KK2. Flys like a dream.

Great controller for your first multirotor machine. East to learn about PI settings at the touch of a button
www.youtube.com/watch?v=VwtWNcHNRpA

Perfect product!
I used them for Tricopters, Quadcopters and Hexacopter.
Just briliant!
See my YT chaneel: MrMarek166

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Perfect product!
I used them for Tricopters, Quadcopters and Hexacopter.
Just briliant!
See my YT chaneel: MrMarek166

this has to be the best thing ever for RC ,this was so simple to set up ,I also went on YOU-TUBE for other info on this product,there is a hole bunch of vidio's also,
.
This is very easy to set-up,,took me a few vidio's to do it from on line.me tri-copter works very well and flies great, just needs to be tweeked out just a bit GREAT PRODUCT I GIVE IT 5 Crowns,i need 2 more as soon as there in I will buy them.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this has to be the best thing ever for RC ,this was so simple to set up ,I also went on YOU-TUBE for other info on this product,there is a hole bunch of vidio's also,
.
This is very easy to set-up,,took me a few vidio's to do it from on line.me tri-copter works very well and flies great, just needs to be tweeked out just a bit GREAT PRODUCT I GIVE IT 5 Crowns,i need 2 more as soon as there in I will buy them.

no es que no funcione bien, pero lleva la version 1.2 y en AUTO LEVEL NO FUNCIONA BIEN. A si que te toca comprar lo de mas para poder actualizar lo. Y lo encontre en Ebay porque aqui no lo tienen.





verified_user Quality:
trending_up Value:
playlist_add_check Overall:

no es que no funcione bien, pero lleva la version 1.2 y en AUTO LEVEL NO FUNCIONA BIEN. A si que te toca comprar lo de mas para poder actualizar lo. Y lo encontre en Ebay porque aqui no lo tienen.





all I have to say is THIS IS DAMN GREAT thank GOD we have this I don't think I would have tried quad-copters, this is to easy ,all I did was follow the guys on you-tube to set it up and I little out side help from a friend 200 miles away. This is FANTASTIC!!!!! I need a couple more ,come on HK when will they be in stock again ?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

all I have to say is THIS IS DAMN GREAT thank GOD we have this I don't think I would have tried quad-copters, this is to easy ,all I did was follow the guys on you-tube to set it up and I little out side help from a friend 200 miles away. This is FANTASTIC!!!!! I need a couple more ,come on HK when will they be in stock again ?

Best flight board ever

It's so easy to use and setup

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Best flight board ever

It's so easy to use and setup

WOW FANTASTIC NO MORE TO SAY, this is the first time for me with quads in my case I did a tri-copter ,all I had to do was set it to tri-copter for the motors and with a little help from a friend I managed to set the rest ,also from you-tub vidio's it was very easy to do ,now im doing a quad but I need A FEW more CONTROLLERS .

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

WOW FANTASTIC NO MORE TO SAY, this is the first time for me with quads in my case I did a tri-copter ,all I had to do was set it to tri-copter for the motors and with a little help from a friend I managed to set the rest ,also from you-tub vidio's it was very easy to do ,now im doing a quad but I need A FEW more CONTROLLERS .

this is great this is the first time for me with a quadcopter in my case I did a tri-copter ,1 ward fastastic,i cant say a bad word about it ,all I had to do was set it for tri-copter and make a few adjustments ,and a little help from a friend that knew how to set them up. Just great cant beat it for the money ,I need a couple more HK when will they be back in stock?????????

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this is great this is the first time for me with a quadcopter in my case I did a tri-copter ,1 ward fastastic,i cant say a bad word about it ,all I had to do was set it for tri-copter and make a few adjustments ,and a little help from a friend that knew how to set them up. Just great cant beat it for the money ,I need a couple more HK when will they be back in stock?????????

Customer files
M1 and M2 soldert Download [2273]
kk20 the back side Download [2273]
HK User Manual KK2.0 Download [108]
X-copter with KK2 Download [2949]
KK2-ISP-Pinout (AVR USB Programmer) Download [177]
PVC Quad frame with GoPro Download [568]
HK KK2.0 card in the PVC frame Download [526]
FPV quad made with HK450 frame and KK2 Download [512]
No File Name Download [138]
No File Name Download [171]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save