New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Dipartimento Funzione Pubblica KK2.1HC multi-rotore Cassa Control Board Flight duro con Remote Programmer

Dipartimento Funzione Pubblica KK2.1HC multi-rotore Cassa Control Board Flight duro con Remote Programmer

Shipped From:
  • Global
QTY:

Now save risparmia 0,00 € 0,00 €

18,16 €
Stato:
Disponibile
SKU:
9171000268
WANT FREE SHIPPING? Click here to find out more!

La prossima evoluzione della rivoluzione rotore è qui !! Il KK2.1HC (Hard Case) è imballaggio nuovo potere trovato con sensori aggiornati, la memoria, i perni di intestazione, custodia rigida e programmatore remoto.

Il KK2.1HC è la prossima grande evoluzione delle prime schede di controllo di volo generazione KK. Il KK2.1HC è stato progettato da zero per portare volo multi-rotore a tutti, non solo gli esperti. Lo schermo LCD remoto e costruito nel software rende l'installazione e la configurazione più facile che mai. I pulsanti sullo schermo e di programmazione sono stati trasferiti ad un programmatore plug-in remoto e una custodia rigida installata, questo rende il KK estremamente resistente. La spina nel programmatore utilizza lo stesso formato esatto della versione a bordo e può essere inserito in qualsiasi momento per un cambiamento di valore rapido. Questo nuovo design permette al KK per essere installato in strutture in cui l'accesso ai pulsanti di bordo e lo schermo è stato un problema, si può anche lasciare il cavo collegato al lato KK ed eseguirlo per l'accesso al programmatore. Il caso duro conserva ancora i fori di montaggio 45mm standardizzati e ha il buzzer è ora montato internamente. Montaggio luoghi e danneggiare lo schermo LCD è un ricordo del passato.

Una serie di tipi di artigianato multi-rotore sono pre-installato, è sufficiente selezionare il tipo di mestiere, controllare il motore in direzione layout / elica, calibrare i CES e la radio e si è pronti a partire! Tutto ciò viene fatto con facile seguire le istruzioni visualizzate a schermo!

Il sistema giroscopico originale KK è stato aggiornato ad un sistema incredibilmente sensibile MPU 6050, rendendo questo il consiglio più stabile KK mai e consentendo l'aggiunta di una funzione di auto-level. Al centro del KK2.1HC è un Atmel Mega644PA microcontroller 8-bit di AVR RISC-based con 64 KB di memoria. Una polarità protetta intestazione aggiuntivo è stato aggiunto per il rilevamento della tensione, quindi non è necessario per la saldatura a bordo. Una comoda cicalino piezo è incluso anche per allarme acustico quando attivare e disattivare la scheda.

Il KK2.1HC aggiunto protezione contro la polarità all'intestazione tensione di senso e di bordo buzzer. La linea di tensione di rilevamento è stato aggiornato per una migliore precisione. Il caso duro è chiaramente etichettati, rendendo l'installazione ed i collegamenti in un attimo.

Se sei un nuovo volo multi-rotore o sono stati dubbi su come impostare una scheda KK poi il KK2.1HC è stato costruito per voi. L'interfaccia di programmazione 6 Pin USBasp AVR assicura aggiornamenti software in futuro sarà semplice e veloce.

Specifiche:
Dimensioni: 55mm x 55mm x 19mm
Peso: 32g
IC: Atmega644 PA
Gyro / Acc: 6050MPU InvenSense Inc.
Auto-level:
Tensione in ingresso: 4.8-6.0V
Interfaccia AVR: Standard 6 pin.
Segnale dal ricevitore: 1520us (5 canali)
Segnale di ESC: 1520us

Firmware Version: 1.6:
firmware preinstallato.
Dualcopter
Tricopter
Y6
Quadcopter +
Quadcopter X
Hexcopter +
Hexcopter X
Octocopter +
Octocopter X
X8 +
X8 X
H8
H6
V8
V6
Singlecopter 2M 2S
Singlecopter 1M 4S

(Mix personalizzato tramite il "Mixer Editor" opzione)

L'Editor Mixer consente di regolare dove e quanto segnale i motori ricevono da ingresso bastone e sensori. Ciò consente di creare qualsiasi configurazione possibile, con un massimo di 8 motori o servi.

* Nota: il programmatore non ha bisogno di rimanere collegato per la KK per operare, è sufficiente collegare in, programma, scollegare poi volare

** Nota: Si tratta di tutti i metodi consigliati per l'aggiornamento alla versione più recente del software come parte della configurazione iniziale (Questo è diverso da quello v1 6 per KK2.0.).

*** Nota: Il KK2.1HC utilizza lo stesso firmware come il KK2.1 ~ 2.1.5

  • SKU 9171000268
  • Brand HobbyKing
  • Capacità ( mAh ) -
  • Peso 120.0000
  • Lunghezza 180.00
  • Packaging Width 20.00
  • Altezza 100.00
  • HobbyKing KK HC
  • Howd to set a board like this up?
  • RC car gyro using a KK2.1HC Multi-Rotor Flight Control Board
  • RC UFO Flying Saucer
  • UFO Flying Saucer with Improved Tractor Beam
  • KK2 SingleCopter 2m 2s Maiden
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Great product, excellent! But you have to set it for proper operation

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great product, excellent! But you have to set it for proper operation

Well i plug her in. A simple task and right away the L.E.D. came up with Safe and Menu. After a few tries I was able to flick around the menu. Then I did something wrong and was unable to rearm my Quad. I look at You Tubes and found how to fix it all and off I went!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well i plug her in. A simple task and right away the L.E.D. came up with Safe and Menu. After a few tries I was able to flick around the menu. Then I did something wrong and was unable to rearm my Quad. I look at You Tubes and found how to fix it all and off I went!

very niceeeeeeeeeeeeeeeeeeeeeeeeeeeee

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very niceeeeeeeeeeeeeeeeeeeeeeeeeeeee

As know - a real great and easy to handle FC

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

As know - a real great and easy to handle FC

Don't buy this do yourself a favor and buy a naze32 rev 6 from a US supplier HK sucks and if you have to return anything they'll say they never received it and then what options do you really have when dealing with a foreign country?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Don't buy this do yourself a favor and buy a naze32 rev 6 from a US supplier HK sucks and if you have to return anything they'll say they never received it and then what options do you really have when dealing with a foreign country?

love the kk board greatproduct

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

love the kk board greatproduct

A multirotor[1] or multicopter is a rotorcraft with more than two rotors. An advantage of multirotor aircraft is the simpler rotor mechanics required for flight control. Unlike single- and double-rotor helicopters which use complex variable pitch rotors whose pitch varies as the blade rotates for flight stability and control, multirotors often use fixed-pitch blades; control of vehicle motion is achieved by varying the relative speed of each rotor to change the thrust and torque produced by each.



Due to their ease of both construction and control, multirotor aircraft are frequently used in radio control aircraft and UAV projects[2][3][4][5][6][7] in which the names tricopter, quadcopter, hexacopter and octocopter are frequently used to refer to 3-, 4-, 6- and 8-rotor helicopters, respectively.[8]





Hexacopter.[9]

In order to allow more power and stability at reduced weight coaxial rotors can be employed, in which each arm has two motors, running in opposite directions (one facing up and one facing down).[10] fgd

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A multirotor[1] or multicopter is a rotorcraft with more than two rotors. An advantage of multirotor aircraft is the simpler rotor mechanics required for flight control. Unlike single- and double-rotor helicopters which use complex variable pitch rotors whose pitch varies as the blade rotates for flight stability and control, multirotors often use fixed-pitch blades; control of vehicle motion is achieved by varying the relative speed of each rotor to change the thrust and torque produced by each.



Due to their ease of both construction and control, multirotor aircraft are frequently used in radio control aircraft and UAV projects[2][3][4][5][6][7] in which the names tricopter, quadcopter, hexacopter and octocopter are frequently used to refer to 3-, 4-, 6- and 8-rotor helicopters, respectively.[8]





Hexacopter.[9]

In order to allow more power and stability at reduced weight coaxial rotors can be employed, in which each arm has two motors, running in opposite directions (one facing up and one facing down).[10] fgd

Was running Multiwii boards in my Quads and liked them but never really was satisfied with them and lost interest in flying them. Bought one of these boards and Love them. Has renewed my interest in flying Quads. Simple and fast to program and not having to plug them in to a laptop to program is fantastic for me. Carry the little programmer in your pocket and away you go. Nice stable flight right out of the box, Thank you Hobbyking

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Was running Multiwii boards in my Quads and liked them but never really was satisfied with them and lost interest in flying them. Bought one of these boards and Love them. Has renewed my interest in flying Quads. Simple and fast to program and not having to plug them in to a laptop to program is fantastic for me. Carry the little programmer in your pocket and away you go. Nice stable flight right out of the box, Thank you Hobbyking

I have been in the RC hobby for many years and this is my first quad project. I used the red HK 250 frame, this controller, LD power race spec 1806 motor/esc kit (all US warehouse items). As others have done I put the unit in label up and it wouldn't calibrate the Y axis. once I turned it label down it calibrated. I got the instructions from the files tab above. (thank you who ever you are for that) The set up was very easy and straight forward. As advertised. The controller was a little big for the frame but I was able to modify the frame so it would fit between the top and bottom frame (building skill needed, If you are not a skilled builder then I would maybe suggest the KK2.1 (no hard case) do to the size. My quad flew very stable the very first flight on the default settings (not even trim needed) only thing I changed after the first flight was to change the yaw to 75pcnt from 50pcnt. now it flys perfect. NICE controller

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have been in the RC hobby for many years and this is my first quad project. I used the red HK 250 frame, this controller, LD power race spec 1806 motor/esc kit (all US warehouse items). As others have done I put the unit in label up and it wouldn't calibrate the Y axis. once I turned it label down it calibrated. I got the instructions from the files tab above. (thank you who ever you are for that) The set up was very easy and straight forward. As advertised. The controller was a little big for the frame but I was able to modify the frame so it would fit between the top and bottom frame (building skill needed, If you are not a skilled builder then I would maybe suggest the KK2.1 (no hard case) do to the size. My quad flew very stable the very first flight on the default settings (not even trim needed) only thing I changed after the first flight was to change the yaw to 75pcnt from 50pcnt. now it flys perfect. NICE controller

Right out of the box this fc was defective. The z accelerator was defective so could not calibrate. Poor customer service as I have to wait 2 weeks from the day they receive the unit before they will ship a replacement. So if I just order a new one they will not ship for free. That's why I will order a new fc from US supplier.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Right out of the box this fc was defective. The z accelerator was defective so could not calibrate. Poor customer service as I have to wait 2 weeks from the day they receive the unit before they will ship a replacement. So if I just order a new one they will not ship for free. That's why I will order a new fc from US supplier.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 8
Customer files
No File Name Download [2798]
on 450 quad Download [2798]
without box Download [5099]
BROKEN VOLTAGE SENSOR PINS on arrival by Download [2982]
kk2-1_1-9S1 Download [128]
H4 w/KK HC. PERFECT!!! Download [4598]
HK 2.1 manual (same as the hard case) Download [452]
Sheared voltage sensor (pwr) pin? Download [2005]
168mathlib_macros.inc Download [5]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save